[ANN] Denarius [D] - First "Tribus" PoW/PoS Hybrid Masternodes, Ring Sigs - page 9.

kingcarsen

sr. member

Activity: 1148

Merit: 417

Quote from: Rabinovitch on December 18, 2018, 04:29:38 AM

Quote from: WillJ7 on December 15, 2018, 04:31:48 PM

Same. After so many smooth upgrades, this is a bit of a disappointment. Just can't seem to finish synching up.

v3.3.3 is syncing so slowwwwwwwww..... In spite that it has 16 active connections to the network... Is there any fix for this?

We have a long blockchain now, it is recommended that you grab the chaindata

Also if you want to test out the latest wallet v3.3.4 you can grab it from our v3.4 branch on our Github or the Win64 QT from our Discord under our pinned messages in the #wallets channel. We will officially release it later on, we are still testing it, but some have had better luck with it overall compared to v3.3.3

AltScope

sr. member

Activity: 714

Merit: 252

daemon crashing on vps, been leaving the qt open rather than having issues after shutdown still no pos rewards. No fortuna rewards in over 24 hours listed as expired logged into vps and the service is not running 2nd time now Sad

Rabinovitch

legendary

Activity: 2030

Merit: 1076

A humble Siberian miner

Quote from: WillJ7 on December 15, 2018, 04:31:48 PM

Same. After so many smooth upgrades, this is a bit of a disappointment. Just can't seem to finish synching up.

v3.3.3 is syncing so slowwwwwwwww..... In spite that it has 16 active connections to the network... Is there any fix for this?

KougarLOB

member

Activity: 136

Merit: 16

Quote from: AltScope on December 16, 2018, 12:19:56 AM

Quote from: vella85 on December 15, 2018, 04:50:47 PM

Quote from: WillJ7 on December 15, 2018, 04:31:48 PM

Quote from: AltScope on December 15, 2018, 01:46:02 AM

Quote from: KougarLOB on December 14, 2018, 06:07:01 PM

I cannot sync with the network either. Out-of-date blocks is nearly 17000 at this point. I can connect to 15 other users yet watch the out-of-date blocks tick up every minute. Everything was working fine and staking until the fork.
Downloaded v3.3.3 and deleted the Peers.dat file. UPnP is checked and it shows as active on my router's UPnP list. Are there additional ports I need to open? I had to manually do so when BitBean updated a few months back.

Only thing I haven't tried is starting fresh with v3.3.3 from a wallet backup. Don't want to wait a day re-downloading the chain if I can avoid it. Any suggestions would be welcomed. Thanks.

I'm also having a lot of issues

downloaded latest wallet and tried syncing but it stalled for sa few hours
resynced using the blockchain data from github
setup vps in the same way using the blockchain and changed conf files for fortuna
unlock wallet for pos
started fortuna and it ran for an hour before stopping
restarted desktop wallet and it crashes at verifying database
resynced chain using blockchain from github
wallet started, unlocked for pos
started fortuna and it ran for about 12 hours before stopping
just restarted desktop wallet and it crashes at verifying database

edit:
gone through a resync again and sent my coins to a new wallet file. it seems to be ok now, I've restarted it a couple of times without issue

Same. After so many smooth upgrades, this is a bit of a disappointment. Just can't seem to finish synching up.

The new wallet release is working well for me after I did what Carsen said a few posts back about grabbing the chaindata1451336 and removing my old peers.dat. I then restarted the wallet and it was syncing without any issues and is fully synced so maybe you guys can try this. I got the chain data from the discord.

that's what I was doing mate, third time was the charm though

scratch that just tried to setup my masternode so restarted the wallet and its back to crashing at verifying integrity Sad

Backed-up the wallet file and wiped out the Downloaded Files folder. Downloaded the whole chain again. So now I'm up-to-date and available to stake but it's still isn't. I used to see several stakes a day. As of now I haven't staked since December 4th. Was working just fine two weeks ago. I have to restart the wallet (exit, reopen) every few hours in order to stay up to date.

AltScope

sr. member

Activity: 714

Merit: 252

Quote from: vella85 on December 15, 2018, 04:50:47 PM

Quote from: WillJ7 on December 15, 2018, 04:31:48 PM

Quote from: AltScope on December 15, 2018, 01:46:02 AM

Quote from: KougarLOB on December 14, 2018, 06:07:01 PM

I cannot sync with the network either. Out-of-date blocks is nearly 17000 at this point. I can connect to 15 other users yet watch the out-of-date blocks tick up every minute. Everything was working fine and staking until the fork.
Downloaded v3.3.3 and deleted the Peers.dat file. UPnP is checked and it shows as active on my router's UPnP list. Are there additional ports I need to open? I had to manually do so when BitBean updated a few months back.

Only thing I haven't tried is starting fresh with v3.3.3 from a wallet backup. Don't want to wait a day re-downloading the chain if I can avoid it. Any suggestions would be welcomed. Thanks.

I'm also having a lot of issues

downloaded latest wallet and tried syncing but it stalled for sa few hours
resynced using the blockchain data from github
setup vps in the same way using the blockchain and changed conf files for fortuna
unlock wallet for pos
started fortuna and it ran for an hour before stopping
restarted desktop wallet and it crashes at verifying database
resynced chain using blockchain from github
wallet started, unlocked for pos
started fortuna and it ran for about 12 hours before stopping
just restarted desktop wallet and it crashes at verifying database

edit:
gone through a resync again and sent my coins to a new wallet file. it seems to be ok now, I've restarted it a couple of times without issue

Same. After so many smooth upgrades, this is a bit of a disappointment. Just can't seem to finish synching up.

The new wallet release is working well for me after I did what Carsen said a few posts back about grabbing the chaindata1451336 and removing my old peers.dat. I then restarted the wallet and it was syncing without any issues and is fully synced so maybe you guys can try this. I got the chain data from the discord.

that's what I was doing mate, third time was the charm though

scratch that just tried to setup my masternode so restarted the wallet and its back to crashing at verifying integrity Sad

versprichnix

sr. member

Activity: 876

Merit: 291

I synced the complete blockchain with version 3.3.3, but it does not stake after unlocking. The cryptoID explorer is showing nearly now PoS blocks.

There seems to be fundamental problems with PoS, forking in hobonickels and colossusXT every few months (and stupid answers by the devs).

vella85

hero member

Activity: 1862

Merit: 590

Quote from: WillJ7 on December 15, 2018, 04:31:48 PM

Quote from: AltScope on December 15, 2018, 01:46:02 AM

Quote from: KougarLOB on December 14, 2018, 06:07:01 PM

I cannot sync with the network either. Out-of-date blocks is nearly 17000 at this point. I can connect to 15 other users yet watch the out-of-date blocks tick up every minute. Everything was working fine and staking until the fork.
Downloaded v3.3.3 and deleted the Peers.dat file. UPnP is checked and it shows as active on my router's UPnP list. Are there additional ports I need to open? I had to manually do so when BitBean updated a few months back.

Only thing I haven't tried is starting fresh with v3.3.3 from a wallet backup. Don't want to wait a day re-downloading the chain if I can avoid it. Any suggestions would be welcomed. Thanks.

I'm also having a lot of issues

downloaded latest wallet and tried syncing but it stalled for sa few hours
resynced using the blockchain data from github
setup vps in the same way using the blockchain and changed conf files for fortuna
unlock wallet for pos
started fortuna and it ran for an hour before stopping
restarted desktop wallet and it crashes at verifying database
resynced chain using blockchain from github
wallet started, unlocked for pos
started fortuna and it ran for about 12 hours before stopping
just restarted desktop wallet and it crashes at verifying database

edit:
gone through a resync again and sent my coins to a new wallet file. it seems to be ok now, I've restarted it a couple of times without issue

Same. After so many smooth upgrades, this is a bit of a disappointment. Just can't seem to finish synching up.

The new wallet release is working well for me after I did what Carsen said a few posts back about grabbing the chaindata1451336 and removing my old peers.dat. I then restarted the wallet and it was syncing without any issues and is fully synced so maybe you guys can try this. I got the chain data from the discord.

WillJ7

jr. member

Activity: 32

Merit: 4

Quote from: AltScope on December 15, 2018, 01:46:02 AM

Quote from: KougarLOB on December 14, 2018, 06:07:01 PM

I cannot sync with the network either. Out-of-date blocks is nearly 17000 at this point. I can connect to 15 other users yet watch the out-of-date blocks tick up every minute. Everything was working fine and staking until the fork.
Downloaded v3.3.3 and deleted the Peers.dat file. UPnP is checked and it shows as active on my router's UPnP list. Are there additional ports I need to open? I had to manually do so when BitBean updated a few months back.

Only thing I haven't tried is starting fresh with v3.3.3 from a wallet backup. Don't want to wait a day re-downloading the chain if I can avoid it. Any suggestions would be welcomed. Thanks.

I'm also having a lot of issues

downloaded latest wallet and tried syncing but it stalled for sa few hours
resynced using the blockchain data from github
setup vps in the same way using the blockchain and changed conf files for fortuna
unlock wallet for pos
started fortuna and it ran for an hour before stopping
restarted desktop wallet and it crashes at verifying database
resynced chain using blockchain from github
wallet started, unlocked for pos
started fortuna and it ran for about 12 hours before stopping
just restarted desktop wallet and it crashes at verifying database

edit:
gone through a resync again and sent my coins to a new wallet file. it seems to be ok now, I've restarted it a couple of times without issue

Same. After so many smooth upgrades, this is a bit of a disappointment. Just can't seem to finish synching up.

AltScope

sr. member

Activity: 714

Merit: 252

Quote from: KougarLOB on December 14, 2018, 06:07:01 PM

I cannot sync with the network either. Out-of-date blocks is nearly 17000 at this point. I can connect to 15 other users yet watch the out-of-date blocks tick up every minute. Everything was working fine and staking until the fork.
Downloaded v3.3.3 and deleted the Peers.dat file. UPnP is checked and it shows as active on my router's UPnP list. Are there additional ports I need to open? I had to manually do so when BitBean updated a few months back.

Only thing I haven't tried is starting fresh with v3.3.3 from a wallet backup. Don't want to wait a day re-downloading the chain if I can avoid it. Any suggestions would be welcomed. Thanks.

I'm also having a lot of issues

downloaded latest wallet and tried syncing but it stalled for sa few hours
resynced using the blockchain data from github
setup vps in the same way using the blockchain and changed conf files for fortuna
unlock wallet for pos
started fortuna and it ran for an hour before stopping
restarted desktop wallet and it crashes at verifying database
resynced chain using blockchain from github
wallet started, unlocked for pos
started fortuna and it ran for about 12 hours before stopping
just restarted desktop wallet and it crashes at verifying database

edit:
gone through a resync again and sent my coins to a new wallet file. it seems to be ok now, I've restarted it a couple of times without issue

KougarLOB

member

Activity: 136

Merit: 16

I cannot sync with the network either. Out-of-date blocks is nearly 17000 at this point. I can connect to 15 other users yet watch the out-of-date blocks tick up every minute. Everything was working fine and staking until the fork.
Downloaded v3.3.3 and deleted the Peers.dat file. UPnP is checked and it shows as active on my router's UPnP list. Are there additional ports I need to open? I had to manually do so when BitBean updated a few months back.

Only thing I haven't tried is starting fresh with v3.3.3 from a wallet backup. Don't want to wait a day re-downloading the chain if I can avoid it. Any suggestions would be welcomed. Thanks.

kingcarsen

sr. member

Activity: 1148

Merit: 417

https://www.coinexchange.io/market/D/BTC
https://www.coinexchange.io/market/D/ETH

The Denarius wallet on CoinExchange.io was updated and is online again 😁😎

kingcarsen

sr. member

Activity: 1148

Merit: 417

Quote from: vella85 on December 12, 2018, 05:09:14 PM

Thank you Carsen! I've been waiting for this update as I couldn't seem to get the latest wallet to sync with the network. Hopefully now this latest release has fixed all the issues and we can move on. By the way I picked up some more DNR recently as at the current price its a steal.

No prob! Enkayz did a lot of work in these past releases! We have had a stable chain for the past two days almost now and v3.3.3 is working solid, you shouldn't have any issues, if you do, grab the chaindata1451336, remove your old peers.dat and try restarting your wallet. Otherwise you should be good! Cheesy

vella85

hero member

Activity: 1862

Merit: 590

Thank you Carsen! I've been waiting for this update as I couldn't seem to get the latest wallet to sync with the network. Hopefully now this latest release has fixed all the issues and we can move on. By the way I picked up some more DNR recently as at the current price its a steal.

kingcarsen

sr. member

Activity: 1148

Merit: 417

Denarius v3.3.3

Mandatory Update, All nodes, services, and wallets must update to v3.3.3

-Protocol upgrade to 31005, FortunaStakes will transition to 31005 after block 1.5m
-Our blockchain is now stable, this release is stable (v3.3.3)
-Many improvements and bug fixes to our custom Fair Payment System (FSFPS)
-GUI Improvements for FortunaStakes
-Overall wallet optimization, HUGE Performance boost.
-New Fortuna Stake Icon in QT
-New features,statistics, and improvements to Fortuna Stakes in QT and daemon
-Overall syncing improvements for syncing and once synced.
-Added more checkpoints
-Staking Icon is now fixed to show green when staking in the QT UI
-Nodes require a heartbeat as well as timespan to be an active node
-Pruned Paydata to prevent overpayments
-Fixed Reorg Loops and overall reorgs
-Fixes to the Syncing Bar in the QT UI
-Fixed several possible conditions for de-sync on nodes.
-Improved the readability of the My Fortunastake tab

You can get Denarius v3.3.3 from the links below or git pull our master branch:

https://github.com/carsenk/denarius/releases/tag/v3.3.3

https://github.com/carsenk/denarius/releases/download/v3.3.3/Denarius-v3.3.3-Win64.zip

https://github.com/carsenk/denarius/releases/download/v3.3.3/Denarius-v3.3.3-macOS.dmg

https://github.com/carsenk/denarius/releases/download/v3.3.3/denariusd-v333-ubuntu1604.tar.gz

kingcarsen

sr. member

Activity: 1148

Merit: 417

Denarius v3.3 is currently in testing and everyone is recommended to update, the official announcement will be coming soon. You can git pull our master branch to receive the latest v3.3

kingcarsen

sr. member

Activity: 1148

Merit: 417

Quote from: vella85 on December 05, 2018, 11:44:31 PM

This new wallet version is causing problems for me, I keep getting the wallet say not responding which I never had before this version. I also noticed that the blocks were showing minus blocks which was not normal. I'm just wondering if anyone else is having the same issues?

Grab the latest release, v3.2.5 now, we updated in the last hour, we are contacting all services to update again, hashbag/denarii/denarius.host are all updated, please wait for confirmation from other services before sending coins. We do have a stable chain now and everything should be peachy in this latest release Cheesy

https://github.com/carsenk/denarius/releases/download/v3.2.5/Denarius-v3.2.5-Win64.zip (Or git pull master)
https://github.com/carsenk/denarius/releases/download/v3.2.5/Denarius-v3.2.5-macOS.dmg

vella85

hero member

Activity: 1862

Merit: 590

This new wallet version is causing problems for me, I keep getting the wallet say not responding which I never had before this version. I also noticed that the blocks were showing minus blocks which was not normal. I'm just wondering if anyone else is having the same issues?

Kriptos

member

Activity: 532

Merit: 10

Adoption Blockchain e-Commerce to World

I was impressed to see many features offered by denarius, in addition to secure fast and reliable Denarius also provides swap feature atom at blockchainnya where you can use the BarterDEX (Decentralized Exchange) to buy or sell in D through the exchange of Atomic atom without 3rd party.

WhyMe

sr. member

Activity: 661

Merit: 250

So it seems to have 2 blockchains now, what pools are on ths good chain ?

kingcarsen

sr. member

Activity: 1148

Merit: 417

Quote from: ?? on ??

Happy to see this project is still alive, keep it up.

Thanks this release was a lot of work, still lots more to do! Cheesy

but the chain is currently functioning stable right now with the latest master branch or binary (v3.2) current block at time of this writing is: 1453035

Topic: [ANN] Denarius [D] - First "Tribus" PoW/PoS Hybrid Masternodes, Ring Sigs - page 9. (Read 504285 times)