[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 685.

sin242

sr. member

Activity: 280

Merit: 250

Quote from: cbuchner1 on March 18, 2014, 12:45:22 PM

Quote from: sin242 on March 18, 2014, 12:01:28 PM

Is it possible to give CUDA miners the advantage first for these coins? As I see it,AMD cardholders have a massive advantage even if they get a few hours extra. I really appreciate all your work and I understand that that there exists neither an obligation nor a reward for you to do this,but it's just a request. Thanks again.

AMD miners have a massive advantage over CPU miners now, but none of these folks will get as many coins as I just collected over night (well unless their farms are massive and they let it run for quite a while)

By the way at 4 AM in the morning (CET) I had just finished the code and got my rigs up and running and I desperately wanted to get some sleep. At 7 AM I had to get up to get my son to daycare and afterwards I went to work. Now tell me when exactly you would have wanted me to release this Wink

Forfeiting my sleep is not an option.

Christian

I think Christian might be saying that his cuda version kicks some serious ass Cheesy

I can tell you the ati/sgminer blows for older cards. Even as high as 7950s don't seem to be very impressive. the older 5000 and 6000 series are low 20s at best.

lagur

full member

Activity: 199

Merit: 100

Patiently waiting to try out hvc on my 750ti rig Grin

bigjme

sr. member

Activity: 350

Merit: 250

Quote from: cbuchner1 on March 18, 2014, 12:45:22 PM

AMD miners have a massive advantage over CPU miners now, but none of these folks will get as many coins as I just collected over night (well unless their farms are massive and they let it run for quite a while)

By the way at 4 AM in the morning (CET) I had just finished the code and got my rigs up and running and I desperately wanted to get some sleep. At 7 AM I had to get up to get my son to daycare and afterwards go to work. Now tell me when exactly you would have wanted me to release this Wink

Forfeiting my sleep is not an option.

Christian

mobile broadband, laptop, car, all i can say!
jokes aside it good to see you talking in here again, i was beginning to think you had vanished with everyone else talking away xD

cbuchner1

hero member

Activity: 756

Merit: 502

Quote from: sin242 on March 18, 2014, 12:01:28 PM

Is it possible to give CUDA miners the advantage first for these coins? As I see it,AMD cardholders have a massive advantage even if they get a few hours extra. I really appreciate all your work and I understand that that there exists neither an obligation nor a reward for you to do this,but it's just a request. Thanks again.

AMD miners have a massive advantage over CPU miners now, but none of these folks will get as many coins as I just collected over night (well unless their farms are massive and they let it run for quite a while)

By the way at 4 AM in the morning (CET) I had just finished the code and got my rigs up and running and I desperately wanted to get some sleep. At 7 AM I had to get up to get my son to daycare and afterwards I went to work. Now tell me when exactly you would have wanted me to release this Wink

Forfeiting my sleep is not an option.

Heavycoin could have been released earlier, but even with the first mover advantage I (presumably) had over the course of several days my profits were small: 0.5 BTC overall. So not worth it.

Christian

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: sin242 on March 18, 2014, 12:01:28 PM

Quote from: atc1 on March 18, 2014, 11:48:25 AM

Quote from: cbuchner1 on March 18, 2014, 11:11:14 AM

A CUDA based heavycoin and fuguecoin miner will be released some time tonight (CET), as both of these coins are AMD GPU mineable now.

This is not the cudaminer project, so it doesn't haveall the bells and whistles like autotune or automatic GPU architecture selection.

It was fun to hold 50% of the fuguecoin network's hash rate with a small pool of nVidia cards. But fun seldom lasts forever Wink

Christian

Is it possible to give CUDA miners the advantage first for these coins? As I see it,AMD cardholders have a massive advantage even if they get a few hours extra. I really appreciate all your work and I understand that that there exists neither an obligation nor a reward for you to do this,but it's just a request. Thanks again.

Maxcoin...

Oh fond memories...

I don't know, I think it gives us expectations which most of time cannot be reached...

sin242

sr. member

Activity: 280

Merit: 250

Quote from: atc1 on March 18, 2014, 11:48:25 AM

Quote from: cbuchner1 on March 18, 2014, 11:11:14 AM

A CUDA based heavycoin and fuguecoin miner will be released some time tonight (CET), as both of these coins are AMD GPU mineable now.

This is not the cudaminer project, so it doesn't haveall the bells and whistles like autotune or automatic GPU architecture selection.

It was fun to hold 50% of the fuguecoin network's hash rate with a small pool of nVidia cards. But fun seldom lasts forever Wink

Christian

Is it possible to give CUDA miners the advantage first for these coins? As I see it,AMD cardholders have a massive advantage even if they get a few hours extra. I really appreciate all your work and I understand that that there exists neither an obligation nor a reward for you to do this,but it's just a request. Thanks again.

Maxcoin...

Oh fond memories...

atc1

sr. member

Activity: 308

Merit: 250

Quote from: cbuchner1 on March 18, 2014, 11:11:14 AM

A CUDA based heavycoin and fuguecoin miner will be released some time tonight (CET), as both of these coins are AMD GPU mineable now.

This is not the cudaminer project, so it doesn't haveall the bells and whistles like autotune or automatic GPU architecture selection.

It was fun to hold 50% of the fuguecoin network's hash rate with a small pool of nVidia cards. But fun seldom lasts forever Wink

Christian

Is it possible to give CUDA miners the advantage first for these coins? As I see it,AMD cardholders have a massive advantage even if they get a few hours extra. I really appreciate all your work and I understand that that there exists neither an obligation nor a reward for you to do this,but it's just a request. Thanks again.

jack80

sr. member

Activity: 434

Merit: 250

Quote from: cbuchner1 on March 18, 2014, 11:11:14 AM

A CUDA based heavycoin and fuguecoin miner will be released some time tonight (CET), as both of these coins are AMD GPU mineable now.

This is not the cudaminer project, so it doesn't haveall the bells and whistles like autotune or automatic GPU architecture selection.

It was fun to hold 50% of the fuguecoin network's hash rate with a small pool of nVidia cards. But fun seldom lasts forever Wink

Christian

I LOVE YOU!!!

.

myagui

legendary

Activity: 1154

Merit: 1001

Quote from: cbuchner1 on March 18, 2014, 11:11:14 AM

A CUDA based heavycoin and fuguecoin miner will be released some time tonight (CET), as both of these coins are AMD GPU mineable now.

This is not the cudaminer project, so it doesn't haveall the bells and whistles like autotune or automatic GPU architecture selection.

It was fun to hold 50% of the fuguecoin network's hash rate with a small pool of nVidia cards. But fun seldom lasts forever Wink

Christian

Haha! Many coins then Christian?
I got 400 with my measly CPU, but granted I was *there* at difficulty ~0 (meaning, launch time)

Cheers,
~ Myagui

cbuchner1

hero member

Activity: 756

Merit: 502

A CUDA based heavycoin and fuguecoin miner will be released some time tonight (CET), as both of these coins are AMD GPU mineable now.

This is not the cudaminer project, so it doesn't haveall the bells and whistles like autotune or automatic GPU architecture selection.

It was fun to hold 50% of the fuguecoin network's hash rate with a small pool of nVidia cards. But fun seldom lasts forever Wink

Christian

DemosMirak

full member

Activity: 146

Merit: 100

Quote from: cvax on March 18, 2014, 03:42:25 AM

Quote from: DemosMirak on March 18, 2014, 03:23:35 AM

Guys, I'm thinking of hooking my old pc up for some mining, but I don't have a spare screen, nor do I have actually room on my desk to place one. So I was thinking of software to remote control your desktop, and I am wondering if any of you have experience with that regarding mining. If so, how did it work out?

Also, can I apply an over/underclock during mining, or should I halt the miner first?

You can apply over/underclock during mining.
You would likely need to use a monitor to get everything running, but for management you can use something like TightVNC and connect into your computer. It might be a little slow trying to move your mouse around and control things, but as long as the computer hasn't crashed it'll work just fine.

Quote from: antonio8 on March 18, 2014, 10:15:07 AM

Quote from: DemosMirak on March 18, 2014, 03:23:35 AM

Guys, I'm thinking of hooking my old pc up for some mining, but I don't have a spare screen, nor do I have actually room on my desk to place one. So I was thinking of software to remote control your desktop, and I am wondering if any of you have experience with that regarding mining. If so, how did it work out?

Also, can I apply an over/underclock during mining, or should I halt the miner first?

I use Team Veiwer to remote control 3 of my rigs with no monitor. I made dummy plugs for them.

Of course I had to hook them up to the monitor to get everything installed but after that it works fine. I can remote control them from my phone or tablet or my main rig when I am at home since they are spread out over the house.

Thanks guys. Now I just need to find an Ethernet cable long enough to connect the rig to the network,

ManiacMiner

full member

Activity: 145

Merit: 101

Do not need exemplify Ypool, which was created for mining on CPU and cloud mining. Is a different story.

antonio8

legendary

Activity: 1400

Merit: 1000

Quote from: DemosMirak on March 18, 2014, 03:23:35 AM

Guys, I'm thinking of hooking my old pc up for some mining, but I don't have a spare screen, nor do I have actually room on my desk to place one. So I was thinking of software to remote control your desktop, and I am wondering if any of you have experience with that regarding mining. If so, how did it work out?

Also, can I apply an over/underclock during mining, or should I halt the miner first?

I use Team Veiwer to remote control 3 of my rigs with no monitor. I made dummy plugs for them.

Of course I had to hook them up to the monitor to get everything installed but after that it works fine. I can remote control them from my phone or tablet or my main rig when I am at home since they are spread out over the house.

cvax

member

Activity: 84

Merit: 10

Quote from: DemosMirak on March 18, 2014, 03:23:35 AM

Guys, I'm thinking of hooking my old pc up for some mining, but I don't have a spare screen, nor do I have actually room on my desk to place one. So I was thinking of software to remote control your desktop, and I am wondering if any of you have experience with that regarding mining. If so, how did it work out?

Also, can I apply an over/underclock during mining, or should I halt the miner first?

You can apply over/underclock during mining.
You would likely need to use a monitor to get everything running, but for management you can use something like TightVNC and connect into your computer. It might be a little slow trying to move your mouse around and control things, but as long as the computer hasn't crashed it'll work just fine.

DemosMirak

full member

Activity: 146

Merit: 100

Guys, I'm thinking of hooking my old pc up for some mining, but I don't have a spare screen, nor do I have actually room on my desk to place one. So I was thinking of software to remote control your desktop, and I am wondering if any of you have experience with that regarding mining. If so, how did it work out?

Also, can I apply an over/underclock during mining, or should I halt the miner first?

sambiohazard

hero member

Activity: 840

Merit: 1000

I am not saying that he should not release until donation target is hit. He always releases when a version is ready but this will make donations official and I am sure this will increase the donations.

subotai

newbie

Activity: 9

Merit: 0

nope , this will only make people to replace with AMD video cards and use free OpenCL software.
4 years ago when BTC cost $1 had one paid CUDA miner , against him there were 4 free OpenCL miner with much much high speed.This not working.

sambiohazard

hero member

Activity: 840

Merit: 1000

hey all I posted this suggestion a few days back and I think this most transparent way for Christian and the community to keep track of everything

Maybe christian can set a target donation and announce a BTC address. If target is reached he can release the next version. He can also set may be max/min donation amount so that everyone can give only fair share of the whole amount. This can be done through something like https://moolah.io
Anyone can see donation amount on the blockchain. I am sure making this official will bring in lots of donations. For special releases people can pledge a % of what they make to Christian which they do even now I guess.

This will also give more exposure to christian and cudaminer.

DougB62

hero member

Activity: 672

Merit: 500

Banned: For Your Protection

Quote from: mhps on March 17, 2014, 08:39:07 PM

Quote from: mhps on March 16, 2014, 11:44:29 PM

Quote from: Bombadil on March 16, 2014, 10:34:36 PM

I'm using this for my bat for my gtx760.

Code:

:start
cudaminer.exe -o STRATUM -O LOGIN -H 1 -i 0 -C 1 -l K6x32 --time-limit 3600
goto start

It kills the cudaminer process after an hour, and restarts the loop. I was getting many different errors with some stratums after 2 hours or so, no problems ever since I've been using this loop.

Thanks Bombadil. I will try your script with "nvidia-smi >> log" to record how the card has been working.

It turns out not to be a good idea for this case because when the miner is restarted it has a good chance (like 2 in 3 times) to have the error right in the start. So auto-restarting it every hour when the miner still runs fine means getting into trouble in 2/3 certainty every hour.

I wonder if putting in a delay before re-launching might help. It may be that the restart being so fast causes things to "get stuck" in memory, causing errant data to be introduced into the new instance. It may also cause havoc with the clocks.

mhps

hero member

Activity: 516

Merit: 500

CAT.EX Exchange

Quote from: mhps on March 16, 2014, 11:44:29 PM

Quote from: Bombadil on March 16, 2014, 10:34:36 PM

I'm using this for my bat for my gtx760.

Code:

:start
cudaminer.exe  -o STRATUM -O LOGIN -H 1 -i 0 -C 1 -l K6x32 --time-limit 3600
goto start

It kills the cudaminer process after an hour, and restarts the loop. I was getting many different errors with some stratums after 2 hours or so, no problems ever since I've been using this loop.

Thanks Bombadil. I will try your script with "nvidia-smi >> log" to record how the card has been working.

It turns out not to be a good idea for this case because when the miner is restarted it has a good chance (like 2 in 3 times) to have the error right in the start. So auto-restarting it every hour when the miner still runs fine means getting into trouble in 2/3 certainty every hour.

Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 685. (Read 3426922 times)