[ANN] Bittrex / Poloniex / Cryptsy All Coin Trading Software, Quatloo Trader. - page 46.

rdyoung

legendary

Activity: 994

Merit: 1000

Quote from: MrDumper on May 03, 2015, 01:07:42 PM

Got a problem...

If I leave the app running for a few hours, eventually it stops the trades because it thinks that I don't have enough QTL:

But I do have them on BitTrex:

If I restart the app, it will work again for a few hours. But that's unreliable! Is that a known issue, can this be fixed?

And when I restart the app, it forgets some of my Ping Pong settings, so I have to enter them again :-(

Thanks!

How steady is your internet connection? I get this issue a lot as well. Hopefully he is working on another way to prove our holdings so this doesn't happen.

rdyoung

legendary

Activity: 994

Merit: 1000

Quote from: MrDumper on May 03, 2015, 01:16:19 PM

Quote from: rdyoung on May 03, 2015, 09:52:29 AM

Quote from: MrDumper on May 02, 2015, 08:56:20 PM

Hi!

I am new here and just installed your app yesterday for the 1st time. I must say it is super awesome! Works flawless and is rather simple to use (once you get past the feeling of "so many buttons and controls, how do I use it?").

So four questions from the noob...
1. Can it do "ping pong" on multiple pairs or just one? Every time I switch the coin pair, the current auto settings dont change. If cant do in one app, can I run multiple instances of the bot on same computer?
2. What is scalp mode? When do I need it on and when off?
3. What are advanced arbitrage features? Can you post a screenshot? When are they needed? I dont mind getting more qtl to enable them, but I want to know what I am buying first.
4. Is it possible to "pump" a coin with your bot? Lets say I have 1 BTC and 100000 shitcoins which price is 100 satoshi. Can I press a button and start the upward buying trend on this coin. Buying from myself every time higher and higher? Also create volume on bittrex to save the coin from delisting.

Thanks

I am most definitely not the dev but I have enough experience trading to answer your questions to a point.

Pingpong, it doesn't appear that you can pingpong on multiple pairs on one exchange at a time. And yes, you can run the bot more than once, but be careful with the api calls on the exchanges, bittrex is now at 1s/call, polo is at 3calls/second, and cryptsy I have no clue, I never received a response to my inquiry when I was investigating why the bot went funky.

Scalping is a time "honored" technique of taking a very small profit from the market, IE, buying @ 0.01 and selling at 0.010001, so long as you cover your tx fees and make a small profit.
Arbitrage is taking advantage of the price differences between markets, if you can buy xyz from polo @0.01 and sell at cryptsy for 0.011, thats an arbitrage. The advanced arb features are only needed if you want to arbitrage, you don't need to unlock them if your going to use the HFT functions.

Pumping a coin? Most exchanges if not all are setup to not allow you to trade with yourself. If your looking to pump a coin, you will need to learn how the pump and dump works and how to orchestrate one. This is not the place for to discuss that.

Thank you for your reply.

PS: I don't want to "pump and dump". I want to "pump" only: lose some of my own BTC, but raise the price of a coin and save it from delisting.

Your wanting to Pump only, but what happens when you stop pumping? It crashes and eventually gets delisted. You would be better off in the long term by raising adoption and recognition of the coin you want to save.

If you believe in the coin longterm and are willing to risk some coin, you could setup some buy walls and start accumulating that coin.

If you just want to push the volume of the coin, setup 2 bots running on 2 different accounts/apis and use them to pingpong the coin, you will be buying and selling from yourself but it will increase the volume. Do me a favor and tell me what coin so I can get my bots on it as well.

MrDumper

newbie

Activity: 11

Merit: 0

Quote from: rdyoung on May 03, 2015, 09:52:29 AM

Quote from: MrDumper on May 02, 2015, 08:56:20 PM

Hi!

I am new here and just installed your app yesterday for the 1st time. I must say it is super awesome! Works flawless and is rather simple to use (once you get past the feeling of "so many buttons and controls, how do I use it?").

So four questions from the noob...
1. Can it do "ping pong" on multiple pairs or just one? Every time I switch the coin pair, the current auto settings dont change. If cant do in one app, can I run multiple instances of the bot on same computer?
2. What is scalp mode? When do I need it on and when off?
3. What are advanced arbitrage features? Can you post a screenshot? When are they needed? I dont mind getting more qtl to enable them, but I want to know what I am buying first.
4. Is it possible to "pump" a coin with your bot? Lets say I have 1 BTC and 100000 shitcoins which price is 100 satoshi. Can I press a button and start the upward buying trend on this coin. Buying from myself every time higher and higher? Also create volume on bittrex to save the coin from delisting.

Thanks

I am most definitely not the dev but I have enough experience trading to answer your questions to a point.

Pingpong, it doesn't appear that you can pingpong on multiple pairs on one exchange at a time. And yes, you can run the bot more than once, but be careful with the api calls on the exchanges, bittrex is now at 1s/call, polo is at 3calls/second, and cryptsy I have no clue, I never received a response to my inquiry when I was investigating why the bot went funky.

Scalping is a time "honored" technique of taking a very small profit from the market, IE, buying @ 0.01 and selling at 0.010001, so long as you cover your tx fees and make a small profit.
Arbitrage is taking advantage of the price differences between markets, if you can buy xyz from polo @0.01 and sell at cryptsy for 0.011, thats an arbitrage. The advanced arb features are only needed if you want to arbitrage, you don't need to unlock them if your going to use the HFT functions.

Pumping a coin? Most exchanges if not all are setup to not allow you to trade with yourself. If your looking to pump a coin, you will need to learn how the pump and dump works and how to orchestrate one. This is not the place for to discuss that.

Thank you for your reply.

PS: I don't want to "pump and dump". I want to "pump" only: lose some of my own BTC, but raise the price of a coin and save it from delisting.

MrDumper

newbie

Activity: 11

Merit: 0

Got a problem...

If I leave the app running for a few hours, eventually it stops the trades because it thinks that I don't have enough QTL:

https://i.imgur.com/CnfwntT.png

But I do have them on BitTrex:

https://i.imgur.com/C7MZuxL.png

If I restart the app, it will work again for a few hours. But that's unreliable! Is that a known issue, can this be fixed?

And when I restart the app, it forgets some of my Ping Pong settings, so I have to enter them again :-(

Thanks!

rdyoung

legendary

Activity: 994

Merit: 1000

Quote from: MrDumper on May 02, 2015, 08:56:20 PM

Hi!

I am new here and just installed your app yesterday for the 1st time. I must say it is super awesome! Works flawless and is rather simple to use (once you get past the feeling of "so many buttons and controls, how do I use it?").

So four questions from the noob...
1. Can it do "ping pong" on multiple pairs or just one? Every time I switch the coin pair, the current auto settings dont change. If cant do in one app, can I run multiple instances of the bot on same computer?
2. What is scalp mode? When do I need it on and when off?
3. What are advanced arbitrage features? Can you post a screenshot? When are they needed? I dont mind getting more qtl to enable them, but I want to know what I am buying first.
4. Is it possible to "pump" a coin with your bot? Lets say I have 1 BTC and 100000 shitcoins which price is 100 satoshi. Can I press a button and start the upward buying trend on this coin. Buying from myself every time higher and higher? Also create volume on bittrex to save the coin from delisting.

Thanks

I am most definitely not the dev but I have enough experience trading to answer your questions to a point.

Pingpong, it doesn't appear that you can pingpong on multiple pairs on one exchange at a time. And yes, you can run the bot more than once, but be careful with the api calls on the exchanges, bittrex is now at 1s/call, polo is at 3calls/second, and cryptsy I have no clue, I never received a response to my inquiry when I was investigating why the bot went funky.

Scalping is a time "honored" technique of taking a very small profit from the market, IE, buying @ 0.01 and selling at 0.010001, so long as you cover your tx fees and make a small profit.
Arbitrage is taking advantage of the price differences between markets, if you can buy xyz from polo @0.01 and sell at cryptsy for 0.011, thats an arbitrage. The advanced arb features are only needed if you want to arbitrage, you don't need to unlock them if your going to use the HFT functions.

Pumping a coin? Most exchanges if not all are setup to not allow you to trade with yourself. If your looking to pump a coin, you will need to learn how the pump and dump works and how to orchestrate one. This is not the place for to discuss that.

MrDumper

newbie

Activity: 11

Merit: 0

Hi!

I am new here and just installed your app yesterday for the 1st time. I must say it is super awesome! Works flawless and is rather simple to use (once you get past the feeling of "so many buttons and controls, how do I use it?").

So four questions from the noob...
1. Can it do "ping pong" on multiple pairs or just one? Every time I switch the coin pair, the current auto settings dont change. If cant do in one app, can I run multiple instances of the bot on same computer?
2. What is scalp mode? When do I need it on and when off?
3. What are advanced arbitrage features? Can you post a screenshot? When are they needed? I dont mind getting more qtl to enable them, but I want to know what I am buying first.
4. Is it possible to "pump" a coin with your bot? Lets say I have 1 BTC and 100000 shitcoins which price is 100 satoshi. Can I press a button and start the upward buying trend on this coin. Buying from myself every time higher and higher? Also create volume on bittrex to save the coin from delisting.

Thanks

MarKusRomanus

legendary

Activity: 910

Merit: 1000

I just started getting into the updates. I'm shooting for an update release by next weekend. Things are going well.

Razerglass

legendary

Activity: 1036

Merit: 1000

https://bmy.guide

Quote from: MarKusRomanus on January 20, 2015, 01:12:34 AM

Hey everyone, I'm still here. I've been getting requests for additions of other exchanges and additional auto trading functions. I've been busy with a couple of other projects, but look forward to finishing updates for the Quatloo Trader. That will be within 2 weeks. The other new thing I wanted to throw out there is the idea of updating the Quatloos wallet and core code to change the first halving event. ( when the mining block reward goes from 17.01 to 8.505). Its not settled yet , but this may happen within a month and will change the first halving to occur in April or sooner. I'll make a decision within a month and I welcome proposals on how to proceed.

Quote from: Razerglass on May 01, 2015, 02:02:14 PM

finally im done 12hr shift every day.. now 8hrs and wekends off.. so the work begins tomorrow full swing with quatlootrader

Quote from: MarKusRomanus on April 07, 2015, 08:08:53 PM

Hi everyone, I'm popping in to give an update on how things are going.. I know its been a while. The job site I've been at since Feb 6th just keeps having additional problems with multiple units. when we finish one major job... another unit goes down. I've been working mostly 12hr days since the start with not much time at all for my software projects. I was sure we were going to finally be only working 8hr days a few times but it didn't last very long. a few 8hr days then ..boom! back on 12 hr shifts. I'm again working 12hr days and it looks like for at least another week. SO.. Just understand that I'm not gone and I'm not going to stop working on the the Quatloo cryptocurrency or the Quatloo trader. A new wave of updates will be still 3 weeks away. C-Cex exchange work did start weeks ago when I had a week of 8hr days. The trader , for the most part is still working pretty well, I still use it a lot. Stay tuned and I will keep you all in the loop!

Its late and I didn't get a chance to read all the new posts in this thread.

Quote from: MarKusRomanus on April 21, 2015, 08:43:22 PM

Hey everyone.. some good news... I'll finally have time to resume coding by the end of this week and should be able to get back on track with my ideas for Quatloo and the Quatloo Trader software . I'm going back on regular 40 hr weeks at my job and will have much more free time again. One thing I wanted to address was the change I proposed for Quatloo to halve before the 2 year mark. I had said I was shooting for the halving to happen in April.. The new target time is early or mid May. More to come on this matter...

so you prolly got stuck with 12 hours shifts again, maybe next week?

rdyoung

legendary

Activity: 994

Merit: 1000

Quote from: WaxFruit on April 24, 2015, 02:49:35 PM

It doesn't crash, just pops up that error. Wasn't sure if it was still functional or not though. I wasn't getting the error up until I installed patches and rebooted on the 15th. I tried rolling them back last weekend but that didn't work either. Could be a coincidence with the API change. On this Wednesday I patched everything back to the latest again and still get the popup. I just hit continue for now and will monitor.

I had the same issues starting about the same time. There is no coincidence, it is definitely the changes made by bittrex to the api. When I emailed them they told me I or it was set to 10s/call, they then changed it to 1s/call which is still insane, poloniex for example allows 180 calls/minute.
I spent 2 days trying to figure out what was going on and it is most definitely a combination of how the bot handles issues with an api and the changes that bittrex made.

WaxFruit

newbie

Activity: 2

Merit: 0

It doesn't crash, just pops up that error. Wasn't sure if it was still functional or not though. I wasn't getting the error up until I installed patches and rebooted on the 15th. I tried rolling them back last weekend but that didn't work either. Could be a coincidence with the API change. On this Wednesday I patched everything back to the latest again and still get the popup. I just hit continue for now and will monitor.

rdyoung

legendary

Activity: 994

Merit: 1000

rdyoung

legendary

Activity: 994

Merit: 1000

Quote from: Opnsrc on April 24, 2015, 09:15:54 AM

Quote from: jimlite on April 23, 2015, 06:14:35 PM

Bittrex has changed their api a few times lately, and strangely the current version of QTL trader is working fine
and the test version isn't. So that is good news, but MarKus will be on top of it to change anything
if Bittrex stops working again. And of course there will be updates in the future.

A developers worst fear, when a technical issue fixes itself.

The Apps auto functions are indeed working again, Bittrex seems to have original placed a limit to 1 API signal per 10 seconds(something among those lines). It seems to have now changed to 1 signal every 1 second, Limiting me only from spam clicking the refresh button, looks okay for now.

Some of the functions work, but the list of coin balances in the arb windows stays zeroed for the most part for bittrex.

AdamWhite

hero member

Activity: 605

Merit: 500

Good to hear it's working for some but it's still crashing here. Was working fine before all this started. Can you release the test version on the off chance that works for the rest of us Huh

Opnsrc

hero member

Activity: 1064

Merit: 500

WaxFruit

newbie

Activity: 2

Merit: 0

Let me start by saying thank you, this bot has been great. However I have been having issues lately. Whenever I try to run arb I have been getting the crash below. I am running windows 8.1 pro x64, fully up to date.

Code:

See the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
   at (Object )
   at QuatlooTrader2.PageContext.FindMenu(Object rootData)
   at QuatlooTrader2.PluginSettings.DirectorySet.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.AsyncMethodBuilderCore.b__4(Object state)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
QuatlooTrader2
    Assembly Version: 2.3.1.8
    Win32 Version: 2.3.1.8
    CodeBase: file[Suspicious link removed]
----------------------------------------
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34239 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
QuatlooTrader2&
    Assembly Version: 1.0.0.0
    Win32 Version: 2.3.1.8
    CodeBase: file[Suspicious link removed]
----------------------------------------
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
Microsoft.GeneratedCode
    Assembly Version: 1.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Newtonsoft.Json
    Assembly Version: 6.0.0.0
    Win32 Version: 6.0.3.17227
    CodeBase: file:///D:/Main/Cryptos/Quatloo-Trader2.3/Newtonsoft.Json.DLL
----------------------------------------
System.Net.Http
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Net.Http/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Net.Http.dll
----------------------------------------
System.Web
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34248 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
----------------------------------------
Microsoft.GeneratedCode
    Assembly Version: 1.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Numerics
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
----------------------------------------
System.ComponentModel.DataAnnotations
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.33440
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ComponentModel.DataAnnotations/v4.0_4.0.0.0__31bf3856ad364e35/System.ComponentModel.DataAnnotations.dll
----------------------------------------
System.Runtime.Serialization
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Serialization/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Serialization.dll
----------------------------------------
System.Xml.Linq
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml.Linq/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.Linq.dll
----------------------------------------
System.Data
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:


    


When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Opnsrc

hero member

Activity: 1064

Merit: 500

Quote from: jimlite on April 23, 2015, 06:14:35 PM

Bittrex has changed their api a few times lately, and strangely the current version of QTL trader is working fine
and the test version isn't. So that is good news, but MarKus will be on top of it to change anything
if Bittrex stops working again. And of course there will be updates in the future.

A developers worst fear, when a technical issue fixes itself.

The Apps auto functions are indeed working again, Bittrex seems to have original placed a limit to 1 API signal per 10 seconds(something among those lines). It seems to have now changed to 1 signal every 1 second, Limiting me only from spam clicking the refresh button, looks okay for now.

jimlite

legendary

Activity: 1848

Merit: 1018

Bittrex has changed their api a few times lately, and strangely the current version of QTL trader is working fine
and the test version isn't. So that is good news, but MarKus will be on top of it to change anything
if Bittrex stops working again. And of course there will be updates in the future.

rdyoung

legendary

Activity: 994

Merit: 1000

Quote from: Razerglass on April 22, 2015, 11:57:14 PM

Quote from: rdyoung on April 22, 2015, 10:10:23 PM

Quote from: lothendriel on April 22, 2015, 05:39:37 PM

Quote from: jimlite on April 21, 2015, 09:25:40 PM

Markus and I are testing fixes to bittrex's new api. We hope to have an update out soon.

You guys are awesome! Any time I make enough using it you will be getting some BTC for sure. Love the features and it's really powerful. You all did a helluva job!

Kudos and thank you so much!

I second this. Keep up the good work. Maybe we can find a way to make this your full time job

just go work markus's fulltime job so he can come finish qtlT :p

Yeah, been there done that, no thank you

I was speaking seriously, I am running a colored coin/open asset that is backed by arbitrage trading. I have not done any hard math but I would have no problem giving them 1% of my overall profits for their support maintaining the bot. This is one of those situations that if enough of us pledged enough capital we could likely help make the bot a fulltime job

Razerglass

legendary

Activity: 1036

Merit: 1000

https://bmy.guide

Quote from: rdyoung on April 22, 2015, 10:10:23 PM

Quote from: lothendriel on April 22, 2015, 05:39:37 PM

Quote from: jimlite on April 21, 2015, 09:25:40 PM

Markus and I are testing fixes to bittrex's new api. We hope to have an update out soon.

You guys are awesome! Any time I make enough using it you will be getting some BTC for sure. Love the features and it's really powerful. You all did a helluva job!

Kudos and thank you so much!

I second this. Keep up the good work. Maybe we can find a way to make this your full time job

just go work markus's fulltime job so he can come finish qtlT :p

rdyoung

legendary

Activity: 994

Merit: 1000

Quote from: lothendriel on April 22, 2015, 05:39:37 PM

Quote from: jimlite on April 21, 2015, 09:25:40 PM

Markus and I are testing fixes to bittrex's new api. We hope to have an update out soon.

You guys are awesome! Any time I make enough using it you will be getting some BTC for sure. Love the features and it's really powerful. You all did a helluva job!

Kudos and thank you so much!

I second this. Keep up the good work. Maybe we can find a way to make this your full time job

Topic: [ANN] Bittrex / Poloniex / Cryptsy All Coin Trading Software, Quatloo Trader. - page 46. (Read 236646 times)