[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 355.

StuffOfInterest

sr. member

Activity: 401

Merit: 250

Quote from: Bombadil on June 13, 2014, 09:08:59 PM

Yep, I have a compiled version for compute 3.0, 3.5 and 5.0: https://bitcointalksearch.org/topic/m.7299983
(Compute 2.0 isn't possible anymore, compute 3.5 & 5.0 are merged into one exe ^^" ccminer35-50.exe, this gets confusing)

Nice, that bumped my two GTX 750 Ti cards from 4200 khash/s to ~~5000~~ 5200 khash/s on X11.

cayars

full member

Activity: 168

Merit: 100

Quote from: cbuchner1 on June 13, 2014, 07:21:36 PM

Quote from: djm34 on June 13, 2014, 07:15:51 PM

so I guess now jpc algo is using a lot more groestl Grin

Previously Groestl was also eliminated in the 1st and 2nd rounds, leaving only 1/4th
of the hashes to be evaluated.

Now with the faster Groestl I made it run Groestl in the 2nd round too. So half the
hashes are fully evaluated now. It's faster in the end - this is what counts.

Christian

Would it have remained faster by leaving it out and still just doing what you were doing before?

Why the change?

Bombadil

hero member

Activity: 644

Merit: 500

Quote from: Starscream on June 13, 2014, 09:25:33 PM

Thanks Bombadil for the quick upload!

BTW, what settings are you using for your 750ti? (core/mem clocks and do you over volt?)

+60core, +200mem, +31mv. I don't know if going lower could work too, but this is the highest I could get for both my EVGA SC one and Gigabyte one (same main desktop rig).
So give it a go if you're into OC Wink

sticknutzhash

newbie

Activity: 11

Merit: 0

Quote from: Bombadil on June 13, 2014, 09:08:59 PM

Quote from: sticknutzhash on June 13, 2014, 08:55:49 PM

Quote from: Bombadil on June 13, 2014, 08:44:52 PM

Quote from: dpcoinz on June 13, 2014, 08:37:06 PM

Is the source code out? I searched and couldn't find the ccminer v1.1 source code on the git. Can someone point me to it if it is out?

Thanks

Github: https://github.com/cbuchner1/ccminer
Diff from latest commit: https://github.com/cbuchner1/ccminer/commit/3b210695040903702482ec14e8fce421bd171b92

Does someone have a link to a compiled version of the "killer groestl" release? I don't know the first thing about compiling from github... Wink

Yep, I have a compiled version for compute 3.0, 3.5 and 5.0: https://bitcointalksearch.org/topic/m.7299983
(Compute 2.0 isn't possible anymore)

Thanks Bombadil!

Starscream

sr. member

Activity: 364

Merit: 250

Thanks Bombadil for the quick upload! and of course thanks cbuchner1!

BTW, what settings are you using for your 750ti? (core/mem clocks and do you over volt?)

grendel25

legendary

Activity: 2296

Merit: 1031

What's the best 750 ti vendor? I have Asus but haven't been impressed. Anyone with a specific part number or links or wants to PM me ingo... thx

reviks

newbie

Activity: 9

Merit: 0

newest miner for talkcoin great improvement Tongue

Nvidia for life next goal out do the ati noobs again https://www.nicehash.com/multialgo/ their newest miner can multi algo but has no talkcoin support yet

so go bosses go

Bombadil

hero member

Activity: 644

Merit: 500

Quote from: sticknutzhash on June 13, 2014, 08:55:49 PM

Quote from: Bombadil on June 13, 2014, 08:44:52 PM

Quote from: dpcoinz on June 13, 2014, 08:37:06 PM

Is the source code out? I searched and couldn't find the ccminer v1.1 source code on the git. Can someone point me to it if it is out?

Thanks

Github: https://github.com/cbuchner1/ccminer
Diff from latest commit: https://github.com/cbuchner1/ccminer/commit/3b210695040903702482ec14e8fce421bd171b92

Does someone have a link to a compiled version of the "killer groestl" release? I don't know the first thing about compiling from github... Wink

Yep, I have a compiled version for compute 3.0, 3.5 and 5.0: https://bitcointalksearch.org/topic/m.7299983
(Compute 2.0 isn't possible anymore, compute 3.5 & 5.0 are merged into one exe ^^" ccminer35-50.exe, this gets confusing)

noobminerd

member

Activity: 61

Merit: 10

I getting a boots for 670/660ti but seems that 750ti it's faster now or my build/drivers are affecting me.

dpcoinz

newbie

Activity: 24

Merit: 0

I'm getting the following errors compiling ccminer v1.1 on linux. I'm using cuda6 libraries. Is it possible that the __shfl operation isn't in there?

groestl_functions_quad.cu(258): error: identifier "__shfl" is undefined

groestl_functions_quad.cu(263): error: identifier "__shfl" is undefined

groestl_functions_quad.cu(268): error: identifier "__shfl" is undefined

bitslice_transformations_quad.cu( Cool

: error: identifier "__shfl" is undefined

bitslice_transformations_quad.cu(414): error: identifier "__shfl" is undefined

GarlukKY

member

Activity: 81

Merit: 10

Thanks, Christian. Just in time!! Parts started arriving today for my new box Grin

Just 4x 750ti, but with a ROI of ~3 months, I couldn't see myself NOT doing it.

sticknutzhash

newbie

Activity: 11

Merit: 0

Quote from: Bombadil on June 13, 2014, 08:44:52 PM

Quote from: dpcoinz on June 13, 2014, 08:37:06 PM

Is the source code out? I searched and couldn't find the ccminer v1.1 source code on the git. Can someone point me to it if it is out?

Thanks

Github: https://github.com/cbuchner1/ccminer
Diff from latest commit: https://github.com/cbuchner1/ccminer/commit/3b210695040903702482ec14e8fce421bd171b92

Does someone have a link to a compiled version of the "killer groestl" release? I don't know the first thing about compiling from github... Wink

dpcoinz

newbie

Activity: 24

Merit: 0

Quote from: Bombadil on June 13, 2014, 08:44:52 PM

Quote from: dpcoinz on June 13, 2014, 08:37:06 PM

Is the source code out? I searched and couldn't find the ccminer v1.1 source code on the git. Can someone point me to it if it is out?

Thanks

Github: https://github.com/cbuchner1/ccminer
Diff from latest commit: https://github.com/cbuchner1/ccminer/commit/3b210695040903702482ec14e8fce421bd171b92

Thanks Bomba. I was looking at the wrong git. duh! By the way thanks for all the profitability pastes. I reference them all the time.

Bombadil

hero member

Activity: 644

Merit: 500

Quote from: dpcoinz on June 13, 2014, 08:37:06 PM

Is the source code out? I searched and couldn't find the ccminer v1.1 source code on the git. Can someone point me to it if it is out?

Thanks

Github: https://github.com/cbuchner1/ccminer
Diff from latest commit: https://github.com/cbuchner1/ccminer/commit/3b210695040903702482ec14e8fce421bd171b92

dpcoinz

newbie

Activity: 24

Merit: 0

Is the source code out? I searched and couldn't find the ccminer v1.1 source code on the git. Can someone point me to it if it is out?

Thanks

Dotcommie

sr. member

Activity: 476

Merit: 250

Quote from: tc61 on June 13, 2014, 08:14:38 PM

Quote from: Dotcommie on June 13, 2014, 08:01:44 PM

5.25MH seems to be a better estimate on jackpot unless my 3 brands are just all bad at overclocking. My EVGA FTW cards come overclocked with tdp raised so i'm able to get 5.5 out of those with +10 core and +400 memory, but my MSI Gaming get close and most of my Gigabyte 750Ti's look like they're averaging 5.25.

Could do more but everytime I use normally stable overclocks with ccminer it spits out large hash numbers and stops working again. Happens on any of my rigs so I know it's not hardware or anything else. I've seen most people here with that issue as well, but hey if there's a fix I'd love to hear about so I can just leave them at the perfect overclock.

Dotcommie you still over at minep.it? I saw you on JPC but they are finding blocks so slowly...still the case?
Posted from Bitcointa.lk - #Sm9nCGOwkJUe6Lvn

Yeah today seems much slower even with the same network hash and lower overall difficulty. It should all even out though. Says we're at 98% so may find a block soonish? All we need are a few more people with 30+MH and it should help quite a bit. If we could get to 500MH I'd be happy. It's funny watching the difficulty and hashrate, yet the price stays in the same area or goes down a little. People want to keep it down until they mine them all up? Cheesy

djm34

legendary

Activity: 1400

Merit: 1050

some other numbers: 750ti 780ti (OC)
   Myr-groestl 12.8MHash/s 26.7MHash/s
   Groestl 7.6MHash/s 15.6MHash/s
   X11 2.7MHash/s 5.8MHash/s

Regarding pure groestl and myr-groestl, the R9 290x with the new 14.6 drivers is also doing rather well 14.6MHash/s on groestl and around 26MHash on myr-groestl (but still rather bad on jpc at 4.1MHash/s)

tc61

hero member

Activity: 494

Merit: 500

Quote from: Dotcommie on June 13, 2014, 08:01:44 PM

5.25MH seems to be a better estimate on jackpot unless my 3 brands are just all bad at overclocking. My EVGA FTW cards come overclocked with tdp raised so i'm able to get 5.5 out of those with +10 core and +400 memory, but my MSI Gaming get close and most of my Gigabyte 750Ti's look like they're averaging 5.25.

Could do more but everytime I use normally stable overclocks with ccminer it spits out large hash numbers and stops working again. Happens on any of my rigs so I know it's not hardware or anything else. I've seen most people here with that issue as well, but hey if there's a fix I'd love to hear about so I can just leave them at the perfect overclock.

Dotcommie you still over at minep.it? I saw you on JPC but they are finding blocks so slowly...still the case?
Posted from Bitcointa.lk - #Sm9nCGOwkJUe6Lvn

Bombadil

hero member

Activity: 644

Merit: 500

Quote from: Dotcommie on June 13, 2014, 08:01:44 PM

Quote from: Bombadil on June 13, 2014, 07:49:18 PM

So, does this seem correct for one 750ti?:
-X11:2.6MH/s
-Jackpot:5.5MH/s
-NIST5: 8.4MH/s
-Quark: 4.7MH/s
-Groestl: 8MH/s (!!!!!! was 3.1MH/s before !!!!!)

I used these numbers to generate following list for one 750ti: http://pastebin.com/xcFqtX9E
Still old hashrates for X13. Want to see Christian's magic first

Again, this list is only a snapshot for this moment, with current prices and difficulties, so lower your own estimates.

5.25MH seems to be a better estimate on jackpot unless my 3 brands are just all bad at overclocking. My EVGA FTW cards come overclocked with tdp raised so i'm able to get 5.5 out of those with +10 core and +400 memory, but my MSI Gaming get close and most of my Gigabyte 750Ti's look like they're averaging 5.25.

Could do more but everytime I use normally stable overclocks with ccminer it spits out large hash numbers and stops working again. Happens on any of my rigs so I know it's not hardware or anything else. I've seen most people here with that issue as well, but hey if there's a fix I'd love to hear about so I can just leave them at the perfect overclock.

Hah, yeah, should've taken the overclock down. Anyways, ratio's are shifting, as you can see Wink

GRS is becoming 'interesting' again Tongue

I get such a freak-out only when it's too hot where my rig is ^^" Else +60core, +200mem, +31mV works fine for me (one EVGA SC and one Gigabyte)

Dotcommie

sr. member

Activity: 476

Merit: 250

Quote from: Bombadil on June 13, 2014, 07:49:18 PM

So, does this seem correct for one 750ti?:
-X11:2.6MH/s
-Jackpot:5.5MH/s
-NIST5: 8.4MH/s
-Quark: 4.7MH/s
-Groestl: 8MH/s (!!!!!! was 3.1MH/s before !!!!!)

I used these numbers to generate following list for one 750ti: http://pastebin.com/xcFqtX9E
Still old hashrates for X13. Want to see Christian's magic first

Again, this list is only a snapshot for this moment, with current prices and difficulties, so lower your own estimates.

5.25MH seems to be a better estimate on jackpot unless my 3 brands are just all bad at overclocking. My EVGA FTW cards come overclocked with tdp raised so i'm able to get 5.5 out of those with +10 core and +400 memory, but my MSI Gaming get close and most of my Gigabyte 750Ti's look like they're averaging 5.25.

Could do more but everytime I use normally stable overclocks with ccminer it spits out large hash numbers and stops working again. Happens on any of my rigs so I know it's not hardware or anything else. I've seen most people here with that issue as well, but hey if there's a fix I'd love to hear about so I can just leave them at the perfect overclock.

Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 355. (Read 3426976 times)