CCMINER crashes-
My rig is running smoothly with nearly 3500 accepts since this morning before school. My other, headless, rig has been running for a couple days, with v1.4.9. I ssh into either rig and open "screen" via the command line. I close out of "screen" when gone.
I had poor luck on the problem rig when running it with keyboard and attached monitor. -scryptr
p.s. -currently on NiceHash two 6-card nVidia 750ti rigs mining X11 earn less than one 6-card AMD 280x rig mining neoscrypt. But the 12 750ti cards consume one-half the electricity of the 6 280x cards. -scryptr
Topic: [ANN] ccminer 2.3 - opensource - GPL (tpruvot) - page 168. (Read 500193 times)
Great miner thanks! Waiting for neoScrypt implementation also.
Could you run it without screen to be able to give me the output on crash ? or maybe the stuff in dmesg
I run 2 linux instances since 24h, and one Windows since 33h...
I run 2 linux instances since 24h, and one Windows since 33h...
CCMINER Crashes-
I have currently over 350 accepts on my 6-card 750ti rig, about 1 hour of runtime. The rig is currently headless, with no video connection. The mining session was started via ssh and through the "screen" interface. I will check it again when I return from school after about 7-8 hours. The last few local sessions I started lasted less than 1 hour, running version 1.5.0. -scryptr
I have currently over 350 accepts on my 6-card 750ti rig, about 1 hour of runtime. The rig is currently headless, with no video connection. The mining session was started via ssh and through the "screen" interface. I will check it again when I return from school after about 7-8 hours. The last few local sessions I started lasted less than 1 hour, running version 1.5.0. -scryptr
i will work on the hardware faults for the 1.5.0 (to try to continue if only one card is failing) but its not won 
CCMINER Crashes:
Versions 1.4.9 and 1.5.0 have been crashing, both Linux builds. They compile readily, and mine X11 at about 16500-17000 khs. This is on a 750ti 6-card rig. I run a fresh install of Ubuntu 14.04.1 with Nvidia 346.16 drivers. It is a hard crash, no video, requiring a cold reboot. The machine is stable with no miner running, i have not installed classic ccminer for a control test just yet. -scryptr
p.s.- older versions of DJM's CCMINER mined x11 at about 15500 khs, and on NVIDIA 340.* drivers. My cards run at stock speeds. -scryptr
Versions 1.4.9 and 1.5.0 have been crashing, both Linux builds. They compile readily, and mine X11 at about 16500-17000 khs. This is on a 750ti 6-card rig. I run a fresh install of Ubuntu 14.04.1 with Nvidia 346.16 drivers. It is a hard crash, no video, requiring a cold reboot. The machine is stable with no miner running, i have not installed classic ccminer for a control test just yet. -scryptr
p.s.- older versions of DJM's CCMINER mined x11 at about 15500 khs, and on NVIDIA 340.* drivers. My cards run at stock speeds. -scryptr
Damn ... x11 for the notices ? I had a local commit on windows when i made the binaries :/ but that doesnt explain your crashes...
I ran it several hours before the release... Its the same on the big exe and 50 one ?
I ran it several hours before the release... Its the same on the big exe and 50 one ?
ccminer 1.4.9 crashes after some time with 6x 750 ti
same here. and getting lots of "does not validate on cpu"?
did you get the 1.4.9 on github ? and what were you mining / solo or stratum ?
ccminer 1.4.9 crashes after some time with 6x 750 ti, djm version works over a week without problems :/
i get less hash on x11 750ti and no improvement on quark.
EDIT: I should say no improvement on x11.
EDIT: I should say no improvement on x11.
there was not... i made not changes in cuda in the last 2 versions
but - you made a better average hash output... I think he missed this point.
there was not... i made no changes in cuda in the last 2 versions
i get less hash on x11 750ti and no improvement on quark.
EDIT: I should say no improvement on x11.
EDIT: I should say no improvement on x11.
oh, and select Release x86, not Debug
yep thanks
oh, and select Release x86, not Debug
just open the project and compile, nothing more
ok thanks
just open the project and compile, nothing more
Nothing to do, its why i made that
ok but in my folder to compile is the older curl do i keep that there?
Nothing to do, its why i made that
Jump to: