[ANN] California Coin | SwissCex + C-CEX | California Coin Up 737.25 % This Week - page 208.

MikeGAZ83

full member

Activity: 196

Merit: 100

I thought there exists some type of services/companies that will setup pools for a good deal am I mistaken? I'd be down to purchase a pool for California Coin when I get paid.

t-minus

full member

Activity: 210

Merit: 100

Quote from: AllisionMarieLewis on May 01, 2014, 04:59:57 AM

Quote from: t-minus on May 01, 2014, 03:13:54 AM

ive tried a couple times :/ also tried chmod a few times here and there and restarted, nothing yet.... im kinda stumped

My friend is a guru @ linux stuff I'll see if he has some free time to help us out.

Thanks, I just watched a good video on the subject and im pretty sure I did everything he did. I think I need to check my config file again.

AllisionMarieLewis

sr. member

Activity: 518

Merit: 252

Quote from: t-minus on May 01, 2014, 03:13:54 AM

ive tried a couple times :/ also tried chmod a few times here and there and restarted, nothing yet.... im kinda stumped

My friend is a guru @ linux stuff I'll see if he has some free time to help us out.

CaliforniaCoinCAC

full member

Activity: 126

Merit: 100

Quote from: t-minus on May 01, 2014, 03:13:54 AM

ive tried a couple times :/ also tried chmod a few times here and there and restarted, nothing yet.... im kinda stumped

I wish I could help but I'm mostly a Windows guy. Hope someone chime's in for ya!

t-minus

full member

Activity: 210

Merit: 100

ive tried a couple times :/ also tried chmod a few times here and there and restarted, nothing yet.... im kinda stumped

MikeGAZ83

full member

Activity: 196

Merit: 100

Quote from: t-minus on May 01, 2014, 02:54:33 AM

hey I got a question for any linux guys out there. Im trying to get the cali coin wallet going on linux from source, I got the daemon running but when I run "./litecoind getinfo" im not getting any blocks... any ideas why its not connecting? im not getting any errors that I can see right now...

Could be a glitch try resetting everything

t-minus

full member

Activity: 210

Merit: 100

hey I got a question for any linux guys out there. Im trying to get the cali coin wallet going on linux from source, I got the daemon running but when I run "./litecoind getinfo" im not getting any blocks... any ideas why its not connecting? im not getting any errors that I can see right now...

CaliforniaCoinCAC

full member

Activity: 126

Merit: 100

Quote from: MikeGAZ83 on May 01, 2014, 02:15:43 AM

Quote from: AllisionMarieLewis on May 01, 2014, 01:59:06 AM

Getting harder to solo mine even with good equipment... Need that pool

Indeed a pool would be great can't believe no pool owner has started a pool yet don't they realize they can take fee's 1% - 2%

so sad when there is a pool for bluecoin and yellowcoin and those are all clones too but what is neat about CaliforniaCoin is it's not a color & the people are very advanced when it comes to technology & new stuff. Could go very far if we continue at this pace people. Community brings success to coins and I think this one is on to something just my 2 cents.

This will turn out to be a lot bigger than Yellowcoin so I'm sure pool owners will start operating CaliforniaCoin pools shortly!

MikeGAZ83

full member

Activity: 196

Merit: 100

Quote from: AllisionMarieLewis on May 01, 2014, 01:59:06 AM

Getting harder to solo mine even with good equipment... Need that pool

Indeed a pool would be great can't believe no pool owner has started a pool yet don't they realize they can take fee's 1% - 2%

so sad when there is a pool for bluecoin and yellowcoin and those are all clones too but what is neat about CaliforniaCoin is it's not a color & the people are very advanced when it comes to technology & new stuff. Could go very far if we continue at this pace people. Community brings success to coins and I think this one is on to something just my 2 cents.

CaliforniaCoinCAC

full member

Activity: 126

Merit: 100

Quote from: AllisionMarieLewis on May 01, 2014, 01:59:06 AM

Getting harder to solo mine even with good equipment... Need that pool

Coming very soon please be patient

AllisionMarieLewis

sr. member

Activity: 518

Merit: 252

Getting harder to solo mine even with good equipment... Need that pool

CaliforniaCoinCAC

full member

Activity: 126

Merit: 100

We Need More Members On The DEV Team!

Add: TheCaliforniaCoin On Skype To Join Our Chat Group!

Everyone's Welcome! Newbies & Veterans!

AllisionMarieLewis

sr. member

Activity: 518

Merit: 252

Quote from: jgaspar on May 01, 2014, 01:17:13 AM

Quote from: AllisionMarieLewis on May 01, 2014, 12:50:45 AM

Thanks

I'll try your settings, out of curiousity why is the thread concurrency so low on yours?

I heard many 7950 should run at least 20500 for that setting but as you said I realize that every card is a little different & at the moment my card is stock just turned up the fans with GPU-Tweak

That's the value that gives me the best hashrate, my card is a sapphire with 3Gb, and it crashes with --thread-concurrency 24000, BUT my card is UNDERCLOCKED.

You can also skip --thread-concurrency, as long as you have --shaders 1792, CGminer will calculate what it thinks is the best value for thread concurrency.

Is your card on a dedicated mining rig, or in a everyday PC like mine? If i use -I 20, I will get the highest hashrate but my PC gets unusable.

Using xintensity instead of intensity allows me to have a perfectly usable PC, while hashing at 610 KH/s, however not all CGMiner versions allow it, I STRONGLY recommend that you use xintensity, unless its a dedicated mining rig.

Mines a dedicated mining rig.

Try

Code:

--thread-concurrency 23,000

that's giving me good results so far 663 KH/S and no crashes yet knock on wood hope this stays this way. Can barely move the mouse but no biggie

Temps not too bad eithor. Gonna be rocking this for a while. CaliforniaCoins to the moon

jgaspar

member

Activity: 239

Merit: 10

Quote from: AllisionMarieLewis on May 01, 2014, 12:50:45 AM

Thanks

I'll try your settings, out of curiousity why is the thread concurrency so low on yours?

I heard many 7950 should run at least 20500 for that setting but as you said I realize that every card is a little different & at the moment my card is stock just turned up the fans with GPU-Tweak

That's the value that gives me the best hashrate, my card is a sapphire with 3Gb, and it crashes with --thread-concurrency 24000, BUT my card is UNDERCLOCKED.

You can also skip --thread-concurrency, as long as you have --shaders 1792, CGminer will calculate what it thinks is the best value for thread concurrency.

Is your card on a dedicated mining rig, or in a everyday PC like mine? If i use -I 20, I will get the highest hashrate but my PC gets unusable.

Using xintensity instead of intensity allows me to have a perfectly usable PC, while hashing at 610 KH/s, however not all CGMiner versions allow it, I STRONGLY recommend that you use xintensity, unless its a dedicated mining rig.

If you feel like reading something, this guide is probably the best around.
http://www.overclock.net/t/1461916/tutorial-ultimate-guide-to-tweaking-amd-cgminer-3-7-2-kalroth-edition-sgminer-instructions-included-aswell-get-the-most-hash-out-of-your-gpu

CaliforniaCoinCAC

full member

Activity: 126

Merit: 100

Add: TheCaliforniaCoin On Skype To Join Our Chat Group!

ea$ySTRe3T

full member

Activity: 154

Merit: 100

Quote from: AllisionMarieLewis on May 01, 2014, 12:50:45 AM

Quote from: MikeGAZ83 on May 01, 2014, 12:21:47 AM

Quote from: AllisionMarieLewis on May 01, 2014, 12:05:31 AM

Hi

Does anyone have some good settings they can share for the 7950 video card, for CGMiner. I'm using getting 576kh/s but I read that my card should be getting a lot more

If I set my intensity to high it crashes right away Huh

Try this:

Code:

-I 19 --thread-concurrency 24000 --gpu-powertune 20

From:

https://litecoin.info/Mining_Hardware_Comparison

That should get you around ~ 670 kh/s make sure your GPU fans are at 85% at least or else you will burn out the GPU over time & watch the temps Don't go over 80C they can go higher but you want your card to last right Wink

Thanks ill try that

Quote from: jgaspar on May 01, 2014, 12:42:00 AM

Quote from: AllisionMarieLewis on May 01, 2014, 12:05:31 AM

Hi

Does anyone have some good settings they can share for the 7950 video card, for CGMiner. I'm using getting 576kh/s but I read that my card should be getting a lot more

If I set my intensity to high it crashes right away Huh

Not a lot more... a little more Grin

some 7950 will do 670 Kh/s heavily overclocked, but i won't recommend it, temps and consumption are much higher, overall i don´t think its worth it.

I usually do 600-610 KH/s with temps around 70-72C, these are my settings using CGminer 3.7.2 kalroth

--xintensity 4 --worksize 256 -g 2 --shaders 1792 --gpu-engine 995 --gpu-memclock 1250 --gpu-powertune 10 --thread-concurrency 16384

You can try to increase --thread-concurrency , every card is a little bit different.

I´m using a modified bios with core voltage @ 1,081 V instead of stock 1,25 V, for lower wattage.

If you are using stock vcore voltage you can try to increase --gpu-engine in 5Mhz steps until drivers crash, then go back 10Mhz.

Thanks

I'll try your settings, out of curiousity why is the thread concurrency so low on yours?

I heard many 7950 should run at least 20500 for that setting but as you said I realize that every card is a little different & at the moment my card is stock just turned up the fans with GPU-Tweak

The more stream processors & GB of memory your card has the higher your thread concurrency can go, you should do at least 23,000 with that video card.

I've seen many people reporting good kh/s with those settings and intensity @ 20 with fans @ 100% and good case ventilation will ensure your video card lasts many years not just a few months.

If you have poor case ventilation you could take off the side of it and that helps let the hot air get out. Or get a small desk fan to blow on it. Also get those little cans of compressed air and do it on your video card every 2 months you'll be surprised haha they can collect a lot of dust especially if you smoke blunts all day long like I do lol

AllisionMarieLewis

sr. member

Activity: 518

Merit: 252

Quote from: MikeGAZ83 on May 01, 2014, 12:21:47 AM

Quote from: AllisionMarieLewis on May 01, 2014, 12:05:31 AM

Hi

Does anyone have some good settings they can share for the 7950 video card, for CGMiner. I'm using getting 576kh/s but I read that my card should be getting a lot more

If I set my intensity to high it crashes right away Huh

Try this:

Code:

-I 19 --thread-concurrency 24000 --gpu-powertune 20

From:

https://litecoin.info/Mining_Hardware_Comparison

That should get you around ~ 670 kh/s make sure your GPU fans are at 85% at least or else you will burn out the GPU over time & watch the temps Don't go over 80C they can go higher but you want your card to last right Wink

Thanks ill try that

Quote from: jgaspar on May 01, 2014, 12:42:00 AM

Quote from: AllisionMarieLewis on May 01, 2014, 12:05:31 AM

Hi

Does anyone have some good settings they can share for the 7950 video card, for CGMiner. I'm using getting 576kh/s but I read that my card should be getting a lot more

If I set my intensity to high it crashes right away Huh

Not a lot more... a little more Grin

some 7950 will do 670 Kh/s heavily overclocked, but i won't recommend it, temps and consumption are much higher, overall i don´t think its worth it.

I usually do 600-610 KH/s with temps around 70-72C, these are my settings using CGminer 3.7.2 kalroth

--xintensity 4 --worksize 256 -g 2 --shaders 1792 --gpu-engine 995 --gpu-memclock 1250 --gpu-powertune 10 --thread-concurrency 16384

You can try to increase --thread-concurrency , every card is a little bit different.

I´m using a modified bios with core voltage @ 1,081 V instead of stock 1,25 V, for lower wattage.

If you are using stock vcore voltage you can try to increase --gpu-engine in 5Mhz steps until drivers crash, then go back 10Mhz.

Thanks

I'll try your settings, out of curiousity why is the thread concurrency so low on yours?

I heard many 7950 should run at least 20500 for that setting but as you said I realize that every card is a little different & at the moment my card is stock just turned up the fans with GPU-Tweak

jgaspar

member

Activity: 239

Merit: 10

Quote from: AllisionMarieLewis on May 01, 2014, 12:05:31 AM

Hi

Does anyone have some good settings they can share for the 7950 video card, for CGMiner. I'm using getting 576kh/s but I read that my card should be getting a lot more

If I set my intensity to high it crashes right away Huh

Not a lot more... a little more Grin

some 7950 will do 670 Kh/s heavily overclocked, but i won't recommend it, temps and consumption are much higher, overall i don´t think its worth it.

I usually do 600-610 KH/s with temps around 70-72C, these are my settings using CGminer 3.7.2 kalroth

--xintensity 4 --worksize 256 -g 2 --shaders 1792 --gpu-engine 995 --gpu-memclock 1250 --gpu-powertune 10 --thread-concurrency 16384

You can try to increase --thread-concurrency , every card is a little bit different.

I´m using a modified bios with core voltage @ 1,081 V instead of stock 1,25 V, for lower wattage.

If you are using stock vcore voltage you can try to increase --gpu-engine in 5Mhz steps until drivers crash, then go back 10Mhz.

I'm getting similar or better results with SGMiner 4.1.153 with the added bonus of being capable to mine a lot more ALGO's

CaliforniaCoinCAC

full member

Activity: 126

Merit: 100

Quote from: ea$ySTRe3T on May 01, 2014, 12:33:28 AM

Interesting to see how quickly this community developed. It's true that the California people stick together lol

I'm mining this one for the next few weeks. Hope to be able to trade this on the exchanges soon for BTC/LTC

and hey what about those pools dev team can we get some updates please that would be great

Pool should be up shortly we thank you for your continued support in the mean time please tell your friends about CaliforniaCoin

Also feel free to join our group Chat on Skype!

Add: TheCaliforniaCoin On Skype To Join Our Chat Group! Everyone's Welcome! Newbies & Veterans!

ea$ySTRe3T

full member

Activity: 154

Merit: 100

Interesting to see how quickly this community developed. It's true that the California people stick together lol

I'm mining this one for the next few weeks. Hope to be able to trade this on the exchanges soon for BTC/LTC

and hey what about those pools dev team can we get some updates please that would be great

Topic: [ANN] California Coin | SwissCex + C-CEX | California Coin Up 737.25 % This Week - page 208. (Read 160998 times)