[ANN] [BEN] Benjamins ◄ SHA-256 ►◄ BOUNTY AVAILABLE to make BEN merge mineable!! - page 77.

kovert

member

Activity: 86

Merit: 10

Quote from: vual on February 09, 2014, 02:10:11 AM

Quote from: HunterS on February 09, 2014, 02:02:37 AM

I WOULD JUST LIKE TO CONGRATULATE ALL THE FUKING MORONS THAT HAVE JUST ABOUT HALVED THE VALUE OF THIS COIN IN ONE DAY CAUSE THEY HAVE NO CLUE WHAT THE FUK THEY ARE DOING IN TRADE.
WELL DONE GUYS Grin

0.00000099 200COINS 0.000198 2014-02-09 16:47:53

NOW WHY THE FUK WOULD U SELL THEM THAT LOW
COMPLETE FUKING MORON

no need to complain, just means more for us to buy....
^_*

It wasnt me I swear it ..... What is a good opening price ?

bigenuf

newbie

Activity: 3

Merit: 0

Crackfoo, why can't i set a payout address on http://ben.hasher.ca i haven't received a confirmation email to unlock and your email on the site will not send either. Kind of pointless mining when you can't get your coins once mined. Huh

It's working now thanks. Grin

vual

hero member

Activity: 714

Merit: 500

Quote from: HunterS on February 09, 2014, 02:02:37 AM

I WOULD JUST LIKE TO CONGRATULATE ALL THE FUKING MORONS THAT HAVE JUST ABOUT HALVED THE VALUE OF THIS COIN IN ONE DAY CAUSE THEY HAVE NO CLUE WHAT THE FUK THEY ARE DOING IN TRADE.
WELL DONE GUYS Grin

0.00000099 200COINS 0.000198 2014-02-09 16:47:53

NOW WHY THE FUK WOULD U SELL THEM THAT LOW
COMPLETE FUKING MORON

no need to complain, just means more for us to buy....
^_*

HunterS

hero member

Activity: 644

Merit: 500

I WOULD JUST LIKE TO CONGRATULATE ALL THE FUKING MORONS THAT HAVE JUST ABOUT HALVED THE VALUE OF THIS COIN IN ONE DAY CAUSE THEY HAVE NO CLUE WHAT THE FUK THEY ARE DOING IN TRADE.
WELL DONE GUYS Grin

0.00000099 200COINS 0.000198 2014-02-09 16:47:53

NOW WHY THE FUK WOULD U SELL THEM THAT LOW
COMPLETE FUKING MORON

AllAboutTheBenjaminsBaby

full member

Activity: 140

Merit: 100

Quote from: mine2slow on February 08, 2014, 11:49:57 PM

Quote from: AllAboutTheBenjaminsBaby on February 08, 2014, 11:44:36 PM

Yea, no block source means no peer connected. Weird

the nodes keep changing... My list is a little old but still works. I go thru and ping em to clean up the node list from time to time.
bet many are dead by now...

getpeerinfo will show who is synced and connected to you

mine2slow

sr. member

Activity: 490

Merit: 250

Quote from: AllAboutTheBenjaminsBaby on February 08, 2014, 11:44:36 PM

Yea, no block source means no peer connected. Weird

the nodes keep changing... My list is a little old but still works. I go thru and ping em to clean up the node list from time to time.
bet many are dead by now...

also if you want to keep your node list semi private u can use connect= to use a specific node.
and removenode= to get rid of a node. (addnode )

this can be helpful too

https://en.bitcoin.it/wiki/Original_Bitcoin_client/API_calls_list

AllAboutTheBenjaminsBaby

full member

Activity: 140

Merit: 100

Yea, no block source means no peer connected. Weird

Poogasm

full member

Activity: 168

Merit: 100

Quote from: AllAboutTheBenjaminsBaby on February 08, 2014, 11:04:20 PM

Quote from: Poogasm on February 08, 2014, 11:02:22 PM

NOPE.

7 days behind.
balance of ZERO.

Sad

what the hell am I doing wrong?

I have the .conf in there with the nodes. I added -server to the shortcut for the wallet. I did a dance to the Ben gods....

You deleted everything except benjamins.conf and wallet.dat right?

Does it say Synchronizing with Network or No Block Source?

It says no block source available.

I am now going to try what mine2slow posted....

mine2slow

sr. member

Activity: 490

Merit: 250

Not sure why everyone uses a .bat file it's not needed, I use this for solo and I set all my solo miners to rpcport=8332 this can be whatever you want.
server=1 in the .conf is the same as -server in a bat works either way.

listen=1
daemon=1
server=1
gen=1
irc=0
logtimestamps=1
setaccount=benaddy
rpcallowip=192.168.1.*
rpcallowip=127.0.0.1
rpcuser=username
rpcpassword=password
rpcport=8332
rpcconnect=127.0.0.1
addnode=79.30.41.82
addnode=79.35.184.193
addnode=178.210.43.53
addnode=37.4.59.204
addnode=188.162.40.145
addnode=67.233.202.8
addnode=66.186.168.160
addnode=70.169.118.178
addnode=216.145.101.106
addnode=123.211.105.43
addnode=50.42.35.91
addnode=46.118.221.232
addnode=124.169.133.2
addnode=86.5.174.41
addnode=151.50.110.59
addnode=184.75.214.210
addnode=162.243.225.132

AllAboutTheBenjaminsBaby

full member

Activity: 140

Merit: 100

Quote from: Poogasm on February 08, 2014, 11:02:22 PM

NOPE.

7 days behind.
balance of ZERO.

Sad

what the hell am I doing wrong?

I have the .conf in there with the nodes. I added -server to the shortcut for the wallet. I did a dance to the Ben gods....

You deleted everything except benjamins.conf and wallet.dat right?

Does it say Synchronizing with Network or No Block Source?

Poogasm

full member

Activity: 168

Merit: 100

NOPE.

7 days behind.
balance of ZERO.

Sad

what the hell am I doing wrong?

I have the .conf in there with the nodes. I added -server to the shortcut for the wallet. I did a dance to the Ben gods....

AllAboutTheBenjaminsBaby

full member

Activity: 140

Merit: 100

Quote from: HunterS on February 08, 2014, 10:09:06 PM

Quote from: AllAboutTheBenjaminsBaby on February 08, 2014, 07:39:19 PM

Quote from: Poogasm on February 08, 2014, 07:31:26 PM

Quote from: AllAboutTheBenjaminsBaby on February 08, 2014, 06:49:51 PM

Quote from: Poogasm on February 08, 2014, 05:45:10 PM

Quote from: AllAboutTheBenjaminsBaby on February 08, 2014, 01:26:00 PM

Quote from: Poogasm on February 08, 2014, 01:24:14 PM

OH FFS!
No, I am not, I've never seen anyone ever explain -server is needed for the .conf to work, on any thread, about any coin, on any forum.
I am so far behind the curve, so much to learn...

*headdesk*

I will use my .bat and see what happens when I get home in a bit. See what happens.

I might be wrong, but I was under the impression that if you didn't launch as server, it didn't even try to read the .conf

Nope, still not syncing. I am going to leave it sitting there for a while longer, see if it does it when I am not staring at it.

But, just in case, can someone paste a complete working conf file for me to copy?

Please and thank you.

rpcuser=x
rpcpassword=pass
rpcallowip=127.0.0.1
rpcport=9336
server=1
gen=0
....

Been sitting there for a while now, not syncing.

Sad

uninstall, delete all but wallet.dat and try again?
Or am I just not crossing my eyes correctly when I run it?

You're using the .bat to launch as server? I would try deleting everything except wallet.dat and benjamins.conf - Might help if you clear the peers and block chain

u dont need a bat file just send a shortcut from your wallet qt to desktop
right click short cut and the bottom option should say PROPERTISES
add -server at end of target address
should look like this
G:\Mayhem\Wallets\Benjamins\benjamins-qt.exe -server

Ah, yea. That works, too, I'm just used to making the .bat

Is it working now?

HunterS

hero member

Activity: 644

Merit: 500

Quote from: AllAboutTheBenjaminsBaby on February 08, 2014, 07:39:19 PM

Quote from: Poogasm on February 08, 2014, 07:31:26 PM

Quote from: AllAboutTheBenjaminsBaby on February 08, 2014, 06:49:51 PM

Quote from: Poogasm on February 08, 2014, 05:45:10 PM

Quote from: AllAboutTheBenjaminsBaby on February 08, 2014, 01:26:00 PM

Quote from: Poogasm on February 08, 2014, 01:24:14 PM

OH FFS!
No, I am not, I've never seen anyone ever explain -server is needed for the .conf to work, on any thread, about any coin, on any forum.
I am so far behind the curve, so much to learn...

*headdesk*

I will use my .bat and see what happens when I get home in a bit. See what happens.

I might be wrong, but I was under the impression that if you didn't launch as server, it didn't even try to read the .conf

Nope, still not syncing. I am going to leave it sitting there for a while longer, see if it does it when I am not staring at it.

But, just in case, can someone paste a complete working conf file for me to copy?

Please and thank you.

rpcuser=x
rpcpassword=pass
rpcallowip=127.0.0.1
rpcport=9336
server=1
gen=0
....

Been sitting there for a while now, not syncing.

Sad

uninstall, delete all but wallet.dat and try again?
Or am I just not crossing my eyes correctly when I run it?

You're using the .bat to launch as server? I would try deleting everything except wallet.dat and benjamins.conf - Might help if you clear the peers and block chain

u dont need a bat file just send a shortcut from your wallet qt to desktop
right click short cut and the bottom option should say PROPERTISES
add -server at end of target address
should look like this
G:\Mayhem\Wallets\Benjamins\benjamins-qt.exe -server

vual

hero member

Activity: 714

Merit: 500

its not lost as long as you have wallet.dat.....
Did you add the nodes to your benjamins.conf file?

Poogasm

full member

Activity: 168

Merit: 100

Quote from: AllAboutTheBenjaminsBaby on February 08, 2014, 08:28:32 PM

Weird. Just make sure -server is in your .bat and just copy the .conf, that's what I'm using right now and I've got about 30 connections. You could always try opening port 9336 and see if that helps

Ben, yep, I am calling you that now,
I reinstalled after deleting the useless bits, still nothing.
I copied wallet.dat to my laptop and the conf and install it, same thing.

I am not sure what you mean by open port 9336, so I have not tried that.

I know I only have 680ish (I got more!) Bens in there, but it took me a lot of effort to get it and I hate to lose em...

Poogasm

full member

Activity: 168

Merit: 100

Quote from: vual on February 08, 2014, 08:33:23 PM

https://bitcointalksearch.org/topic/auction-workforcryptocom-wfc-turnkey-altcoin-money-making-site-449633

Revenue making website for sale, as auction, willing to accept BENS as payment....
Make a bid with your BENS.

I bid one not working wallet with 670 Ben in it... >.<

vual

hero member

Activity: 714

Merit: 500

https://bitcointalksearch.org/topic/auction-workforcryptocom-wfc-turnkey-altcoin-money-making-site-449633

Revenue making website for sale, as auction, willing to accept BENS as payment....
Make a bid with your BENS.

AllAboutTheBenjaminsBaby

full member

Activity: 140

Merit: 100

Weird. Just make sure -server is in your .bat and just copy the .conf, that's what I'm using right now and I've got about 30 connections. You could always try opening port 9336 and see if that helps

Poogasm

full member

Activity: 168

Merit: 100

Quote from: AllAboutTheBenjaminsBaby on February 08, 2014, 07:39:19 PM

Quote from: Poogasm on February 08, 2014, 07:31:26 PM

Quote from: AllAboutTheBenjaminsBaby on February 08, 2014, 06:49:51 PM

Quote from: Poogasm on February 08, 2014, 05:45:10 PM

Quote from: AllAboutTheBenjaminsBaby on February 08, 2014, 01:26:00 PM

Quote from: Poogasm on February 08, 2014, 01:24:14 PM

OH FFS!
No, I am not, I've never seen anyone ever explain -server is needed for the .conf to work, on any thread, about any coin, on any forum.
I am so far behind the curve, so much to learn...

*headdesk*

I will use my .bat and see what happens when I get home in a bit. See what happens.

I might be wrong, but I was under the impression that if you didn't launch as server, it didn't even try to read the .conf

Nope, still not syncing. I am going to leave it sitting there for a while longer, see if it does it when I am not staring at it.

But, just in case, can someone paste a complete working conf file for me to copy?

Please and thank you.

rpcuser=x
rpcpassword=pass
rpcallowip=127.0.0.1
rpcport=9336
server=1
gen=0
....

Been sitting there for a while now, not syncing.

Sad

uninstall, delete all but wallet.dat and try again?
Or am I just not crossing my eyes correctly when I run it?

You're using the .bat to launch as server? I would try deleting everything except wallet.dat and benjamins.conf - Might help if you clear the peers and block chain

Yes, I launched with the .bat.

I'll try deleting stuff after I find some food and a drink.

Thanks for helping, I do appreciate it.

Mortimer452

hero member

Activity: 532

Merit: 500

Quote from: yzzo on February 08, 2014, 04:22:57 PM

http://ben.pitythepool.com it's down Sad

We were having some intermittent issues with our primary internet connection earlier, we are running on backup line until we get them resolved. Everything working OK now!

Topic: [ANN] [BEN] Benjamins ◄ SHA-256 ►◄ BOUNTY AVAILABLE to make BEN merge mineable!! - page 77. (Read 94416 times)