[ANN] Credits(CRDS): CPU-only mining | Argon2d PoW - Masternodes - page 54.

muffel

newbie

Activity: 3

Merit: 0

Quote from: J0HN3F1V3 on January 01, 2018, 08:41:12 PM

You could try the non AVX2 version which can be found on the download page of the github
https://github.com/CRDS/Credits/releases
The file credits-1.1.1-linux.tar.gz is the non AVX2 version

Thanks for your answer! Unfortunately this was the version I was using. I downloaded it again from the link you provided. If you look at 0x698505 (of creditsd) you can see the problematic instruction I quoted is present on this version.

primeval

full member

Activity: 213

Merit: 104

Sorry for not joining all of you on Discord. Some may remember me from Slack, I was around since launch day. I have been following the progress, and am happy to see there is a strong community forming around CRDS. I'm considering donating a BTC or so to help with exchange listings. (No, this is not altruism, as a CRDS whale, I stand to gain much more back long term. I had previously donated 0.1 BTC or so way back when.) If there's a list to the cost of listing on exchanges for CRDS, please point me to it.

J0HN3F1V3

full member

Activity: 244

Merit: 100

Quote from: muffel on January 01, 2018, 03:34:29 PM

I wanted to try the Linux version on an Intel i7-2600 cpu. So I selected "Not Listed / unsure" on the download page.

Unfortuantely the daemon crashed repeatedly after a while when I was trying to mine ("illegal instruction"). I therefore looked through the dump and stumbled across

Code:

0x698505        vpxor  (%rsi,%rax,1),%ymm0,%ymm0

which is an AVX2 instruction afaik. Is there any Linux build without relying on AVX2 available? Shouldn't the "generic" version work without this instruction set?

Thanks!

You could try the non AVX2 version which can be found on the download page of the github
https://github.com/CRDS/Credits/releases
The file credits-1.1.1-linux.tar.gz is the non AVX2 version

muffel

newbie

Activity: 3

Merit: 0

I wanted to try the Linux version on an Intel i7-2600 cpu. So I selected "Not Listed / unsure" on the download page.

Unfortuantely the daemon crashed repeatedly after a while when I was trying to mine ("illegal instruction"). I therefore looked through the dump and stumbled across

Code:

0x698505        vpxor  (%rsi,%rax,1),%ymm0,%ymm0

which is an AVX2 instruction afaik. Is there any Linux build without relying on AVX2 available? Shouldn't the "generic" version work without this instruction set?

Thanks!

Minted Crypto

newbie

Activity: 47

Merit: 0

I am new to the coin and I am trying to collect as much more as possible before I invest.
Where can I see at least a price chart to see how the coin moved from its creation until present time.
I am not sure where I can find more info about your masternodes - how many you have running and what is the current ROI.

TRON_NZ

newbie

Activity: 15

Merit: 0

The master node tutorial on the main website needs to be updated for daemon version 1.1.1. Currently the PDF tutorial download link is for the older version 1.1.0 and will fault the masternode daemon with this error "Invalid protocol for Masternode, only IPv4 is supported."

Changing to version to 1.1.1 fixed everything i.e. status to "ENABLED", hope this helps someone....

TRON_NZ

newbie

Activity: 15

Merit: 0

Quote from: TRON_NZ on December 31, 2017, 01:42:02 AM

Looking for help for with a master node, I have gone through the tutorial completely but cannot start the master node from the wallet, it just says "Alias:MN1 Failed to start Masternode Error:" and is stuck on MISSING status.

Actual VPS states: "status": "Node just started, not yet activated"

All the configs look perfect i.e. setup correctly as per the site tutorial...

I have waited 15+ confirmations for the 5000 coins, is there any basic info Im missing? Thanks in advance

Solved, for some reason it stated a mismatch in debug file. Re-did the transaction for 5000 coin and waited 16+ confirmations and it worked this time around...Not sure why exactly it worked this time but its working

TRON_NZ

newbie

Activity: 15

Merit: 0

Looking for help for with a master node, I have gone through the tutorial completely but cannot start the master node from the wallet, it just says "Alias:MN1 Failed to start Masternode Error:" and is stuck on MISSING status.

Actual VPS states: "status": "Node just started, not yet activated"

All the configs look perfect i.e. setup correctly as per the site tutorial...

I have waited 15+ confirmations for the 5000 coins, is there any basic info Im missing? Thanks in advance

realediston

full member

Activity: 277

Merit: 100

Earn it

Looking to buy 50000 CREDITS

Anyone selling? PM
Best
Edi

mrankin

full member

Activity: 312

Merit: 102

I'm giving away 500 CRDS to one lucky person who retweets the below, so spread the word and get your chance at 500 CRDS!

https://twitter.com/credits_crds/status/946664147101433861

crazy72

jr. member

Activity: 44

Merit: 1

Issue solved restarting the wallet..i didn't do it before becausse I was scared to loose the last open door.
Anyway restarting the wallet all is like before...wallet unencrypted.

very very strange what happened.

crazy72

jr. member

Activity: 44

Merit: 1

Please help me. I followed all the guide to startup a masternode, I did a self-payment etc etc and masternode was going to be enabled.
After 10 mins I checked the status and it was expired, so I tried to re-enable it and I found that my wallet was encrypted.
But I never set a password and I'm sure because the self payment I did was not requesting any password.
Now I have the wallet open and I don't know what to do...How is possible to have it encrypted without any notice ?
I tried on another pc and you receive a lot of warning before the encryption.
creating a masternode I was not exposing any info...so how it was possible ?
I can find the password somewhere ?

Please, i just have my first 5k crds on it.

Thanks
Chris

loremipsum

hero member

Activity: 644

Merit: 501

Quote from: soulcancer on December 29, 2017, 06:40:06 PM

hello ppl...this is my first qt miner experience...for some reason I thought it would be harder than writing a .bat file.....I assume that "hashratepersec" is me....how do u know when u find a block???...just balance increase??...thanx

edit: hashespersec

That's right, gethashespersec gives your hashrate, to see the whole network hashrate type getnetworkhashps. Yes, when you find a block you will see it on the wallet and your balance will increase. Of note, it may take several hours to find a block or even more than 24hrs.

Quote from: ?? on ??

Quote from: loremipsum on December 29, 2017, 08:11:38 PM

Quote from: ?? on ??

Quote from: loremipsum on December 29, 2017, 07:28:19 PM

Quote from: mainconcept on December 29, 2017, 06:11:16 PM

Quote from: hoolio on December 29, 2017, 06:00:06 PM

What's going on with the price? Its 5x since last week, but almost no news here. BTW are there any plans for adding the coin to new exchanges?

Same question here. Maybe tradesatohi could be an alternative as a second exchange. A 2nd exchange could gain more people to CRDS.

There was a wallet update (v.1.1.1) which resolves the wallets crashing. Also, we are looking for new exchanges but right now nothing is confirmed.

In addition, in January 2018 there will be a CRDS airdrop from the premined funds. We will post more details in the coming week.

I am looking on more info about mining this coin can i be directed in the right direction I have ryzen 7 and have downloaded the windowss qt wallet , sorry for the newbie questions

Go to tools -> debug console and type setgenerate true -1
Then, to see your hashrate type gethashespersec

thanks Boss much appreciated

Right now we are around 5.4MH. With the ryzen you will probably find at least 1 block per 24hours.

loremipsum

hero member

Activity: 644

Merit: 501

Quote from: ?? on ??

Quote from: loremipsum on December 29, 2017, 07:28:19 PM

Quote from: mainconcept on December 29, 2017, 06:11:16 PM

Quote from: hoolio on December 29, 2017, 06:00:06 PM

What's going on with the price? Its 5x since last week, but almost no news here. BTW are there any plans for adding the coin to new exchanges?

Same question here. Maybe tradesatohi could be an alternative as a second exchange. A 2nd exchange could gain more people to CRDS.

There was a wallet update (v.1.1.1) which resolves the wallets crashing. Also, we are looking for new exchanges but right now nothing is confirmed.

In addition, in January 2018 there will be a CRDS airdrop from the premined funds. We will post more details in the coming week.

I am looking on more info about mining this coin can i be directed in the right direction I have ryzen 7 and have downloaded the windowss qt wallet , sorry for the newbie questions

Go to tools -> debug console and type setgenerate true -1
Then, to see your hashrate type gethashespersec

loremipsum

hero member

Activity: 644

Merit: 501

Quote from: mainconcept on December 29, 2017, 06:11:16 PM

Quote from: hoolio on December 29, 2017, 06:00:06 PM

What's going on with the price? Its 5x since last week, but almost no news here. BTW are there any plans for adding the coin to new exchanges?

Same question here. Maybe tradesatohi could be an alternative as a second exchange. A 2nd exchange could gain more people to CRDS.

There was a wallet update (v.1.1.1) which resolves the wallets crashing. Also, we are looking for new exchanges but right now nothing is confirmed.

In addition, in January 2018 there will be a CRDS airdrop from the premined funds. We will post more details in the coming week.

soulcancer

member

Activity: 276

Merit: 12

Life is toxic...CHUG IT!!

hello ppl...this is my first qt miner experience...for some reason I thought it would be harder than writing a .bat file.....I assume that "hashratepersec" is me....how do u know when u find a block???...just balance increase??...thanx

edit: hashespersec

mainconcept

sr. member

Activity: 588

Merit: 422

Quote from: hoolio on December 29, 2017, 06:00:06 PM

What's going on with the price? Its 5x since last week, but almost no news here. BTW are there any plans for adding the coin to new exchanges?

Same question here. Maybe tradesatohi could be an alternative as a second exchange. A 2nd exchange could gain more people to CRDS.

CryptoWinner

full member

Activity: 147

Merit: 100

Quote from: hoolio on December 29, 2017, 06:00:06 PM

What's going on with the price? Its 5x since last week, but almost no news here. BTW are there any plans for adding the coin to new exchanges?

Even small exchanges are very expensive. Probably best way is to create a strong community and try voting method. I mine CRDS on my PC, waiting to earn 5k for masternode...

hoolio

sr. member

Activity: 273

Merit: 251

What's going on with the price? Its 5x since last week, but almost no news here. BTW are there any plans for adding the coin to new exchanges?

J0HN3F1V3

full member

Activity: 244

Merit: 100

Quote from: fishervwb on December 29, 2017, 12:59:21 PM

Testing of security and efficiency of the peer-to-peer network

Tomorrow, December 30th, CREDITS.com Development team begins complex testing of security and efficiency of the peer-to-peer network. CTO & CoFounder of CREDITS Evgeniy Butyaev shares the details: “The testing process includes connecting nodes, conducting the first transactions, transfering credits (our internal currency) between accounts and emulating the error of double spending. The testing process will last for about a week. The first results will be available on January 5.” We will keep you informed about all our technical developments and important steps we make! Follow us for further updates. https://credits.com/en/Home/NewsItem/1206

Again this is a different coin called Credits, they stole our name..
And from now on will be known as the fake Credits..

Topic: [ANN] Credits(CRDS): CPU-only mining | Argon2d PoW - Masternodes - page 54. (Read 482497 times)