Topic: [ANN] CureCoin 2.0 is live - Mandatory Update is available now - DEC 2018 - page 155. (Read 696254 times)
May 22, 2014, 03:59:10 PM
i use 3 cores for mining another coin and I only mining CureCoin with 1 graphic card. If I monitor the CPU and it does not hit 100% - Can i safely say the CPU is not affecting my PPD?
May 22, 2014, 03:21:08 PM
For some reason today,after uploading the last 2 WUs the F@H client started to act strange so I re-booted a couple times and I now have 4 extra WUs waiting in the queue,never had that before,only the 2 I was working on?
My client has been having problems uploading completed WUs for the past two nights that I've noticed. Sits with the GPU idling 99% complete , ETA 4 seconds for hours. It's seriously affecting my pay. Rebooting does not seem to help. Is it possible this is a network attack by some greedy, freeloading fawk?
May 22, 2014, 03:20:11 PM
i need help, newbie here...
i have 6 x GPU R9 280x (4x R9 280x TOXIC + 2x R9 280x MSI Gaming OC) + CPU i7 4770k + 8 GB DDR3 = 400.000 PPD (motherboard is ASRock H81 BTC Pro)
I tried all this steps before:
i have no clue what else i can try... its suppose the TOXICs should reach 147.000 PPD and the MSIs 110.000 PPD, but im barely reaching 400.000on all 6 x GPUs
i have 6 x GPU R9 280x (4x R9 280x TOXIC + 2x R9 280x MSI Gaming OC) + CPU i7 4770k + 8 GB DDR3 = 400.000 PPD (motherboard is ASRock H81 BTC Pro)
I tried all this steps before:
- tried with catalyst 14.4 and catalyst 13.12 modded versions
- switched motherboard BIOS PCI-E from Gen2 to Gen1
- i let it fold for over an hour to see stabilized numbers on PPD
- TPF show a range of 6 min - 8 min on all GPUs
- CPU folding is paused
- TOXIC clocks are default (1150/1600) and MSI clock default (1020/1500)
i have no clue what else i can try... its suppose the TOXICs should reach 147.000 PPD and the MSIs 110.000 PPD, but im barely reaching 400.000on all 6 x GPUs
Folding speed can be changed quite a bit depending on what project was assigned to you, what project # are they running? If they are 13000 WUs, then 8 minutes would be around 130000PPD.
subir imagenes gratis
hosting imagenes
sube fotos
sube imagenes
subir imagenes
subir imagenes
Hmm, looks like it is underestimating your PPD for some reason. What's the CPU load on that box?
May 22, 2014, 03:17:43 PM
Starting to go up: https://poloniex.com/exchange/btc_cure
Let's get up to 0.01 BTC in the next few weeks!
Let's get up to 0.01 BTC in the next few weeks!
It looks to me like it's still down from where it was even yesterday...
On a good note, this means you can still buy in cheap before they do go up.
May 22, 2014, 03:09:52 PM
i need help, newbie here...
i have 6 x GPU R9 280x (4x R9 280x TOXIC + 2x R9 280x MSI Gaming OC) + CPU i7 4770k + 8 GB DDR3 = 400.000 PPD (motherboard is ASRock H81 BTC Pro)
I tried all this steps before:
i have no clue what else i can try... its suppose the TOXICs should reach 147.000 PPD and the MSIs 110.000 PPD, but im barely reaching 400.000on all 6 x GPUs
i have 6 x GPU R9 280x (4x R9 280x TOXIC + 2x R9 280x MSI Gaming OC) + CPU i7 4770k + 8 GB DDR3 = 400.000 PPD (motherboard is ASRock H81 BTC Pro)
I tried all this steps before:
- tried with catalyst 14.4 and catalyst 13.12 modded versions
- switched motherboard BIOS PCI-E from Gen2 to Gen1
- i let it fold for over an hour to see stabilized numbers on PPD
- TPF show a range of 6 min - 8 min on all GPUs
- CPU folding is paused
- TOXIC clocks are default (1150/1600) and MSI clock default (1020/1500)
i have no clue what else i can try... its suppose the TOXICs should reach 147.000 PPD and the MSIs 110.000 PPD, but im barely reaching 400.000on all 6 x GPUs
Folding speed can be changed quite a bit depending on what project was assigned to you, what project # are they running? If they are 13000 WUs, then 8 minutes would be around 130000PPD.
subir imagenes gratis
hosting imagenes
sube fotos
sube imagenes
subir imagenes
subir imagenes
May 22, 2014, 02:54:07 PM
i need help, newbie here...
i have 6 x GPU R9 280x (4x R9 280x TOXIC + 2x R9 280x MSI Gaming OC) + CPU i7 4770k + 8 GB DDR3 = 400.000 PPD (motherboard is ASRock H81 BTC Pro)
I tried all this steps before:
i have no clue what else i can try... its suppose the TOXICs should reach 147.000 PPD and the MSIs 110.000 PPD, but im barely reaching 400.000on all 6 x GPUs
i have 6 x GPU R9 280x (4x R9 280x TOXIC + 2x R9 280x MSI Gaming OC) + CPU i7 4770k + 8 GB DDR3 = 400.000 PPD (motherboard is ASRock H81 BTC Pro)
I tried all this steps before:
- tried with catalyst 14.4 and catalyst 13.12 modded versions
- switched motherboard BIOS PCI-E from Gen2 to Gen1
- i let it fold for over an hour to see stabilized numbers on PPD
- TPF show a range of 6 min - 8 min on all GPUs
- CPU folding is paused
- TOXIC clocks are default (1150/1600) and MSI clock default (1020/1500)
i have no clue what else i can try... its suppose the TOXICs should reach 147.000 PPD and the MSIs 110.000 PPD, but im barely reaching 400.000on all 6 x GPUs
Folding speed can be changed quite a bit depending on what project was assigned to you, what project # are they running? If they are 13000 WUs, then 8 minutes would be around 130000PPD.
May 22, 2014, 02:38:00 PM
Starting to go up: https://poloniex.com/exchange/btc_cure
Let's get up to 0.01 BTC in the next few weeks!
Let's get up to 0.01 BTC in the next few weeks!
May 22, 2014, 02:28:24 PM
Vote for Curecoin on coinpayments - https://www.coinpayments.net/vote I just did this, it's really worth doing!
just voted for CUREcoin
May 22, 2014, 01:54:41 PM
Vote for Curecoin on coinpayments - https://www.coinpayments.net/vote I just did this, it's really worth doing!
May 22, 2014, 01:34:31 PM
I have 4 7950's and have been getting abysmal payouts. I only have a dual core processor so I would assume I'm bottle necking BIG TIME, would it be possible to mine with 2 GPU's and Fold with the other two without bottle necking my CPU?
It depends how much CPU the mining with 2 uses. If it uses for example 40% of your CPU then you could only fold with one. I would just upgrade my CPU to quad core.
Thanks a lot man! What would you estimate my PPD to be with a quad core and 4 7950's? Like I said above, I'm only getting ~109K PPD now.
I'm currently running a single 7950 and getting 110k PPD. However, I have also done 10 work units which gives me the passkey. If you set it up right I would estimate 450k PPD could be achieved w/ a passkey. If I were to go buy a new AMD Cpu I would make sure to get a 6 core if you have the socket but for Intel a 4 core will work. (i5)
Definitely need a new CPU anything over 1 card and its at 100% CPU usage on newest 14.4 Drivers. Running a standard LTC mining machine from early 2013 with a Sempron Processor.
I should have the "passkey" I've submitted well over 10 WU.
http://fah-web2.stanford.edu/cgi-bin/main.py?qtype=userpage&username=cscrypto
Can you please shed some light on what the "passkey" is and what it does?
It is bonus points that you get for each work unit you complete but you only start getting bonus points after completing 10 work units and their noticeable.
Ah, okay. Thanks,
. Only 1.5 days until I can start folding! May 22, 2014, 01:31:45 PM
I have 4 7950's and have been getting abysmal payouts. I only have a dual core processor so I would assume I'm bottle necking BIG TIME, would it be possible to mine with 2 GPU's and Fold with the other two without bottle necking my CPU?
It depends how much CPU the mining with 2 uses. If it uses for example 40% of your CPU then you could only fold with one. I would just upgrade my CPU to quad core.
Thanks a lot man! What would you estimate my PPD to be with a quad core and 4 7950's? Like I said above, I'm only getting ~109K PPD now.
I'm currently running a single 7950 and getting 110k PPD. However, I have also done 10 work units which gives me the passkey. If you set it up right I would estimate 450k PPD could be achieved w/ a passkey. If I were to go buy a new AMD Cpu I would make sure to get a 6 core if you have the socket but for Intel a 4 core will work. (i5)
Definitely need a new CPU anything over 1 card and its at 100% CPU usage on newest 14.4 Drivers. Running a standard LTC mining machine from early 2013 with a Sempron Processor.
I should have the "passkey" I've submitted well over 10 WU.
http://fah-web2.stanford.edu/cgi-bin/main.py?qtype=userpage&username=cscrypto
Can you please shed some light on what the "passkey" is and what it does?
It is bonus points that you get for each work unit you complete but you only start getting bonus points after completing 10 work units and their noticeable.
May 22, 2014, 01:30:43 PM
I have 4 7950's and have been getting abysmal payouts. I only have a dual core processor so I would assume I'm bottle necking BIG TIME, would it be possible to mine with 2 GPU's and Fold with the other two without bottle necking my CPU?
It depends how much CPU the mining with 2 uses. If it uses for example 40% of your CPU then you could only fold with one. I would just upgrade my CPU to quad core.
Thanks a lot man! What would you estimate my PPD to be with a quad core and 4 7950's? Like I said above, I'm only getting ~109K PPD now.
I'm currently running a single 7950 and getting 110k PPD. However, I have also done 10 work units which gives me the passkey. If you set it up right I would estimate 450k PPD could be achieved w/ a passkey. If I were to go buy a new AMD Cpu I would make sure to get a 6 core if you have the socket but for Intel a 4 core will work. (i5)
Definitely need a new CPU anything over 1 card and its at 100% CPU usage on newest 14.4 Drivers. Running a standard LTC mining machine from early 2013 with a Sempron Processor.
I should have the "passkey" I've submitted well over 10 WU.
http://fah-web2.stanford.edu/cgi-bin/main.py?qtype=userpage&username=cscrypto
Can you please shed some light on what the "passkey" is and what it does?
May 22, 2014, 01:10:54 PM
Don't forget to vote!
Curecoin has been added to the voting list on coinpayments.net. Vote for Curecoin on the following page:
https://www.coinpayments.net/vote
1 vote allowed per person for the small price of BTC0.001! All the BTC collected will be donated to charity, so there is no excuse not to vote.
It is time to get this thing moving and get some active stores!
https://www.coinpayments.net/vote
1 vote allowed per person for the small price of BTC0.001! All the BTC collected will be donated to charity, so there is no excuse not to vote.
It is time to get this thing moving and get some active stores!
May 22, 2014, 12:51:57 PM
I have 4 7950's and have been getting abysmal payouts. I only have a dual core processor so I would assume I'm bottle necking BIG TIME, would it be possible to mine with 2 GPU's and Fold with the other two without bottle necking my CPU?
It depends how much CPU the mining with 2 uses. If it uses for example 40% of your CPU then you could only fold with one. I would just upgrade my CPU to quad core.
Thanks a lot man! What would you estimate my PPD to be with a quad core and 4 7950's? Like I said above, I'm only getting ~109K PPD now.
I'm currently running a single 7950 and getting 110k PPD. However, I have also done 10 work units which gives me the passkey. If you set it up right I would estimate 450k PPD could be achieved w/ a passkey. If I were to go buy a new AMD Cpu I would make sure to get a 6 core if you have the socket but for Intel a 4 core will work. (i5)
Definitely need a new CPU anything over 1 card and its at 100% CPU usage on newest 14.4 Drivers. Running a standard LTC mining machine from early 2013 with a Sempron Processor.
I should have the "passkey" I've submitted well over 10 WU.
http://fah-web2.stanford.edu/cgi-bin/main.py?qtype=userpage&username=cscrypto
May 22, 2014, 12:43:56 PM
i need help, newbie here...
i have 6 x GPU R9 280x (4x R9 280x TOXIC + 2x R9 280x MSI Gaming OC) + CPU i7 4770k + 8 GB DDR3 = 400.000 PPD (motherboard is ASRock H81 BTC Pro)
I tried all this steps before:
i have no clue what else i can try... its suppose the TOXICs should reach 147.000 PPD and the MSIs 110.000 PPD, but im barely reaching 400.000on all 6 x GPUs
i have 6 x GPU R9 280x (4x R9 280x TOXIC + 2x R9 280x MSI Gaming OC) + CPU i7 4770k + 8 GB DDR3 = 400.000 PPD (motherboard is ASRock H81 BTC Pro)
I tried all this steps before:
- tried with catalyst 14.4 and catalyst 13.12 modded versions
- switched motherboard BIOS PCI-E from Gen2 to Gen1
- i let it fold for over an hour to see stabilized numbers on PPD
- TPF show a range of 6 min - 8 min on all GPUs
- CPU folding is paused
- TOXIC clocks are default (1150/1600) and MSI clock default (1020/1500)
i have no clue what else i can try... its suppose the TOXICs should reach 147.000 PPD and the MSIs 110.000 PPD, but im barely reaching 400.000on all 6 x GPUs
May 22, 2014, 12:36:27 PM
Hi
3 Finnished WU's are not upploading. It's now on it's 11 attempt.
This worked before.
The other 2 GPU's are working fine with new WU's.
Does anyone have a fix on this?
3 Finnished WU's are not upploading. It's now on it's 11 attempt.
This worked before.
The other 2 GPU's are working fine with new WU's.
Does anyone have a fix on this?
Have you tried pausing folding on those cards, downclocking them a bit (50 mhz or so) and then folding again?
May 22, 2014, 12:34:21 PM
Hi
3 Finnished WU's are not upploading. It's now on it's 11 attempt.
This worked before.
The other 2 GPU's are working fine with new WU's.
Does anyone have a fix on this?
3 Finnished WU's are not upploading. It's now on it's 11 attempt.
This worked before.
The other 2 GPU's are working fine with new WU's.
Does anyone have a fix on this?
May 22, 2014, 12:27:49 PM
For some reason today,after uploading the last 2 WUs the F@H client started to act strange so I re-booted a couple times and I now have 4 extra WUs waiting in the queue,never had that before,only the 2 I was working on?
May 22, 2014, 12:20:04 PM
does anybody knows how many curecoins can one 280x earn per day?
A 280x does about 120K PPD, which is currently approx 4.5 cure.WOW! I've only been able to manage 120k with four 7950's. I NEED a new CPU!
Are you using 14.4 drivers? All my AMD rigs use G1620 Celerons, and ran like crap with 13.12 while folding because the CPU was pegged at 100% all the time. With 14.4, it'll peg at startup, then once it's actually folding it runs fine, about 23% CPU usage on a 4x 280x rig, for instance.
I honestly think I'm still on the 12.8 Drivers. If it ain't broke don't fix it right? Mining scrypt for months on end. I'll give this a shot too. Thanks Croak.
EDIT: Yup, 12.8, Updating now.
Fair point with it not being broke. However, newer folding drivers are more optimized to work with folding @ home.
May 22, 2014, 12:19:08 PM
I have 4 7950's and have been getting abysmal payouts. I only have a dual core processor so I would assume I'm bottle necking BIG TIME, would it be possible to mine with 2 GPU's and Fold with the other two without bottle necking my CPU?
It depends how much CPU the mining with 2 uses. If it uses for example 40% of your CPU then you could only fold with one. I would just upgrade my CPU to quad core.
Thanks a lot man! What would you estimate my PPD to be with a quad core and 4 7950's? Like I said above, I'm only getting ~109K PPD now.
I'm currently running a single 7950 and getting 110k PPD. However, I have also done 10 work units which gives me the passkey. If you set it up right I would estimate 450k PPD could be achieved w/ a passkey. If I were to go buy a new AMD Cpu I would make sure to get a 6 core if you have the socket but for Intel a 4 core will work. (i5)
Jump to: