Pages:
Author

Topic: [ANN] Bittrex / Poloniex / Cryptsy All Coin Trading Software, Quatloo Trader. - page 42. (Read 236646 times)

member
Activity: 74
Merit: 10
I'm asking again, in case Markus or rdyoung or somebody else could give an answer about it...

Hey, this question has been raised many times in the past, but it's still unsolved for me...

Here it is: the market list for cryptsy cannot be loaded.

I've tried with my usual account, a newly created one, and on several windows versions (32 bits and 64 bits). None of my attempts are successful and I'm sure that I use the correct keys. How come that it works for some users and not for others? Is there any chance for it to be fixed some day?

Thanks.

Can you open a cmd prompt and ping api.cryptsy.com? The only thing I can think of is that maybe your connection to cryptsy is blocked or limited in someway.
If you can ping and or tracert api.cryptsy.com it should tell you what the issue might be.

I have the same issue. Anyway, cryptsy API does work in other trading program.

I am at a loss then. There is no logical reason for the cryptsy api to work in one bot and not in this one, especially if they are being run on the same system with the same firewall, router, etc. The fact that it works for most people tells me the issue is on the users end somewhere. If your trading with enough funds to make it worth it, grab a vps from amazon or vultr and use it to run the bot, you will have better uptime and a faster connection to the apis.

my internet connection is fast. there should be no problem
interesting behaviour of qtl bittrex-polo arb: if i leave "holdings to use" and "percentage" fields as is (with decimal part) it wont trade
if i remove decimal part and leave integer - it will do trade

maybe problem is here - how decimal part is presented - with "." or "," (english and non english windows regional settings)


My internet connection is fast as well 30/10, but I notice a big big difference when running the bot from my vps with vultr and my home system. If your not in the usa, then it doesn't matter how fast your connection is, your still further away from the vps servers and this could cause some lag and packets being dropped, every hop between you and end point is another chance for something to go wrong.  It could also be what you say about the regional settings, maybe reach out to markus via pm and see if he can shed any light, or is it possible to setup a vm and have the kb set to english and see if it works?

Maybe I'll try to set regional settings to english when I will install win10 upgrade. As for Markus- looks like he dont care about this app anymore. Last real activity was in autumn 2014

He was here about a month ago and mentioned that he was adding polo-cryptsy as an arb option because they both offer push apis, instantaneous trading rather than the current way of doing it. He has also mentioned that his day job keeps putting him on odd and long shifts, so its hard for him to dedicate the time needed to getting the next version released.

Here are 3 posts of his going from april to may of 2015. I would say that he has at least said he still cares and wants to continue development.
https://bitcointalksearch.org/topic/m.11405835
https://bitcointalksearch.org/topic/m.11265844
https://bitcointalksearch.org/topic/m.11159181


Well, he promise "updates next two monthes, month, week etc" since december. But nothing happens. At least that bittrex bug solved itself somehow and qtl trader still works.
legendary
Activity: 994
Merit: 1000
I'm asking again, in case Markus or rdyoung or somebody else could give an answer about it...

Hey, this question has been raised many times in the past, but it's still unsolved for me...

Here it is: the market list for cryptsy cannot be loaded.

I've tried with my usual account, a newly created one, and on several windows versions (32 bits and 64 bits). None of my attempts are successful and I'm sure that I use the correct keys. How come that it works for some users and not for others? Is there any chance for it to be fixed some day?

Thanks.

Can you open a cmd prompt and ping api.cryptsy.com? The only thing I can think of is that maybe your connection to cryptsy is blocked or limited in someway.
If you can ping and or tracert api.cryptsy.com it should tell you what the issue might be.

I have the same issue. Anyway, cryptsy API does work in other trading program.

I am at a loss then. There is no logical reason for the cryptsy api to work in one bot and not in this one, especially if they are being run on the same system with the same firewall, router, etc. The fact that it works for most people tells me the issue is on the users end somewhere. If your trading with enough funds to make it worth it, grab a vps from amazon or vultr and use it to run the bot, you will have better uptime and a faster connection to the apis.

my internet connection is fast. there should be no problem
interesting behaviour of qtl bittrex-polo arb: if i leave "holdings to use" and "percentage" fields as is (with decimal part) it wont trade
if i remove decimal part and leave integer - it will do trade

maybe problem is here - how decimal part is presented - with "." or "," (english and non english windows regional settings)


My internet connection is fast as well 30/10, but I notice a big big difference when running the bot from my vps with vultr and my home system. If your not in the usa, then it doesn't matter how fast your connection is, your still further away from the vps servers and this could cause some lag and packets being dropped, every hop between you and end point is another chance for something to go wrong.  It could also be what you say about the regional settings, maybe reach out to markus via pm and see if he can shed any light, or is it possible to setup a vm and have the kb set to english and see if it works?

Maybe I'll try to set regional settings to english when I will install win10 upgrade. As for Markus- looks like he dont care about this app anymore. Last real activity was in autumn 2014

He was here about a month ago and mentioned that he was adding polo-cryptsy as an arb option because they both offer push apis, instantaneous trading rather than the current way of doing it. He has also mentioned that his day job keeps putting him on odd and long shifts, so its hard for him to dedicate the time needed to getting the next version released.

Here are 3 posts of his going from april to may of 2015. I would say that he has at least said he still cares and wants to continue development.
https://bitcointalksearch.org/topic/m.11405835
https://bitcointalksearch.org/topic/m.11265844
https://bitcointalksearch.org/topic/m.11159181
member
Activity: 74
Merit: 10
I'm asking again, in case Markus or rdyoung or somebody else could give an answer about it...

Hey, this question has been raised many times in the past, but it's still unsolved for me...

Here it is: the market list for cryptsy cannot be loaded.

I've tried with my usual account, a newly created one, and on several windows versions (32 bits and 64 bits). None of my attempts are successful and I'm sure that I use the correct keys. How come that it works for some users and not for others? Is there any chance for it to be fixed some day?

Thanks.

Can you open a cmd prompt and ping api.cryptsy.com? The only thing I can think of is that maybe your connection to cryptsy is blocked or limited in someway.
If you can ping and or tracert api.cryptsy.com it should tell you what the issue might be.

I have the same issue. Anyway, cryptsy API does work in other trading program.

I am at a loss then. There is no logical reason for the cryptsy api to work in one bot and not in this one, especially if they are being run on the same system with the same firewall, router, etc. The fact that it works for most people tells me the issue is on the users end somewhere. If your trading with enough funds to make it worth it, grab a vps from amazon or vultr and use it to run the bot, you will have better uptime and a faster connection to the apis.

my internet connection is fast. there should be no problem
interesting behaviour of qtl bittrex-polo arb: if i leave "holdings to use" and "percentage" fields as is (with decimal part) it wont trade
if i remove decimal part and leave integer - it will do trade

maybe problem is here - how decimal part is presented - with "." or "," (english and non english windows regional settings)


My internet connection is fast as well 30/10, but I notice a big big difference when running the bot from my vps with vultr and my home system. If your not in the usa, then it doesn't matter how fast your connection is, your still further away from the vps servers and this could cause some lag and packets being dropped, every hop between you and end point is another chance for something to go wrong.  It could also be what you say about the regional settings, maybe reach out to markus via pm and see if he can shed any light, or is it possible to setup a vm and have the kb set to english and see if it works?

Maybe I'll try to set regional settings to english when I will install win10 upgrade. As for Markus- looks like he dont care about this app anymore. Last real activity was in autumn 2014
legendary
Activity: 994
Merit: 1000
I'm asking again, in case Markus or rdyoung or somebody else could give an answer about it...

Hey, this question has been raised many times in the past, but it's still unsolved for me...

Here it is: the market list for cryptsy cannot be loaded.

I've tried with my usual account, a newly created one, and on several windows versions (32 bits and 64 bits). None of my attempts are successful and I'm sure that I use the correct keys. How come that it works for some users and not for others? Is there any chance for it to be fixed some day?

Thanks.

Can you open a cmd prompt and ping api.cryptsy.com? The only thing I can think of is that maybe your connection to cryptsy is blocked or limited in someway.
If you can ping and or tracert api.cryptsy.com it should tell you what the issue might be.

I have the same issue. Anyway, cryptsy API does work in other trading program.

I am at a loss then. There is no logical reason for the cryptsy api to work in one bot and not in this one, especially if they are being run on the same system with the same firewall, router, etc. The fact that it works for most people tells me the issue is on the users end somewhere. If your trading with enough funds to make it worth it, grab a vps from amazon or vultr and use it to run the bot, you will have better uptime and a faster connection to the apis.

my internet connection is fast. there should be no problem
interesting behaviour of qtl bittrex-polo arb: if i leave "holdings to use" and "percentage" fields as is (with decimal part) it wont trade
if i remove decimal part and leave integer - it will do trade

maybe problem is here - how decimal part is presented - with "." or "," (english and non english windows regional settings)


My internet connection is fast as well 30/10, but I notice a big big difference when running the bot from my vps with vultr and my home system. If your not in the usa, then it doesn't matter how fast your connection is, your still further away from the vps servers and this could cause some lag and packets being dropped, every hop between you and end point is another chance for something to go wrong.  It could also be what you say about the regional settings, maybe reach out to markus via pm and see if he can shed any light, or is it possible to setup a vm and have the kb set to english and see if it works?
member
Activity: 74
Merit: 10
I'm asking again, in case Markus or rdyoung or somebody else could give an answer about it...

Hey, this question has been raised many times in the past, but it's still unsolved for me...

Here it is: the market list for cryptsy cannot be loaded.

I've tried with my usual account, a newly created one, and on several windows versions (32 bits and 64 bits). None of my attempts are successful and I'm sure that I use the correct keys. How come that it works for some users and not for others? Is there any chance for it to be fixed some day?

Thanks.

Can you open a cmd prompt and ping api.cryptsy.com? The only thing I can think of is that maybe your connection to cryptsy is blocked or limited in someway.
If you can ping and or tracert api.cryptsy.com it should tell you what the issue might be.

I have the same issue. Anyway, cryptsy API does work in other trading program.

I am at a loss then. There is no logical reason for the cryptsy api to work in one bot and not in this one, especially if they are being run on the same system with the same firewall, router, etc. The fact that it works for most people tells me the issue is on the users end somewhere. If your trading with enough funds to make it worth it, grab a vps from amazon or vultr and use it to run the bot, you will have better uptime and a faster connection to the apis.

my internet connection is fast. there should be no problem
interesting behaviour of qtl bittrex-polo arb: if i leave "holdings to use" and "percentage" fields as is (with decimal part) it wont trade
if i remove decimal part and leave integer - it will do trade

maybe problem is here - how decimal part is presented - with "." or "," (english and non english windows regional settings)
legendary
Activity: 994
Merit: 1000
I'm asking again, in case Markus or rdyoung or somebody else could give an answer about it...

Hey, this question has been raised many times in the past, but it's still unsolved for me...

Here it is: the market list for cryptsy cannot be loaded.

I've tried with my usual account, a newly created one, and on several windows versions (32 bits and 64 bits). None of my attempts are successful and I'm sure that I use the correct keys. How come that it works for some users and not for others? Is there any chance for it to be fixed some day?

Thanks.

Can you open a cmd prompt and ping api.cryptsy.com? The only thing I can think of is that maybe your connection to cryptsy is blocked or limited in someway.
If you can ping and or tracert api.cryptsy.com it should tell you what the issue might be.

I have the same issue. Anyway, cryptsy API does work in other trading program.

I am at a loss then. There is no logical reason for the cryptsy api to work in one bot and not in this one, especially if they are being run on the same system with the same firewall, router, etc. The fact that it works for most people tells me the issue is on the users end somewhere. If your trading with enough funds to make it worth it, grab a vps from amazon or vultr and use it to run the bot, you will have better uptime and a faster connection to the apis.
full member
Activity: 178
Merit: 100
Is there a plan to add ccex to the bot?
member
Activity: 74
Merit: 10
I'm asking again, in case Markus or rdyoung or somebody else could give an answer about it...

Hey, this question has been raised many times in the past, but it's still unsolved for me...

Here it is: the market list for cryptsy cannot be loaded.

I've tried with my usual account, a newly created one, and on several windows versions (32 bits and 64 bits). None of my attempts are successful and I'm sure that I use the correct keys. How come that it works for some users and not for others? Is there any chance for it to be fixed some day?

Thanks.

Can you open a cmd prompt and ping api.cryptsy.com? The only thing I can think of is that maybe your connection to cryptsy is blocked or limited in someway.
If you can ping and or tracert api.cryptsy.com it should tell you what the issue might be.

I have the same issue. Anyway, cryptsy API does work in other trading program.
legendary
Activity: 994
Merit: 1000
I'm asking again, in case Markus or rdyoung or somebody else could give an answer about it...

Hey, this question has been raised many times in the past, but it's still unsolved for me...

Here it is: the market list for cryptsy cannot be loaded.

I've tried with my usual account, a newly created one, and on several windows versions (32 bits and 64 bits). None of my attempts are successful and I'm sure that I use the correct keys. How come that it works for some users and not for others? Is there any chance for it to be fixed some day?

Thanks.

Can you open a cmd prompt and ping api.cryptsy.com? The only thing I can think of is that maybe your connection to cryptsy is blocked or limited in someway.
If you can ping and or tracert api.cryptsy.com it should tell you what the issue might be.
newbie
Activity: 8
Merit: 0
I'm asking again, in case Markus or rdyoung or somebody else could give an answer about it...

Hey, this question has been raised many times in the past, but it's still unsolved for me...

Here it is: the market list for cryptsy cannot be loaded.

I've tried with my usual account, a newly created one, and on several windows versions (32 bits and 64 bits). None of my attempts are successful and I'm sure that I use the correct keys. How come that it works for some users and not for others? Is there any chance for it to be fixed some day?

Thanks.
legendary
Activity: 994
Merit: 1000
I just got myself enough Quatloos to enable the Bittrex-Poloniex arbitrage option, but I'm having some issues.  I have BTC in both exchanges, I go to the Arbitrage/Bittrex-Poloniex tab, set my percentages and load the markets.  When I choose a market and click 'Add Market to Monitor list' though, I get an error message (something along the lines of 'Object reference not set to an instance of an object').  Anyone know how to fix this?  Or is there a support email somewhere I can send this off to?

This error pops up when there is api issue with one of the exchanges, usually bittrex or cryptsy. In your bitt-polo case, I would say its bittrex having an issue. Just hit continue and keep trying, you will eventually get things up and running.
newbie
Activity: 47
Merit: 0
I just got myself enough Quatloos to enable the Bittrex-Poloniex arbitrage option, but I'm having some issues.  I have BTC in both exchanges, I go to the Arbitrage/Bittrex-Poloniex tab, set my percentages and load the markets.  When I choose a market and click 'Add Market to Monitor list' though, I get an error message (something along the lines of 'Object reference not set to an instance of an object').  Anyone know how to fix this?  Or is there a support email somewhere I can send this off to?

If you buy a few coins of the one you choose in "add market to monitor list" it works.
newbie
Activity: 1
Merit: 0
I just got myself enough Quatloos to enable the Bittrex-Poloniex arbitrage option, but I'm having some issues.  I have BTC in both exchanges, I go to the Arbitrage/Bittrex-Poloniex tab, set my percentages and load the markets.  When I choose a market and click 'Add Market to Monitor list' though, I get an error message (something along the lines of 'Object reference not set to an instance of an object').  Anyone know how to fix this?  Or is there a support email somewhere I can send this off to?
hero member
Activity: 826
Merit: 1000
see my profile
I am not sure if I asked this already, or someone else, perhaps there is a ready answer to this already?

I found my old post about this:

... Now with Quatloo Trader, and Comodo Firewall + HIPS, that has become tedious.
I counted 48 clicks to teach Comodo. What are they?
...
They are all similiar to these ones:

...
And the (incomplete) exported rulesets look are these:
...
Code:



...
...

More detailed there, post #1017

The "comodo sucks" side discussion took us away from my question.
AFAICS it never got answered?
hero member
Activity: 826
Merit: 1000
see my profile
I am not sure if I asked this already, or someone else, perhaps there is a ready answer to this already?

Comodo internal firewall Defense+ is wondering about a lot of changes in the registry when quatlootrader is started.
A recent FW upgrade brought them up again, that's why I am seeing them again now.

Some of them include:

"modify the protected registry key ... HKLM\System\ControlSet001\Services ..."

* Tcpip\Parameters
* system policies
* smartcard
* ...

I am wondering what all that is. Why does Quatloo trader have to modify registry keys deep in the registry where security settings are stored?

It might mean nothing, I am just curious for some explanations.

Thanks.

jr. member
Activity: 59
Merit: 10
Discovered Quatloo and I like the idea.  Is there still development going on?
legendary
Activity: 994
Merit: 1000
that is nice, Anybody already ran this piece of software on linux ??

thanks for clues

You can try running it in wine and let us know how it goes.
newbie
Activity: 40
Merit: 0
that is nice, Anybody already ran this piece of software on linux ??

thanks for clues
legendary
Activity: 1456
Merit: 1000
i hope new version come out soon, i dont mind buy another 3000qtl if the program work. 
legendary
Activity: 1848
Merit: 1018
If  you lose internet connection for more than a minute or so it does that. Just close and restart it.
That being said, there are bugs and we are waiting for Markus to fix arb and release new version.
Pages:
Jump to: