Topic: [ANN] Datacoin - Censorship-Free Data Storage - page 53. (Read 66642 times)

Hi Everyone,

And here's the link for upvotes and comments --- the comments are extremely important!
https://nextexchange.featureupvote.com/suggestions/3099/datacoin-dtc

Kind Regards,
DatacoinMiner

Hi NYCbelive,

I've had the best luck with Chicago's version of Datacoin -- I've installed it on different Windows machines and networks, it doesn't require adding nodes, it will find them:
https://github.com/CoiningPress/datacoin/releases

Regards,
DatacoinMiner

Hello, i got the datacoin-qt wallet, but my wallet is not syncing..
and i have added the nodes. what is wrong?

Voting on Next Exchange

Due to the tireless efforts of the Datacoin community we are now lying TENTH (10th) on the Voting list for the Next Exchange, with more than 1200 votes.  I really cannot see how they can refuse to list us, especially since we are the first of the coins that have not been listed.

Today (Friday) the Next developers normally take suggestions on the Next Exchange Telegram channel to discuss which coins are to be listed.  EVERYBODY please log into that telegram channel and make the case for Datacoin.

Frustratingly, I have been banned again by the bot that is active on the channel.  This piece of software seems to be malfunctioning, because I had no trouble getting unbanned the previous time.

I suspect that part of the delay in listing may be related to the length of time it takes for the Datacoin blockchain to sync.  If you do encounter the Next developers and they talk about this issue please mention our blockchain bootstrap and post in this forum.

Thank you everybody for your efforts, including the comments which are showing up again.  Volumes on the other two Datacoin exchanges (BTCPOP and the Freiexchange) remain gratifying, and several people report that mining Datacoin is profitable again!

Cheers
-extro

Hi extro24,


    I have no idea who controls it. Also, after looking through the repository's log - the committer did not leave an email address.

Best Regards,
-Chicago

Hi All

Does anyone know who controls the datacoin-project account at Github?  Seems like a nice handle where we could park our updates.

I have tried to get the co-operation of the owner of the datacoin account, but with no success.

-extro

Links updated, there was www. missing in front of them
for example:

http://www.graymines.net/miners/datacoin/dtcclient_v10.1beta.zip

Hi nanadipa,

Hmmm, you're right, I'm unable to download the software too.
Re-installing is a good logical next step.

Let's loop in MarcusDE.

Hi MarcusDE,

Can you check your website and help us by seeing what may be causing the mining software to not download?

Thank you for your time and services!

Kind Regards,
DatacoinMiner

C:\Windows\system32>ping dtc.graymines.net -t

正在 Ping home.graymines.net [89.76.251.96] 具有 32 字节的数据:
来自 89.76.251.96 的回复: 字节=32 时间=374ms TTL=40
来自 89.76.251.96 的回复: 字节=32 时间=374ms TTL=40
来自 89.76.251.96 的回复: 字节=32 时间=378ms TTL=40
来自 89.76.251.96 的回复: 字节=32 时间=378ms TTL=39
来自 89.76.251.96 的回复: 字节=32 时间=372ms TTL=40
来自 89.76.251.96 的回复: 字节=32 时间=375ms TTL=39
来自 89.76.251.96 的回复: 字节=32 时间=374ms TTL=40
来自 89.76.251.96 的回复: 字节=32 时间=372ms TTL=40
来自 89.76.251.96 的回复: 字节=32 时间=374ms TTL=41
来自 89.76.251.96 的回复: 字节=32 时间=378ms TTL=41

89.76.251.96 的 Ping 统计信息:
    数据包: 已发送 = 10，已接收 = 10，丢失 = 0 (0% 丢失)，
往返行程的估计时间(以毫秒为单位):
    最短 = 372ms，最长 = 378ms，平均 = 374ms

-----------------------------------------------------------
Ping is good .

**  dtcclient_v9.4.1/xpmclient.exe  7.23 MB (7,588,695 字节)

plesae sent me the miner software your are working, 

cause I can't download from http://graymines.net/miners/datacoin/dtcclient_***,

I searched somewhere from google ,maybe the software I download is the problem

my Email: [email protected]

Thanks

Port 4444 or 4777?

Hi nanadipa,

How peculiar huh?

I see you can resolved DNS, but have you tried something as simple as a ping test from your computer?
ping 89.76.251.96

Everything else checks out that I can see.
I run 290s (very similar cards) on roughly the same setup you have, and I have no errors.
The only difference is that I'm running CCC 15.7.1, not sure if that makes that much of a difference.
I can only think there is some kind of network issue occurring?

Kind Regards,
DatacoinMiner

Microsoft .NET Framework 4
Microsoft .NET Framework 4.5.2
Microsoft .NET Framework 4.6.1

update to newest

https://s1.ax1x.com/2018/02/03/9esqnH.jpg" alt="9esqnH.jpg" border="0" />
https://s1.ax1x.com/2018/02/03/9esqnH.jpg
------------------------------------------------
dtcclient_v9.4.1
config.txt
-----------------------------------------------
# pool website: http://dtc.graymines.net

server = "dtc.graymines.net";
port = "4444";

# Your XPM payout address
# address = "***************************";
address = "D***************************";

# You can give this machine a custom name
# Computer name is used as default
name = "custom_name_1";

# Platform: nvidia, amd
platform = "amd";

# GPU crash handling (properly untested feature):
# 0 - do nothing
# 1 - close miner application
# 2 - reboot system (need superuser rights)
onCrash = "0";

# - Valid cpuload range: 0 to 4
# - More than 2 does not make sense
# - You can use 0 for really slow CPUs
cpuload = "0";

# Target Cunningham chain length, default = 10
target = "9";

# Sieve size in stripes (1 stripe = 16384 bits), default = 420
# Big sieve size gives more candidates with less prime probability
sieveSize = "210";

# Weave depth (primes number count using by sieve), default = 40960
# Big weave depth increases prime probability, but sieve generate less candidates
weaveDepth = "40960";

# Sieve layers number, optimal value is target*2, default = 20
width = "20";

# - The following settings have one entry per GPU
# - If you have more than 4 just add more entries or leave it as is to use defaults
# - All entries must be separated by commas and set between double quotes

# 0 = don't use device
# 1 = use device
devices =        ["1", "1", "1", "1", "1"];

# Primorial 13 is optimal
sieveprimorial = ["13", "13", "13", "13", "13"];

# sieves per round value, default = 5
sievePerRound = ["5", "5", "5", "5", "5"];

# -1 means don't change
corefreq =       ["-1", "-1", "-1", "-1", "-1"];
memfreq =        ["-1", "-1", "-1", "-1", "-1"];
powertune =      ["-1", "-1", "-1", "-1", "-1"];
fanspeed =       ["-1", "-1", "-1", "-1", "-1"];

NsGpuCNMiner.exe

赏屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯突
?        Claymore's CryptoNote AMD GPU Miner v10.2 Beta         ?
韧屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯图

Wrong Monero wallet address, "-allpools 1" option will be enabled automatically, read Readme for details.
XMR: 1 pool is specified
Main Monero pool is dtc.graymines.net:4444
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 2
GPU #0: Hawaii, 8192 MB available, 44 compute units
GPU #0 recognized as Radeon 390X
GPU #1: Pitcairn, 3072 MB available, 16 compute units
POOL version
GPU #0 algorithm ASM, -h 1376, -dmem 1 (Memory used: 5778MB)
GPU #1 algorithm ASM, -h 512, -dmem 1 (Memory used: 2150MB)
Total cards: 2
XMR: Stratum - connecting to 'dtc.graymines.net' <89.76.251.96> port 4444 (unsecure)
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

XMR: Stratum - Cannot connect to dtc.graymines.net:4444
XMR: Stratum - Failed to connect, retry in 20 sec...

-------------------
this miner can't direct mine Datacoin, I don't know how to try then ...

if I use NsGpuCNMiner.exe to mine XMR

-------------------------
C:\Xrp-Data\Claymore CryptoNote AMD GPU Miner v10.2 Beta - POOL>NsGpuCNMiner.exe

赏屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯突
?        Claymore's CryptoNote AMD GPU Miner v10.2 Beta         ?
韧屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯屯图

XMR: 1 pool is specified
Main Monero pool is xmr.f2pool.com:13531
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 2
GPU #0: Hawaii, 8192 MB available, 44 compute units
GPU #0 recognized as Radeon 390X
GPU #1: Pitcairn, 3072 MB available, 16 compute units
POOL version
GPU #0 algorithm ASM, -h 1376, -dmem 1 (Memory used: 5778MB)
GPU #1 algorithm ASM, -h 512, -dmem 1 (Memory used: 2150MB)
Total cards: 2
XMR: Stratum - connecting to 'xmr.f2pool.com' <116.211.169.162> port 13531 (unsecure)
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

XMR: Stratum - Connected (xmr.f2pool.com:13531) (unsecure)
GPU1 found incorrect share. If you see this message often, make sure you that you did not overclock it too much, also try to reduce "-h" value.
XMR: 02/03/18-21:03:00 - SHARE FOUND - (GPU 0)
Share accepted (141 ms)!
XMR: 02/03/18-21:03:17 - SHARE FOUND - (GPU 1)
Share accepted (156 ms)!
GPU1 found incorrect share. If you see this message often, make sure you that you did not overclock it too much, also try to reduce "-h" value.
XMR: 02/03/18-21:03:19 - SHARE FOUND - (GPU 1)
Share accepted (109 ms)!
XMR: 02/03/18-21:03:23 - SHARE FOUND - (GPU 0)
Share accepted (110 ms)!
XMR: 02/03/18-21:03:36 - SHARE FOUND - (GPU 0)
Share accepted (125 ms)!
XMR: 02/03/18-21:03:38 - SHARE FOUND - (GPU 1)
Share accepted (94 ms)!
XMR: 02/03/18-21:03:39 - SHARE FOUND - (GPU 0)
Share accepted (125 ms)!
XMR: 02/03/18-21:03:47 - SHARE FOUND - (GPU 1)
Share accepted (109 ms)!
XMR: 02/03/18-21:03:52 - SHARE FOUND - (GPU 0)
Share accepted (312 ms)!
XMR: 02/03/18-21:04:03 - SHARE FOUND - (GPU 0)
Share accepted (125 ms)!
XMR: 02/03/18-21:04:08 - SHARE FOUND - (GPU 1)
Share accepted (109 ms)!
XMR: 02/03/18-21:04:16 - SHARE FOUND - (GPU 0)
Share accepted (125 ms)!
.........

----------------------------

it seems running & mining

C:\Xrp-Data\dtcclient_v9.4.1>xpmclient.exe
madPrimeMiner-v1.1
ClientName = 'custom_name_1'  ClientID = 2362209493  InstanceID = 1483689406
Address = '************************'
found platform[0] name = 'Intel(R) OpenCL'
found platform[1] name = 'AMD Accelerated Parallel Processing'
Found 2 devices
Using device 0 as GPU 0
Using device 1 as GPU 1
Compiling ...
Source: 228027 bytes
binsize = 3182232 bytes
prepare_adl success
GPU 0 iAdapterIndex 0 strUDID PCI_VEN_1002&DEV_67B0&SUBSYS_93951682&REV_80_4&37D326D7&0&00E5A iBusNumber 2 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAdapterName  AMD Radeon (TM) R9 390 Series
GPU 1 iAdapterIndex 6 strUDID PCI_VEN_1002&DEV_6811&SUBSYS_2016148C&REV_81_4&1F0ED3B6&0&00E8A iBusNumber 3 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAdapterName  AMD Radeon(TM) R9 370 Series
Failed to ADL_Adapter_ID_Get. Error -5Failed to ADL_Adapter_ID_Get. Error -5Failed to ADL_Adapter_ID_Get. Error -5GPU 0 AMD Radeon (TM) R9 390 Series hardware monitoring enabled
Failed to ADL_Overdrive5_ODPerformanceLevels_GetGPU 1 AMD Radeon(TM) R9 370 Series hardware monitoring enabled
N=12 SIZE=4096 STRIPES=210 WIDTH=20 PCOUNT=40960 TARGET=9
GPU 0: has 44 CUs
GPU 0: primorial = 13082761331670030 (54 bits)
GPU 0: sieve size = 27525120 (25 bits)
N=12 SIZE=4096 STRIPES=210 WIDTH=20 PCOUNT=40960 TARGET=9
GPU 1: has 16 CUs
GPU 1: primorial = 13082761331670030 (54 bits)
GPU 1: sieve size = 27525120 (25 bits)
Connecting to frontend: dtc.graymines.net:4444 ...
---------------------------------------------------------

stop here no more going

Radeon Software Version - 17.12.1
Radeon Software Edition - Adrenalin
Windows Version - Windows 10 (64 bit)
System Memory - 4 GB
CPU Type - Intel(R) Celeron(R) CPU 3855U @ 1.60GHz


Radeon Settings Version - 2017.1206.1740.31787
Driver Packaging Version - 17.50.02-171206a-321058C-RadeonSoftwareAdrenalin
Provider - Advanced Micro Devices, Inc.
2D Driver Version - 8.1.1.1634
Direct3D® Version - 9.14.10.01316
OpenGL® Version - 6.14.10.13506
OpenCL™ Version - 23.20.15002.11
AMD Mantle Version - 9.1.10.0237
AMD Mantle API Version - 102400
AMD Audio Driver Version - 10.0.1.6
Vulkan™ Driver Version - 2.0.1
Vulkan™ API Version - 1.0.65


Graphics Card Manufacturer - Powered by AMD
Graphics Chipset - AMD Radeon (TM) R9 390 Series
Device ID - 67B0
Vendor ID - 1002
SubSystem ID - 9395
SubSystem Vendor ID - 1682
Revision ID - 80
Bus Type - PCI Express 3.0
Current Bus Settings - PCI Express 2.0 x1
BIOS Version - 015.049.000.007
BIOS Part Number - 113-GRENADA_XT_C671_D5_8GB_HYMIC_B_W81
BIOS Date - 2015/12/03 03:03
Memory Size - 8192 MB
Memory Type - GDDR5
Memory Clock - 1500 MHz
Core Clock - 1050 MHz
Total Memory Bandwidth - 384 GByte/s
Memory Bit Rate - 6.00 Gbps
2D Driver File Path - /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4d36e968-e325-11ce-bfc1-08002be10318}/0001


Graphics Card Manufacturer - Powered by AMD
Graphics Chipset - AMD Radeon(TM) R9 370 Series
Device ID - 6811
Vendor ID - 1002
SubSystem ID - 2016
SubSystem Vendor ID - 148C
Revision ID - 81
Bus Type - PCI Express 3.0
Current Bus Settings - PCI Express 2.0 x1
BIOS Version - 015.049.000.012
BIOS Part Number - 113-C634-PROV
BIOS Date - 2016/03/13 23:49
Memory Size - 4096 MB
Memory Type - GDDR5
Memory Clock - 1425 MHz
Core Clock - 985 MHz
Total Memory Bandwidth - 182 GByte/s
Memory Bit Rate - 5.70 Gbps
2D Driver File Path - /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4d36e968-e325-11ce-bfc1-08002be10318}/0004

----------------------------
these from AMD control pannel

Hi nanadipa,

What version of Catalyst Control Center are you running?

And could you double-check that your Win 10 has all the updates done? (.net updates are key)

Regards,
DatacoinMiner

Thanks, I try delete kernel.bin.org & kernel.bin , run , show this :


madPrimeMiner-v1.1
ClientName = 'custom_name_1'  ClientID = 2362209493  InstanceID = 2443146829
Address = '********************************'  
found platform[0] name = 'Intel(R) OpenCL'
found platform[1] name = 'AMD Accelerated Parallel Processing'
Found 2 devices
Using device 0 as GPU 0
Using device 1 as GPU 1
Compiling ...
Source: 228027 bytes
binsize = 1042068 bytes
OpenCL error: -11 at /HDD/build/projects/xpmclient/xpmclient/xpmclient.cpp:992
---------------

I check CL err num:
-11   CL_BUILD_PROGRAM _FAILURE   clBuildProgram   if there is a failure to build the program executable. This error will be returned if clBuildProgram does not return until the build has completed.
----------------
win 10 with
Visual C++ 2008/2010/2012/2017
OCL_SDK_Light_AMD
AMD-APP-SDKInstaller-v3.0.130.135-GA-windows-F-x64
-----------------

How to do next ?

Yes, Datacoin addresses always start with a D.  This is not a Datacoin address.
Look at the addresses listed by Bytestamp:  http://www.bytestamp.net/blocks/lunsp

Looks like there's no problem for it, it all looks reasonable and nothing will happen, it's the thing that will not cause any problems.