Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 513. (Read 3426976 times)
May 08, 2014, 03:05:08 AM
I believe there is no new build, just source updated for nist5?
May 08, 2014, 02:27:32 AM
there is a new algo NIST
https://bitcointalksearch.org/topic/anntac-talkcoin-official-thread-573998
from the post: Algorithms: NIST5: BLAKE - Grøstl - JH - Keccak - Skein
https://bitcointalksearch.org/topic/anntac-talkcoin-official-thread-573998
from the post: Algorithms: NIST5: BLAKE - Grøstl - JH - Keccak - Skein
and NIST5 is in ccMiner github version (no version number bump)
Unlike quarkCoin, there is probably not much of an nVidia advantage here because they've removed the divergence from Quark, and also the BMW algorithm.
If you really need to talk, then this coin is for you.
use -a nist5
this is very much untested. I will be solo'ing talkcoin for a while... allright. Works.
Code:
[2014-05-08 09:50:02] accepted: 1/1 (100.00%), 31014 khash/s (yay!!!)
Maturing of blocks takes >1000 blocks. Meh. Will be a while before I can start to jabber.
Christian
May 08, 2014, 12:23:23 AM
there is a new algo NIST
https://bitcointalksearch.org/topic/anntac-talkcoin-official-thread-573998
from the post: Algorithms: NIST5: BLAKE - Grøstl - JH - Keccak - Skein
https://bitcointalksearch.org/topic/anntac-talkcoin-official-thread-573998
from the post: Algorithms: NIST5: BLAKE - Grøstl - JH - Keccak - Skein
May 08, 2014, 12:00:01 AM
i hate nvidias ^^
well they dont like you much either+1 ...lmaol
May 07, 2014, 10:01:19 PM
i hate nvidias ^^
well they dont like you much either
May 07, 2014, 09:23:59 PM
i hate nvidias ^^
well they dont like you much either 
May 07, 2014, 09:16:10 PM
i hate nvidias ^^
May 07, 2014, 06:54:23 PM
Set -q and it will only show when you find a block or submit a share. So solomining you will only successful blocks
Well, that's wise, but now I cannot see my hashing speed. That a choice you have to made.However, the speed never change (from my experience), so once you know what is your speed for your cards, there isn't much point to continue to display it.
I think using ">> log" (or something like that) should give you the full logfile (in linux playing with tail and grep could help you to achieve what you want... but in windows I am totally clueless)
@nomad1109: Thanks for the BTQ, you quadrupled my balance.
[Your startup command] 2>&1 >> logfile.txt
That will redirect standard output (1) and error output (2) to a single logfile where it will append to the end of the file rather than overwrite what is there.
You won't see anything on the screen anymore, but you will log all the output to a file you can search through later.
There is a way to put the output to both, but it can require some more setup or specific needs on your end...
[Your startup command] 2>&1 | tee logfile.txt
Hope that helps.
Excellent explanation and great community. Thank you all!
May 07, 2014, 06:25:32 PM
Ive got 2 blocks submitted successfully by ccminer but rejected by the block chain. Just shows its status as a question mark. Never seen it on another coin but it says it wasnt accepted because another peer had a transactions around the same time
I had 4 of these with BTQ solo mining and finally the client froze up. When I reloaded it they were gone. Lost 6 hours on soloing that when we first got quark and I must have gotten myself on a fork somehow...
May 07, 2014, 04:06:40 PM
Ive got 2 blocks submitted successfully by ccminer but rejected by the block chain. Just shows its status as a question mark. Never seen it on another coin but it says it wasnt accepted because another peer had a transactions around the same time
May 07, 2014, 04:04:34 PM
Yeh ive found an orphan and a block in the last 12 hours. Be nice if it said it was an orphan then just saying it was rejected
listtransactions in the debug windows ( if it is rejected by cc/cudaminer, it usually doesn't make it up to the wallet) May 07, 2014, 03:45:13 PM
all versions of ccminer has crashed for me as well, I cant find the problem. I have an ASUS 750Ti OC. Mining HVC.
How much oc if any? I've only had hvc crash with too much oc.
The card is oc, I havent over clocked it any. I have had the crash problems for weeks now. Even some times I have to re-install the drivers of all 4 cards
Try changing your settings so Windows never turns the display off or goes to screen saver and then just turn the display off manually. I've fixed a similar issue by doing that before.
Also with ccminer I used to get random crashes often when the error reporting was enabled and on occasion a card would crash due to windows display recovery feature. I think on all of mine I just disabled the display recovery altogether but I don't remember. I think you can just set a different value for timeout which might work just as well. With it completely off, if you have a problem and it freezes, you'll have to physically restart it or hold down the power button to unfreeze it.
Here is something to get you started. I don't have time to look through this massive thread and find the other solutions we're found together the last few months(on my lunch break currently).
http://support.microsoft.com/kb/2665946
Hehe, thx for the info. I'll try those things, when the error windows pop up it some times freezes my whole miner and I have to restart and re-activate the cards. My screen never goes off or to screen saver so, that is not the problem.
May 07, 2014, 03:23:12 PM
all versions of ccminer has crashed for me as well, I cant find the problem. I have an ASUS 750Ti OC. Mining HVC.
How much oc if any? I've only had hvc crash with too much oc.
The card is oc, I havent over clocked it any. I have had the crash problems for weeks now. Even some times I have to re-install the drivers of all 4 cards
Try changing your settings so Windows never turns the display off or goes to screen saver and then just turn the display off manually. I've fixed a similar issue by doing that before.
Also with ccminer I used to get random crashes often when the error reporting was enabled and on occasion a card would crash due to windows display recovery feature. I think on all of mine I just disabled the display recovery altogether but I don't remember. I think you can just set a different value for timeout which might work just as well. With it completely off, if you have a problem and it freezes, you'll have to physically restart it or hold down the power button to unfreeze it.
Here is something to get you started. I don't have time to look through this massive thread and find the other solutions we're found together the last few months(on my lunch break currently).
http://support.microsoft.com/kb/2665946
May 07, 2014, 03:01:59 PM
Let the force be with you.
Wait, I thought C+C was the force!
MNR is now trading on cryptoaltex.
May 07, 2014, 02:58:03 PM
Damn you. Now i want to watch star wars
My comment I deleted, too offensive it was.
Let the force be with you.
lol...may the fork be with you...
May 07, 2014, 02:37:30 PM
Damn you. Now i want to watch star wars
My comment I deleted, too offensive it was.
Let the force be with you.
May 07, 2014, 02:29:35 PM
Lmao. So are you still mining bitquark christian or did you move elsewhere?
May 07, 2014, 02:28:06 PM
Damn you. Now i want to watch star wars
My comment I deleted, too offensive it was.
May 07, 2014, 02:27:06 PM
Damn you. Now i want to watch star wars
May 07, 2014, 02:24:28 PM
Yeh ive found an orphan and a block in the last 12 hours. Be nice if it said it was an orphan then just saying it was rejected
Jump to: