cryptopia.. no nodes found for over 24 hours:
Because the wallet offline! When they finish the status will be online then you could see the nodes!
Topic: [ANN] Cachecoin |CACH| POW+POS | NO PREMINE | NO ICO | CRYPTOPIA | - page 27. (Read 81319 times)
June 30, 2017, 08:59:22 AM
cryptopia.. no nodes found for over 24 hours:
Because the wallet offline! When they finish the status will be online then you could see the nodes!
June 30, 2017, 08:39:36 AM
Its about 90h/s on gtx1070 on pl70%.
What is the power consuption?
June 30, 2017, 08:36:03 AM
cryptopia.. no nodes found for over 24 hours:
Its about 90h/s on gtx1070 on pl70%.
sounds good, this is the range of these Cards. June 30, 2017, 08:27:14 AM
Its about 90h/s on gtx1070 on pl70%.
June 30, 2017, 08:19:30 AM
cryptopia.. no nodes found for over 24 hours:
June 30, 2017, 04:47:05 AM
I remember trying yesterday with my rx480 8gb (slighlty underclocked) and i got 30 H/s
June 30, 2017, 04:41:07 AM
not ok because unrealistic 
pls post your config for all these Cards. yes we have scrypt-jane: 18 you can also post a screenshot
pls post your config for all these Cards. yes we have scrypt-jane: 18 you can also post a screenshot June 30, 2017, 04:28:28 AM
The theoretically largest possible is your memory size divided by the thread size (Nf18 = 64MB) R7 240 4GB -> 64H / s -> but real only 29H/s-32H/s (it's a slow card) and you can't allocated all memory! Maybe use 70% for fast cards, I don't know. 8GB/64MB*0.7= ~ 89H/s ...
for the Ikarus pool use the --no-extranonce Option if you can, the pool do not Support extranonce!
for the Ikarus pool use the --no-extranonce Option if you can, the pool do not Support extranonce!
Thanks for the answers, my doubt is for the following
According to the law in the previous cachecoin thread, the following cards had this hashrate with the modified cgminer version for scrypt-jane
[ANN] [CACH] CACHeCoin released based on scrypt-jane
<< <(196/520)> >>
Guys, can you tell me if my hashrates are OK? I'm using cgminer that supports scrypt-jane algorithm. I've read somewhere on the internet, that scrypt-jane hashrate should be something like 75% of scrypt hashrate. In my case, it is not
I'm not getting any HW errors at all.Radeon 7970
265 kH / s (WU: 220 kH / s) - scrypt-jane
760 kH / s (WU: 690 kH / s) - scrypt
Radeon 270x
186 kH / s (WU: 195 kH / s) - scrypt-jane
465 kH / s (WU: 410 kH / s) - scrypt
Currently mining at 590kh / s and 635kh / s on my two R9 280X.
But that was in the past I do not know if those cards still maintain that hashrate if the code changes, I imagine it is the same, because in the old thread says scrypt-jane: 18
Finally, according to tests gtx 1080 gets 520 h / s
Has anyone corroborated these cards?
June 30, 2017, 12:54:54 AM
The theoretically largest possible is your memory size divided by the thread size (Nf18 = 64MB) R7 240 4GB -> 64H / s -> but real only 29H/s-32H/s (it's a slow card) and you can't allocated all memory! Maybe use 70% for fast cards, I don't know. 8GB/64MB*0.7= ~ 89H/s ...
for the Ikarus pool use the --no-extranonce Option if you can, the pool do not Support extranonce!
for the Ikarus pool use the --no-extranonce Option if you can, the pool do not Support extranonce!
June 29, 2017, 08:44:31 PM
I tried the amd miner on a r9 390,it just crashes without a reason.I also tried with stock settings,driver crash anyway,also tried with higher voltage,same problem.
I believe that miner won't work on windows 10/8.1.
yes, Windows 7 and a older catalyst Version helps, but I don't know what it was. your address was Cfa3AM9Pots8sqtXWUwC83mNWKESk4foAf? I believe that miner won't work on windows 10/8.1.
use a cpu miner!But if someone need help for a gpu miner you can contact me (prefer in german)
Hello I have 3 gpu amd r7 260x of 1GB ram, I also happen the same with the miner for amd the controller is blocked? With what solution can you help me?
Thank you. Do you say that an old driver should be installed? Which version should be installed?
My operating system is windows 7
I would greatly appreciate your help
What performance in hashrate would have a rx 480 of 4GB?
And what would be the hashrate for the gtx 1060 and gtx 1070?
June 29, 2017, 02:23:25 PM
POS is 10% annual
June 29, 2017, 02:13:53 PM
I hope this project is successful
June 29, 2017, 02:00:34 PM
is it still a pos coin? i searched here and also the website and no one mentioned what is the the yearly interest rate.
June 29, 2017, 12:57:51 PM
I tried the amd miner on a r9 390,it just crashes without a reason.I also tried with stock settings,driver crash anyway,also tried with higher voltage,same problem.
I believe that miner won't work on windows 10/8.1.
yes, Windows 7 and a older catalyst Version helps, but I don't know what it was. your address was Cfa3AM9Pots8sqtXWUwC83mNWKESk4foAf? I believe that miner won't work on windows 10/8.1.
use a cpu miner!But if someone need help for a gpu miner you can contact me (prefer in german)
Hello I have 3 gpu amd r7 260x of 1GB ram, I also happen the same with the miner for amd the controller is blocked? With what solution can you help me?
Thank you. Do you say that an old driver should be installed? Which version should be installed?
My operating system is windows 7
I would greatly appreciate your help
What performance in hashrate would have a rx 480 of 4GB?
June 29, 2017, 12:54:03 PM
I tried the amd miner on a r9 390,it just crashes without a reason.I also tried with stock settings,driver crash anyway,also tried with higher voltage,same problem.
I believe that miner won't work on windows 10/8.1.
yes, Windows 7 and a older catalyst Version helps, but I don't know what it was. your address was Cfa3AM9Pots8sqtXWUwC83mNWKESk4foAf? I believe that miner won't work on windows 10/8.1.
use a cpu miner!But if someone need help for a gpu miner you can contact me (prefer in german)
Hello I have 3 gpu amd r7 260x of 1GB ram, I also happen the same with the miner for amd the controller is blocked? With what solution can you help me?
Thank you. Do you say that an old driver should be installed? Which version should be installed?
My operating system is windows 7
I would greatly appreciate your help
What performance in hashrate would have a rx 480 of 4GB Or a gtx 1060 of 3 gb??
June 29, 2017, 11:31:52 AM
I tried the amd miner on a r9 390,it just crashes without a reason.I also tried with stock settings,driver crash anyway,also tried with higher voltage,same problem.
I believe that miner won't work on windows 10/8.1.
yes, Windows 7 and a older catalyst Version helps, but I don't know what it was. your address was Cfa3AM9Pots8sqtXWUwC83mNWKESk4foAf? I believe that miner won't work on windows 10/8.1.
use a cpu miner!But if someone need help for a gpu miner you can contact me (prefer in german)
Hello I have 3 gpu amd r7 260x of 1GB ram, I also happen the same with the miner for amd the controller is blocked? With what solution can you help me?
Thank you. Do you say that an old driver should be installed? Which version should be installed?
My operating system is windows 7
I would greatly appreciate your help
June 29, 2017, 11:22:49 AM
I tried the amd miner on a r9 390,it just crashes without a reason.I also tried with stock settings,driver crash anyway,also tried with higher voltage,same problem.
I believe that miner won't work on windows 10/8.1.
yes, Windows 7 and a older catalyst Version helps, but I don't know what it was. your address was Cfa3AM9Pots8sqtXWUwC83mNWKESk4foAf? I believe that miner won't work on windows 10/8.1.
use a cpu miner!But if someone need help for a gpu miner you can contact me (prefer in german)
Hello I have 3 gpu amd r7 260x of 1GB ram, I also happen the same with the miner for amd the controller is blocked? With what solution can you help me?
Thank you. Do you say that an old driver should be installed? Which version should be installed?
My operating system is windows 7
I would greatly appreciate your help
June 29, 2017, 09:09:27 AM
I tried the amd miner on a r9 390,it just crashes without a reason.I also tried with stock settings,driver crash anyway,also tried with higher voltage,same problem.
I believe that miner won't work on windows 10/8.1.
yes, Windows 7 and a older catalyst Version helps, but I don't know what it was. your address was Cfa3AM9Pots8sqtXWUwC83mNWKESk4foAf? I believe that miner won't work on windows 10/8.1.
use a cpu miner!But if someone need help for a gpu miner you can contact me (prefer in german)
June 29, 2017, 08:57:08 AM
I tried the amd miner on a r9 390,it just crashes without a reason.I also tried with stock settings,driver crash anyway,also tried with higher voltage,same problem.
I believe that miner won't work on windows 10/8.1.
I believe that miner won't work on windows 10/8.1.
June 29, 2017, 02:31:10 AM
guess I should have been more clear,
Can someone please post a link to a windows GPU miner that YOU are using to mine at the current cachecoin pool.
and also, if you dont mind, the config settings. I am getting HW errors from my miner, even at low settings.
JIm
https://github.com/tpruvot/ccminer/releases
-a scrypt-jane:18 -o stratum+tcp://ikarus.ageleis.de:3003 -u you_wallet -p any
See this for GPU miner
Jump to: