Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 514. (Read 3426976 times)
May 07, 2014, 02:23:14 PM
I am quiting solominig jackpotcoin , too many orphans i find , going back to pool .
May 07, 2014, 01:57:53 PM
all versions of ccminer has crashed for me as well, I cant find the problem. I have an ASUS 750Ti OC. Mining HVC.
How much oc if any? I've only had hvc crash with too much oc.
The card is oc, I havent over clocked it any. I have had the crash problems for weeks now. Even some times I have to re-install the drivers of all 4 cards
hrm, I didn't test hvc last time, can you try ccminer with a different coin? i.e. Jackpotcoin or mjollnircoin
May 07, 2014, 01:55:35 PM
Hey y'all !
I've been using CudaMiner since last December on various Nvidia cards/Gpu's.
I currently mine with an MSI 750 ti (gaming edition).
My question: is ccMiner going to replace CudaMiner, or are both going to be supported?
Can anyone explain (like I'm 5 years old) what the differences are ?
Thanks !
CCMiner puts the triangles in the right holes
May 07, 2014, 01:53:53 PM
Hey y'all !
I've been using CudaMiner since last December on various Nvidia cards/Gpu's.
I currently mine with an MSI 750 ti (gaming edition).
My question: is ccMiner going to replace CudaMiner, or are both going to be supported?
Can anyone explain (like I'm 5 years old) what the differences are ?
Thanks !
CCMiner puts the triangles in the right holes
you made me LOL !
May 07, 2014, 01:31:56 PM
Hey y'all !
I've been using CudaMiner since last December on various Nvidia cards/Gpu's.
I currently mine with an MSI 750 ti (gaming edition).
My question: is ccMiner going to replace CudaMiner, or are both going to be supported?
Can anyone explain (like I'm 5 years old) what the differences are ?
Thanks !
CCMiner puts the triangles in the right holes
May 07, 2014, 01:30:48 PM
What sort of power draw are people seeing on quark vs other algos on 750Ti? Not had time to try the latest CCminer.
Unfortunately I don't have enough time to keep up with the (brilliant!) pace of development and speculate on early mining of new coins; however, with the high cost of power and falling BTC/USD the profitability of lower power use coins improves.
Maybe some may act as decent 'set it and forget it coins' where I can sell at the end of a weeks mining or using autosell? At the moment scrypt-ChaCha/Jane seem to be the best for that.
Unfortunately I don't have enough time to keep up with the (brilliant!) pace of development and speculate on early mining of new coins; however, with the high cost of power and falling BTC/USD the profitability of lower power use coins improves.
Maybe some may act as decent 'set it and forget it coins' where I can sell at the end of a weeks mining or using autosell? At the moment scrypt-ChaCha/Jane seem to be the best for that.
I think yac is the best for that, but securecoin might be close.
May 07, 2014, 01:18:28 PM
What sort of power draw are people seeing on quark vs other algos on 750Ti? Not had time to try the latest CCminer.
Unfortunately I don't have enough time to keep up with the (brilliant!) pace of development and speculate on early mining of new coins; however, with the high cost of power and falling BTC/USD the profitability of lower power use coins improves.
Maybe some may act as decent 'set it and forget it coins' where I can sell at the end of a weeks mining or using autosell? At the moment scrypt-ChaCha/Jane seem to be the best for that.
Unfortunately I don't have enough time to keep up with the (brilliant!) pace of development and speculate on early mining of new coins; however, with the high cost of power and falling BTC/USD the profitability of lower power use coins improves.
Maybe some may act as decent 'set it and forget it coins' where I can sell at the end of a weeks mining or using autosell? At the moment scrypt-ChaCha/Jane seem to be the best for that.
May 07, 2014, 01:05:44 PM
all versions of ccminer has crashed for me as well, I cant find the problem. I have an ASUS 750Ti OC. Mining HVC.
How much oc if any? I've only had hvc crash with too much oc.
The card is oc, I havent over clocked it any. I have had the crash problems for weeks now. Even some times I have to re-install the drivers of all 4 cards
May 07, 2014, 12:26:31 PM
all versions of ccminer has crashed for me as well, I cant find the problem. I have an ASUS 750Ti OC. Mining HVC.
How much oc if any? I've only had hvc crash with too much oc.
May 07, 2014, 12:16:48 PM
If skein algo it's already in the ccminer code is too difficult implement it for myr-skein?
May 07, 2014, 12:14:36 PM
all versions of ccminer has crashed for me as well, I cant find the problem. I have an ASUS 750Ti OC. Mining HVC.
May 07, 2014, 11:58:17 AM
What was we suppossed to do to special to mine on Dwarf pool with Saffron Coin? -f?
This is my config for dwarf-pool:
Code:
./ccminer/ccminer -t 1 -d 0 -a myr-gr \
-q -f 256 -o stratum+tcp://erebor.dwarfpool.com:3347 -u -p 1
-q -f 256 -o stratum+tcp://erebor.dwarfpool.com:3347 -u
The "-f 256" divides the difficulty by 256 to produce Shares.
Christian
May 07, 2014, 11:33:56 AM
My EVGA 750ti SC has been super stable. I've only had it for 3 weeks though. I haven't had a crash on it in a while. I've only used it on the ccminer/cudaminer Scrypt, Heavy, Jackpot, Malj, & Quark algo's. I'm running on win 7, 64bit, with settings of +89, +500. Card is installed directly on the PCI slot, I also use card to power the monitor and use that computer for doing MS Office documents and such.
I have a similar problem with my EVGA 750TI SC as well, but it only happens with quark as far as I've noticed - all of a sudden, low hash/clock, and no accepted shares.
I don't reboot though. If you're on windows, just go into device manager, disable, then re-enable that card. This reloads the drivers, and re-initializes the card. Should work for you as well.
Annoying as heck, though.
Mine does this even with stock clocks, and slightly underclocked. No problems with anything else, and can usually run +65/+300
When I'm mining with latest CCminer release (and all previous...) on my EVGA 750TI SC, its core frequency randomly drops to around 500Mhz, and nothing, except for a reboot, fixes this. It does this for every algo, after about half an hour. After that, I can't get any accepted going through. It's mining keccak flawlessly, so I'm leaving it at a MAX pool. But I love how its hashrate for, ea, quark is better than an R9 290 
EDIT: No problems at all for my gtx760, no other cards ATM (Gigabyte 750TI is in shipment )
EDIT: No problems at all for my gtx760, no other cards ATM (Gigabyte 750TI is in shipment
)I have a similar problem with my EVGA 750TI SC as well, but it only happens with quark as far as I've noticed - all of a sudden, low hash/clock, and no accepted shares.
I don't reboot though. If you're on windows, just go into device manager, disable, then re-enable that card. This reloads the drivers, and re-initializes the card. Should work for you as well.
Annoying as heck, though.
It means your overclock is too high. the 500MHz is some failsafe feature where the card goes after a crash
Mine does this even with stock clocks, and slightly underclocked. No problems with anything else, and can usually run +65/+300
May 07, 2014, 11:32:47 AM
Hey y'all !
I've been using CudaMiner since last December on various Nvidia cards/Gpu's.
I currently mine with an MSI 750 ti (gaming edition).
My question: is ccMiner going to replace CudaMiner, or are both going to be supported?
Can anyone explain (like I'm 5 years old) what the differences are ?
Thanks !
CCminer supports heavycoin, mjollnir, fugue256, groestl (and myriad-groestl), jackpotcoin & quark (and animecoin).
I hope they'll get combined into the same .exe one day
May 07, 2014, 11:25:09 AM
What was we suppossed to do to special to mine on Dwarf pool with Saffron Coin? -f?
May 07, 2014, 11:10:14 AM
Hey y'all !
I've been using CudaMiner since last December on various Nvidia cards/Gpu's.
I currently mine with an MSI 750 ti (gaming edition).
My question: is ccMiner going to replace CudaMiner, or are both going to be supported?
Can anyone explain (like I'm 5 years old) what the differences are ?
Thanks !
May 07, 2014, 10:49:07 AM
i tried to run it with anime algo, but it crashes. i have a gt240, but cudaminer works
May 07, 2014, 10:38:29 AM
Seems I have a lot of coin profitability calculations to do that I missed out on. MNR, BitQuark, JackpotCoin? Anything else I miss guys or are some of these already as good as dead? Thanks. Will release my calculation charts when done.
May 07, 2014, 10:12:08 AM
When I'm mining with latest CCminer release (and all previous...) on my EVGA 750TI SC, its core frequency randomly drops to around 500Mhz, and nothing, except for a reboot, fixes this. It does this for every algo, after about half an hour. After that, I can't get any accepted going through. It's mining keccak flawlessly, so I'm leaving it at a MAX pool. But I love how its hashrate for, ea, quark is better than an R9 290
EDIT: No problems at all for my gtx760, no other cards ATM (Gigabyte 750TI is in shipment )
EDIT: No problems at all for my gtx760, no other cards ATM (Gigabyte 750TI is in shipment
)I have a similar problem with my EVGA 750TI SC as well, but it only happens with quark as far as I've noticed - all of a sudden, low hash/clock, and no accepted shares.
I don't reboot though. If you're on windows, just go into device manager, disable, then re-enable that card. This reloads the drivers, and re-initializes the card. Should work for you as well.
Annoying as heck, though.
It means your overclock is too high. the 500MHz is some failsafe feature where the card goes after a crash
Mine does this even with stock clocks, and slightly underclocked. No problems with anything else, and can usually run +65/+300
the "disabling"/"enabling" never worked for me...
Powered 1x16
May 07, 2014, 10:09:38 AM
on a riser or directly in a pcie slot ?
the "disabling"/"enabling" never worked for me...
Mine are directly in a pcie slot.the "disabling"/"enabling" never worked for me...
I had the same with bitquark, but only the second card. The problem stopped, when I closed Evga Precision. Weird.
Maybe it would be an OC issue 
Maybe both, just OC making it happen much quicker. Jump to: