Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 1085. (Read 3426947 times)
August 26, 2013, 08:03:28 PM
Any chance this gets adapted for the Yacoin family, those scrypt coins with a higher N factor? AMD cards performance are taking a bigger hit with higher N than CPU. Would the performance gap between Nvidia and AMD cards also narrow?
August 26, 2013, 05:55:11 PM
i've been way busy and not looked into this and i also haven't had a freeze up in ages..
the dev popped by earlier but again kind brushed off 99.99% of anything i say.
to recap the build on page 1 may just freeze on you and the build i uploaded instead of that
will fire up a message box asking you to debug etc (depending on your OS config etc)
so i didn't fix the problem but at least my build will give ya a warning that, hey.. the piece of shit crashed and froze lol
and READ the README ..its worth it trust me
seems every who comments here is not doing that
the dev popped by earlier but again kind brushed off 99.99% of anything i say.
to recap the build on page 1 may just freeze on you and the build i uploaded instead of that
will fire up a message box asking you to debug etc (depending on your OS config etc)
so i didn't fix the problem but at least my build will give ya a warning that, hey.. the piece of shit crashed and froze lol
and READ the README ..its worth it trust me
seems every who comments here is not doing that
August 26, 2013, 04:23:29 PM
Yes, i had the same issue. Make sure you set it up, get on a pool, etc. You dont have to make a bat tho if you dont know how and i prefer short cuts anyways. You can right click, create short cut to desktop, then right click the short cut, go to properties, and on the target, just type the command like stoneyshows above.
Btw, Thanks for the wemineltc pool suggestions, its night and day difference!
Also, anyone still trying to fix that stratum failed to parse error? Would love a fix o.O, is it not that common? I would expect it to be fairly common..
Btw, Thanks for the wemineltc pool suggestions, its night and day difference!
Also, anyone still trying to fix that stratum failed to parse error? Would love a fix o.O, is it not that common? I would expect it to be fairly common..
August 24, 2013, 03:30:29 PM
any qlue what this is all about
What parameters are you running the program with? It looks like your just launching it without anything. You need to tell the program which miner pool you are using, etc... Do you know how to create a .bat file?
You need to create a .bat file with something like this inside it and launch the .bat file instead of the .exe file.
cudaminer.exe -d 0 -i 1 -C 0 -o stratum+tcp://us3.wemineltc.com:3333 -O username:password
August 24, 2013, 03:27:15 PM
any qlue what this is all about
Solo mining? or using a proxy?
And you're too much of a jerk to help, welcome to *nix.
August 20, 2013, 04:11:37 PM
any qlue what this is all about
Solo mining? or using a proxy?
August 20, 2013, 02:26:57 PM
any qlue what this is all about
Solo mining? or using a proxy?
August 20, 2013, 09:04:47 AM
August 20, 2013, 08:53:50 AM
any ideas whether its worth me attemping with my 7900GTs or GTS 250s with this?
7900GTs don't support CUDA
Ah didnt know that... i do now
Quote
a GTS 250 will do, but don't expect stellar khash/s values.
any ideas what to expect? i have a small AMD/ATI rig atm chucking out 0.65-0.75Mhash atm i was interested in seeing what my old gaming rig can chuck out - i have 2 Inno3D GTS 250s (512MB) in SLI in it...
August 20, 2013, 08:35:34 AM
any ideas whether its worth me attemping with my 7900GTs or GTS 250s with this?
7900GTs don't support CUDA
a GTS 250 will do, but don't expect stellar khash/s values.
August 20, 2013, 07:59:41 AM
any ideas whether its worth me attemping with my 7900GTs or GTS 250s with this?
August 20, 2013, 01:29:35 AM
yup agreed i went there too.. good pool
i HAVE to find a way to fix that error soon too
my miner crashed after i went to sleep and was not running for hrs..
so pissed off lol
i HAVE to find a way to fix that error soon too
my miner crashed after i went to sleep and was not running for hrs..
so pissed off lol
I switched back to the external stratum.
August 17, 2013, 02:23:38 PM
its adjusted by intensity 0/1 toggle..
that will make it use a bit less if you have only 1 gpu.
also from there you set up the config with the number x number settings
first time you run it, it will try and auto setup the config for you..
so you have to use --no-autotune to make it use your specific setting
and when you first launch you can see some settings it tried out you can play with
check out the readme
that will make it use a bit less if you have only 1 gpu.
also from there you set up the config with the number x number settings
first time you run it, it will try and auto setup the config for you..
so you have to use --no-autotune to make it use your specific setting
and when you first launch you can see some settings it tried out you can play with
check out the readme
August 17, 2013, 01:54:32 PM
Thanks, I will try it next payout. Do you guys use the mining proxy? or just what cudaminer has built in?
Also, anyone know how to turn down the intensity? Is it just he kernal config?
Also, anyone know how to turn down the intensity? Is it just he kernal config?
August 17, 2013, 03:10:43 AM
yup agreed i went there too.. good pool
i HAVE to find a way to fix that error soon too
my miner crashed after i went to sleep and was not running for hrs..
so pissed off lol
i HAVE to find a way to fix that error soon too
my miner crashed after i went to sleep and was not running for hrs..
so pissed off lol
August 17, 2013, 01:18:06 AM
Ditto
August 16, 2013, 06:48:57 PM
August 16, 2013, 06:00:21 PM
So who do you guys recommend?
August 16, 2013, 05:02:03 PM
t hubs mining proxy? Is it possible coinotron just has a shitty connection?
I moved away from coinotron for this very reason. to many error popped up even after build in stratum support in cudaminer.
ya i dropped it ages ago for same kinda reason.. even with stratumproxy and older cudaminer i had problems
August 16, 2013, 03:58:04 PM
t hubs mining proxy? Is it possible coinotron just has a shitty connection?
I moved away from coinotron for this very reason. to many error popped up even after build in stratum support in cudaminer.
Jump to: