People are mining 15-18 coins in one cycle how? Theres already those with over 1300 tokens who mine in shots like that.. whats the point
Guys using .02GWEI and getting all the coins..
Gas Price: 0.0000000002 Ether (0.2 Gwei) Actual Tx Cost/Fee: 0.000008401 Ether ($0.002469)
Topic: [ANN] BITCOINEREUM - NO ICO - NO PRE-MINE - LAUNCHED IN 2017 - page 5. (Read 9133 times)
so i just watched token transfers, waited til 9 mins and then sent a transfer and got a token. set a timer every 10 minutes and you win.. I was litterally the first to get the token of the current round
Yes you can do that
so i just watched token transfers, waited til 9 mins and then sent a transfer and got a token. set a timer every 10 minutes and you win.. I was litterally the first to get the token of the current round
Im feeling like this is a dumb method of 'mining' only 50 coins every 5 minutes.. it should be rewarded divided into how many people in those 5 minutes paid gas to mine the coins. This is more like a mining lottery. Doesnt matter what gas you use, ive tried it all. At this rate I've wasted a few dollars just to get 1 single BTCM coin. I cant auto-mine with geth as I use MetaMask and there is no keystore file you can export only private key. I was hoping this would be something worth while but trying to win a lotto every 5 minutes burning gas doesnt seem worth it. If the mining rewards were split into even for the number of people for the 5 minutes it would make a lot more sense.
Well first it's not every every 5 minutes, it's every 10 minutes (like bitcoin in normal conditions).
Second, you don't need to use your MetaMask account, you can create a new account on geth and then transfer your mined coins to your MetaMask or other address.
Third, the gas fees are important because it gives a non-constant cost to the transactions.
You can take more risk by sending a low fee but if you succeed you get them cheap, but you can also send a higher fee and you get them faster with less risk.
Im feeling like this is a dumb method of 'mining' only 50 coins every 5 minutes.. it should be rewarded divided into how many people in those 5 minutes paid gas to mine the coins. This is more like a mining lottery. Doesnt matter what gas you use, ive tried it all. At this rate I've wasted a few dollars just to get 1 single BTCM coin. I cant auto-mine with geth as I use MetaMask and there is no keystore file you can export only private key. I was hoping this would be something worth while but trying to win a lotto every 5 minutes burning gas doesnt seem worth it. If the mining rewards were split into even for the number of people for the 5 minutes it would make a lot more sense.
> startMining(10)
Error: exceeds block gas limit
at web3.js:3143:20
at web3.js:6347:15
at web3.js:5081:36
at startMining (:3:1)
at:1:1
OK guys I finally got the function to run...however I got the above error. Another poster had commented that he got the same error and someone suggested that he try 2 gwei and send 0 eth.
Well i set it to 2 gwei, but where or how do I set the send 0 eth. If it is not in the script isnt it already sending 0 eth?
Error: exceeds block gas limit
at web3.js:3143:20
at web3.js:6347:15
at web3.js:5081:36
at startMining (
at
OK guys I finally got the function to run...however I got the above error. Another poster had commented that he got the same error and someone suggested that he try 2 gwei and send 0 eth.
Well i set it to 2 gwei, but where or how do I set the send 0 eth. If it is not in the script isnt it already sending 0 eth?
This can be because you are not synced with the network as the gas limit of the old blocks was lower than the current ones.
Suggest you to sync up with the network, to sync you just need to leave geth running (you may need up to 30 GB free space in your PC, normally in 1 night it should get synced).
To check if you are synced with the network you can run the command eth.blockNumber (run it on the geth attach windows), the result should the current ETH block (you can check the latest block number here: https://etherscan.io/
If the problem continues after this let us know
OOOHHHH
No wonder. OK. I mean that's a pretty critical part of the instructions
. If news like me dont know what geth is we def dont know that we need to sync. I guess this will take longer to figure out then I thought. Thanks for the reply OP. > startMining(10)
Error: exceeds block gas limit
at web3.js:3143:20
at web3.js:6347:15
at web3.js:5081:36
at startMining (:3:1)
at:1:1
OK guys I finally got the function to run...however I got the above error. Another poster had commented that he got the same error and someone suggested that he try 2 gwei and send 0 eth.
Well i set it to 2 gwei, but where or how do I set the send 0 eth. If it is not in the script isnt it already sending 0 eth?
Error: exceeds block gas limit
at web3.js:3143:20
at web3.js:6347:15
at web3.js:5081:36
at startMining (
at
OK guys I finally got the function to run...however I got the above error. Another poster had commented that he got the same error and someone suggested that he try 2 gwei and send 0 eth.
Well i set it to 2 gwei, but where or how do I set the send 0 eth. If it is not in the script isnt it already sending 0 eth?
This can be because you are not synced with the network as the gas limit of the old blocks was lower than the current ones.
Suggest you to sync up with the network, to sync you just need to leave geth running (you may need up to 30 GB free space in your PC, normally in 1 night it should get synced).
To check if you are synced with the network you can run the command eth.blockNumber (run it on the geth attach windows), the result should be the current ETH block (you can check the latest block number here: https://etherscan.io/)
If the problem continues after this let us know
Very interesting idea, minimum qualification of gas that you put
so I managed to mine with 100000 ..
so I managed to mine with 100000 ..
I ran
eth.getBlock("latest")
and it returned gaslimit: 5000
I think that is the problem with the gaslimit exceeds error...
Can someone tell me how to change the genesis json to a higher gaslimit
Picture here https://i.imgur.com/GIjouoW.png
eth.getBlock("latest")
and it returned gaslimit: 5000
I think that is the problem with the gaslimit exceeds error...
Can someone tell me how to change the genesis json to a higher gaslimit
Picture here https://i.imgur.com/GIjouoW.png
> startMining(10)
Error: exceeds block gas limit
at web3.js:3143:20
at web3.js:6347:15
at web3.js:5081:36
at startMining (:3:1)
at:1:1
OK guys I finally got the function to run...however I got the above error. Another poster had commented that he got the same error and someone suggested that he try 2 gwei and send 0 eth.
Well i set it to 2 gwei, but where or how do I set the send 0 eth. If it is not in the script isnt it already sending 0 eth?
Error: exceeds block gas limit
at web3.js:3143:20
at web3.js:6347:15
at web3.js:5081:36
at startMining (
at
OK guys I finally got the function to run...however I got the above error. Another poster had commented that he got the same error and someone suggested that he try 2 gwei and send 0 eth.
Well i set it to 2 gwei, but where or how do I set the send 0 eth. If it is not in the script isnt it already sending 0 eth?
How many tokens will be sold during the ICO?
There was no ICO held for this token it's public mining project you should read the OP all instructions written there. Link is given below how to own this token with mining process.
http://bitcoinereum.com/#mine-btcm
Really? You sure undefined is normal?
OK because I did the last step to paste the script and it also gave me undefined...in any case, I dont think the script is working. And I did everything OP said to do. What does it look like when it runs?
see this image
https://i.imgur.com/Ym20gEp.png
OK because I did the last step to paste the script and it also gave me undefined...in any case, I dont think the script is working. And I did everything OP said to do. What does it look like when it runs?
see this image
https://i.imgur.com/Ym20gEp.png
Undefined is normal. I have had the same message. After then entering startMining(10) it started sending transactions.
OH you mean you have to enter the "10" in startMining(10) ??
The directions did not say that... sorry im a big newb at this. Is there anything else I need to input between brackets other than the startMining(10)
It says in the instructions:
https://imgur.com/a/baDlW
That should be it, it should start mining automatically after that
Really? You sure undefined is normal?
OK because I did the last step to paste the script and it also gave me undefined...in any case, I dont think the script is working. And I did everything OP said to do. What does it look like when it runs?
see this image
https://i.imgur.com/Ym20gEp.png
OK because I did the last step to paste the script and it also gave me undefined...in any case, I dont think the script is working. And I did everything OP said to do. What does it look like when it runs?
see this image
https://i.imgur.com/Ym20gEp.png
Undefined is normal. I have had the same message. After then entering startMining(10) it started sending transactions.
OH you mean you have to enter the "10" in startMining(10) ??
The directions did not say that... sorry im a big newb at this. Is there anything else I need to input between brackets other than the startMining(10)
Really? You sure undefined is normal?
OK because I did the last step to paste the script and it also gave me undefined...in any case, I dont think the script is working. And I did everything OP said to do. What does it look like when it runs?
see this image
https://i.imgur.com/Ym20gEp.png
OK because I did the last step to paste the script and it also gave me undefined...in any case, I dont think the script is working. And I did everything OP said to do. What does it look like when it runs?
see this image
https://i.imgur.com/Ym20gEp.png
Undefined is normal. I have had the same message. After then entering startMining(10) it started sending transactions.
OP
Step 1-4 for Geth is OK. I am on step 5 and I get this error in the console.
https://i.imgur.com/NA6V4z0.png
undefined
> var contract = web3.eth.contract(abi).at("0x03df4c372a29376d2c8df33a1b5f001cd8d68b0e");
undefined
> var getData = contract.Mine.getData();
undefined
Please advise.
Step 1-4 for Geth is OK. I am on step 5 and I get this error in the console.
https://i.imgur.com/NA6V4z0.png
undefined
> var contract = web3.eth.contract(abi).at("0x03df4c372a29376d2c8df33a1b5f001cd8d68b0e");
undefined
> var getData = contract.Mine.getData();
undefined
Please advise.
They says in the website:
"6- Once your wallet is unlocked, paste the following lines in the console (seeing undefined after you do this is normal): "
So just move along to point 7...
Really? You sure undefined is normal?
OK because I did the last step to paste the script and it also gave me undefined...in any case, I dont think the script is working. And I did everything OP said to do. What does it look like when it runs?
see this image
https://i.imgur.com/Ym20gEp.png
OP
Step 1-4 for Geth is OK. I am on step 5 and I get this error in the console.
https://i.imgur.com/NA6V4z0.png
undefined
> var contract = web3.eth.contract(abi).at("0x03df4c372a29376d2c8df33a1b5f001cd8d68b0e");
undefined
> var getData = contract.Mine.getData();
undefined
Please advise.
Step 1-4 for Geth is OK. I am on step 5 and I get this error in the console.
https://i.imgur.com/NA6V4z0.png
undefined
> var contract = web3.eth.contract(abi).at("0x03df4c372a29376d2c8df33a1b5f001cd8d68b0e");
undefined
> var getData = contract.Mine.getData();
undefined
Please advise.
They says in the website:
"6- Once your wallet is unlocked, paste the following lines in the console (seeing undefined after you do this is normal): "
So just move along to point 7...
OP
Step 1-4 for Geth is OK. I am on step 5 and I get this error in the console.
https://i.imgur.com/NA6V4z0.png
undefined
> var contract = web3.eth.contract(abi).at("0x03df4c372a29376d2c8df33a1b5f001cd8d68b0e");
undefined
> var getData = contract.Mine.getData();
undefined
Please advise.
Step 1-4 for Geth is OK. I am on step 5 and I get this error in the console.
https://i.imgur.com/NA6V4z0.png
undefined
> var contract = web3.eth.contract(abi).at("0x03df4c372a29376d2c8df33a1b5f001cd8d68b0e");
undefined
> var getData = contract.Mine.getData();
undefined
Please advise.
What does this mean? I am using Meta and tried to import my exported key but the path returns "Error: no key for given address or file"
"Make sure your wallet file is on the Ethereum keystore folder"
"Make sure your wallet file is on the Ethereum keystore folder"
How many tokens will be sold during the ICO?
If there is a fee if i want to mine?
Jump to: