Topic: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 57. (Read 224961 times)

Thats nice!  I know my 1080TI can hit upwards of 800Sol around 1850-1900Mhz (it moves around) at 90% TDP if the temp is sub 50C.  Yeah my efficiency rides around 3.3-3.4 with the card on average.  Still good in my book.  Way better than when i started at only 680 Sols @ 100% TDP  It ends up being more efficient than my 1060's I got but least I topped out what my 2 small rigs can handle for cards and temp.  

Maybe I should look back into water cooling again.  Use to do it ages ago(14+ years), maybe its time to investigate it again.
[/quote]

How do you get 800+ @1900MHz, what card and what OC settings, can you share?

I am able to hit 790-805 @2015Mhz (270W)

Thank you.
One more problem, miner reduces hash rates until almost zero but does not automatically reload or adjust accordingly as pool switches coin.  Not sure how to explain it. What can I do to resolve this. It only happens with DSTM and if I'm asleep it remains low for hours until I reload  manually.
Also some gpus drop to a far lower intensity than others but do not recover.
Happens on nicehash and miningpoolhub so I'm convinced it's the miner.
I'm fine with paying dev fees as long as I have good product support..

Thats nice!  I know my 1080TI can hit upwards of 800Sol around 1850-1900Mhz (it moves around) at 90% TDP if the temp is sub 50C.  Yeah my efficiency rides around 3.3-3.4 with the card on average.  Still good in my book.  Way better than when i started at only 680 Sols @ 100% TDP  It ends up being more efficient than my 1060's I got but least I topped out what my 2 small rigs can handle for cards and temp.  

Maybe I should look back into water cooling again.  Use to do it ages ago(14+ years), maybe its time to investigate it again.

Well, my GTX 1080 that is in my daily rig is watercooled. Doing 2000Mhz with 0.9v(85% TDP that would be), at max 37C. Efficiency over 4sol/w... I tried 2200MHz, which my card can do ez, but not getting more sols to be honest...

I'd 100% agree with that.  Thankfully it doesn't crash/freeze the PC unlike other software I've used.  It just crashes the miner and kills it.  Much better solution IMO, and easier to restart it if needed.  Slight down clock does the trick.


I've had better luck with higher clocks (sometimes drastic) with dstm.  Course every Rig, PC and Software is different with each configuration slightly.  Just to see if there was a major difference again, I tried the EWBF with the --fee 0 option on one of my 1060's.  I was getting 305-308 sols average.  DSTM same settings 322 sols average.  So with a 6.5 dev fee I'm getting 8-11 more sols during mining.  Not much but quicker but still in the positive column to the tune of a few extra bucks a month (given the markets current drop in price).

Should we expect a slight increase in productivity due to restructuring? or reduce CPU load?

Could you look at CUDA 9.0, maybe it will be possible to slightly increase the performance?

Are there any ways to optimize for 1080 and 1080 Ti ?
Thank you very much for your work.

Well my exp here is
With 1080, im getting 565-570 Sols, on EWBF
With DSTM, about 550sols, - 2% fee = 540 sol = nah not gonna use DSTM

With my 1080Ti rigs, I see some slight improvement over EWBF, but If I take 2% fee into consideration, then Im at the same speed as with EWBF.


So....using DSTM Im not getting anything extra, in fact i would be losing $$.

ANd then, if it starts to crash, I have to redo my OC? and lower it = less Sols = even less$?

Nah thanks.

can we use this with suprnova?will someone could give me the bat file for it. thanks

I'm currently focusing on some restructuring and failover pool support.

I'm not aware how other mining software implements the developer fee however zm uses very fine grained periods this is why the connection is always established.

This is nothing unusual, the temperature might differ even if you're using the same vendor/model. You could also check the GPU-utilization like it's reported by 'nvidia-smi' to make sure there are not software issues.

This is due to overclocking - you have to readjust it slightly.

Some clarification due to recent fee debate.

This is ofc something I was thinking about - speaking to my colleagues/friends, so called 'consultants' etc. Most of them suggest me to increase it especially on performance improvements. To make it short: I won't change it.

Claymore's Zcash mining software was stated a couple of times - the information wasn't always accurate so that's what Claymore states on his page:
"...current developer fee is 2% if you use secure SSL/TLS connection to mining pool ...If you use unsecure connection to mining pool, current developer fee is 2.5% ... If you don't agree with the dev fee - don't use this miner, or use "-nofee" option."
"-nofee   set "1" to cancel my developer fee at all. In this mode some recent optimizations are disabled so mining speed will be slower by about 5%."

I'm not sure if the statements about zm's accuracy were given by intention or by uncertainty - however it's important to me to clarify this: All numbers reported by zm including the developer fee are exact.

Millions every month.

Damn, seeing these number makes you think...Imagine how much is earning Claymore from his miner 

2x gtx 1080

>  GPU0  69C  Sol/s: 541.2  Sol/W: 3.07  Avg: 549.0  I/s: 294.1  Sh: 1.32   1.00 207
   GPU1  71C  Sol/s: 547.1  Sol/W: 3.05  Avg: 542.4  I/s: 291.0  Sh: 1.23   1.00 205
   ========== Sol/s: 1088.3 Sol/W: 3.06  Avg: 1091.4 I/s: 585.1  Sh: 2.55   1.00 206

used

sudo nvidia-smi -pm ENABLED
sudo nvidia-smi -pl 180

+-----------------------------------------------------------------------------+
| NVIDIA-SMI 387.26                 Driver Version: 387.26                    |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1080    On   | 00000000:02:00.0 Off |                  N/A |
| 30%   69C    P2   181W / 180W |    547MiB /  8114MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GTX 1080    On   | 00000000:03:00.0  On |                  N/A |
| 34%   71C    P2   182W / 180W |    882MiB /  8105MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+


any idea how to reduce cpu temp a little?

by 10 days I mine  zclassic to miningpoolhub   I use  EWBF miner.0.3.4b zcl and zm_0.5.7_win (DSTM)   with 2Xgtx 1070ti .
w/ EWBF  965 - 985 Sol/s   with DSTM max 1000-1015 Sol/s   w/ dstm  I get  an increase of 3-5% .

 in EWBF   fee is 0,  dstm  fee 2%..... so fuck it ..for 1-2% more don't worth it..plus  DSTM crash  sometimes ..I can't trust it  because I'm not home  all day.

I use   EWBF  to mine ZEC and never crash    ..mining ZCL  no issue .I even have the PC mining 2days and  work well, no crashing no restarting no fucking around ..and my OC is very close to the limit (if I increase the clock to +300 will crash ) : power 60%   core +250  memory +750  (I choose this because  Efficiency 4.7 Sol/Watt)


https://www.reddit.com/r/ZcashMiners/comments/7pm4jm/anyone_else_overclocking_gtx_1070_tis/dsk23jm/

@DSTM why won't you enable backup addres?

DSTM, any updates soon ?

I skipped 0.5.8 because nothing good for me and i'm  waiting new version with something new in performance level.

Christ almighty.  Don't friggin use the dstm miner if it goes against your "moral beliefs".   Go junk up another miners thread with your high and mighty spouting.