When I try to mine ZClassic I get the following error:
Waiting for 0 seconds, press a key to continue ...
# zm 0.5.6
# GPU0 + GeForce GTX 1070 MB: 8192 PCI: 0:6
# GPU0 connected to: ny1.minez.zone:3054
# GPU0 server set difficulty to: 0000ccccccccccccd0000000...
protocol version 01000020 not supported
Topic: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 99. (Read 224961 times)
November 28, 2017, 07:29:47 PM
November 28, 2017, 07:13:31 PM
I'm having issues with memory errors after 6 hours, is there a restart script i can use in my .bat ?
Look at previous pages, there is alot of scripts examples.
The new version is working great after reworking my overclock. The oc I had been using with previous versions was causing the miner to crash. Reducing the oc managed to keep about the same rate while slightly increasing efficiency from about 3.3 Sol/W to about 3.5.
Keep up the good work.
Code:
ID DEVICE NAME °C ∅ Sol/s ∅ Sol/W ∅ Watt
0 GeForce GTX 1070 55 498.70 3.53 141.56
Keep up the good work.
What settings are you using and what card is it?
MSI Gaming X
+150 clock +610 mem 60% power
Efficiency is a little better at 60%, rate is closer to 510 Sol/s at 70% power.
3.53sols/w is pretty low tbh, except if you have great electricity price, my rigs have between 4.2 and 4.3s/w efficiency.
November 28, 2017, 06:59:12 PM
The new version is working great after reworking my overclock. The oc I had been using with previous versions was causing the miner to crash. Reducing the oc managed to keep about the same rate while slightly increasing efficiency from about 3.3 Sol/W to about 3.5.
Keep up the good work.
Code:
ID DEVICE NAME °C ∅ Sol/s ∅ Sol/W ∅ Watt
0 GeForce GTX 1070 55 498.70 3.53 141.56
Keep up the good work.
What settings are you using and what card is it?
MSI Gaming X
+150 clock +610 mem 60% power
Efficiency is a little better at 60%, rate is closer to 510 Sol/s at 70% power.
November 28, 2017, 06:29:03 PM
I'm having issues with memory errors after 6 hours, is there a restart script i can use in my .bat ?
November 28, 2017, 06:25:51 PM
how can i setup backup(reserve) pool if 1 goes offline, curently i'm using flypool.
November 28, 2017, 06:08:37 PM
Is this for monitoring your rigs ?
How does that work, if you use the telemetry option with your ip ?
Do you use an app on your phone or a website ?
How does that work, if you use the telemetry option with your ip ?
Do you use an app on your phone or a website ?
just open a web browser and point it to your rig ip and port you defined in the telemetry parameter
Code:
--telemetry=192.166.1.200:4444
Code:
http://192.166.1.200:4444
that's it.
Json is a bit more complex to use so stick with web interface for starters
November 28, 2017, 05:54:31 PM
The new version is working great after reworking my overclock. The oc I had been using with previous versions was causing the miner to crash. Reducing the oc managed to keep about the same rate while slightly increasing efficiency from about 3.3 Sol/W to about 3.5.
Keep up the good work.
Code:
ID DEVICE NAME °C ∅ Sol/s ∅ Sol/W ∅ Watt
0 GeForce GTX 1070 55 498.70 3.53 141.56
Keep up the good work.
What settings are you using and what card is it?
November 28, 2017, 01:22:16 PM
I was observing that thread since 0.3x version and your miner looks interesting.
Today finally I tested it. Unfortunately I noticed that I've a bit lower hashrate than on EWBF. ~520-525 vs 530-550 Sol/s. I've GTX 1080.
Temperatures and power use is similar (68C and 165-170W). 85% TDP. Memory +200mhz.
I set vcore to +80mhz. On EWBF maximum was +60mhz (it crashed even on 65mhz after 24h). I'm not testing your miner long time but looks more stable. On EWBF +80mhz gets me fast crash.
I hope that you will be able to increase performance for GTX 1080 too because as opposed to gtx 1060 and 1080ti, currently EWBF looks more efficient for me.
Also to my mind you could use some colors to make it more transparent to read and ability to run on background (--quiet/--background?). Thanks for your job
PS. Sol/W is great option. I'll be able to better OC my card with it.
----------
edit:
crash after 3-4 hours. I'll try with +75mhz..
---------
Today finally I tested it. Unfortunately I noticed that I've a bit lower hashrate than on EWBF. ~520-525 vs 530-550 Sol/s. I've GTX 1080.
Temperatures and power use is similar (68C and 165-170W). 85% TDP. Memory +200mhz.
I set vcore to +80mhz. On EWBF maximum was +60mhz (it crashed even on 65mhz after 24h). I'm not testing your miner long time but looks more stable. On EWBF +80mhz gets me fast crash.
I hope that you will be able to increase performance for GTX 1080 too because as opposed to gtx 1060 and 1080ti, currently EWBF looks more efficient for me.
Also to my mind you could use some colors to make it more transparent to read and ability to run on background (--quiet/--background?). Thanks for your job
PS. Sol/W is great option. I'll be able to better OC my card with it.
----------
edit:
crash after 3-4 hours. I'll try with +75mhz..
---------
Quote
GPU0 67C Sol/s: 518.7 Sol/W: 3.13 Avg: 525.1 I/s: 280.5 Sh: 7.76 1.00 47 ++
GPU0 68C Sol/s: 516.0 Sol/W: 3.13 Avg: 523.6 I/s: 280.3 Sh: 7.46 1.00 47 ++
# GPU0 server set difficulty to: 000a0a0a0a0a0a0a0a0a0a0a...
> GPU0 67C Sol/s: 503.6 Sol/W: 3.14 Avg: 520.7 I/s: 269.7 Sh: 7.67 1.00 46 +++
GPU0 68C Sol/s: 525.4 Sol/W: 3.14 Avg: 521.3 I/s: 280.4 Sh: 6.71 1.00 46
GPU0 68C Sol/s: 531.0 Sol/W: 3.14 Avg: 522.4 I/s: 280.5 Sh: 5.97 1.00 46
GPU0 68C Sol/s: 526.5 Sol/W: 3.14 Avg: 522.8 I/s: 280.5 Sh: 6.57 1.00 39 ++++
GPU0 67C Sol/s: 523.7 Sol/W: 3.14 Avg: 522.9 I/s: 280.4 Sh: 6.24 1.00 63 +
GPU0 67C Sol/s: 524.0 Sol/W: 3.14 Avg: 523.0 I/s: 280.4 Sh: 5.72 1.00 63
> GPU0 68C Sol/s: 523.5 Sol/W: 3.14 Avg: 523.0 I/s: 280.4 Sh: 5.74 1.00 70 ++
GPU0 68C Sol/s: 524.8 Sol/W: 3.13 Avg: 523.1 I/s: 280.5 Sh: 5.76 1.00 46 ++
GPU0 68C Sol/s: 525.2 Sol/W: 3.13 Avg: 523.3 I/s: 280.3 Sh: 5.77 1.00 47 ++
GPU0 68C Sol/s: 523.8 Sol/W: 3.13 Avg: 523.3 I/s: 280.4 Sh: 5.41 1.00 47
GPU0 68C Sol/s: 524.0 Sol/W: 3.13 Avg: 523.4 I/s: 280.4 Sh: 5.44 1.00 55 ++
GPU0 68C Sol/s: 529.8 Sol/W: 3.13 Avg: 523.7 I/s: 280.5 Sh: 5.64 1.00 57 +++
> GPU0 68C Sol/s: 523.8 Sol/W: 3.13 Avg: 523.7 I/s: 280.6 Sh: 5.34 1.00 57
GPU0 68C Sol/s: 521.7 Sol/W: 3.13 Avg: 523.6 I/s: 280.3 Sh: 5.23 1.00 47 +
GPU0 68C Sol/s: 525.1 Sol/W: 3.13 Avg: 523.7 I/s: 280.3 Sh: 5.26 1.00 46 ++
GPU0 68C Sol/s: 519.0 Sol/W: 3.13 Avg: 523.5 I/s: 280.4 Sh: 5.02 1.00 46
GPU0 68C Sol/s: 521.1 Sol/W: 3.13 Avg: 523.4 I/s: 280.5 Sh: 4.93 1.00 63 +
GPU0 68C Sol/s: 523.9 Sol/W: 3.13 Avg: 523.4 I/s: 282.1 Sh: 5.23 1.00 47 ++++
GPU0 68C Sol/s: 516.0 Sol/W: 3.13 Avg: 523.6 I/s: 280.3 Sh: 7.46 1.00 47 ++
# GPU0 server set difficulty to: 000a0a0a0a0a0a0a0a0a0a0a...
> GPU0 67C Sol/s: 503.6 Sol/W: 3.14 Avg: 520.7 I/s: 269.7 Sh: 7.67 1.00 46 +++
GPU0 68C Sol/s: 525.4 Sol/W: 3.14 Avg: 521.3 I/s: 280.4 Sh: 6.71 1.00 46
GPU0 68C Sol/s: 531.0 Sol/W: 3.14 Avg: 522.4 I/s: 280.5 Sh: 5.97 1.00 46
GPU0 68C Sol/s: 526.5 Sol/W: 3.14 Avg: 522.8 I/s: 280.5 Sh: 6.57 1.00 39 ++++
GPU0 67C Sol/s: 523.7 Sol/W: 3.14 Avg: 522.9 I/s: 280.4 Sh: 6.24 1.00 63 +
GPU0 67C Sol/s: 524.0 Sol/W: 3.14 Avg: 523.0 I/s: 280.4 Sh: 5.72 1.00 63
> GPU0 68C Sol/s: 523.5 Sol/W: 3.14 Avg: 523.0 I/s: 280.4 Sh: 5.74 1.00 70 ++
GPU0 68C Sol/s: 524.8 Sol/W: 3.13 Avg: 523.1 I/s: 280.5 Sh: 5.76 1.00 46 ++
GPU0 68C Sol/s: 525.2 Sol/W: 3.13 Avg: 523.3 I/s: 280.3 Sh: 5.77 1.00 47 ++
GPU0 68C Sol/s: 523.8 Sol/W: 3.13 Avg: 523.3 I/s: 280.4 Sh: 5.41 1.00 47
GPU0 68C Sol/s: 524.0 Sol/W: 3.13 Avg: 523.4 I/s: 280.4 Sh: 5.44 1.00 55 ++
GPU0 68C Sol/s: 529.8 Sol/W: 3.13 Avg: 523.7 I/s: 280.5 Sh: 5.64 1.00 57 +++
> GPU0 68C Sol/s: 523.8 Sol/W: 3.13 Avg: 523.7 I/s: 280.6 Sh: 5.34 1.00 57
GPU0 68C Sol/s: 521.7 Sol/W: 3.13 Avg: 523.6 I/s: 280.3 Sh: 5.23 1.00 47 +
GPU0 68C Sol/s: 525.1 Sol/W: 3.13 Avg: 523.7 I/s: 280.3 Sh: 5.26 1.00 46 ++
GPU0 68C Sol/s: 519.0 Sol/W: 3.13 Avg: 523.5 I/s: 280.4 Sh: 5.02 1.00 46
GPU0 68C Sol/s: 521.1 Sol/W: 3.13 Avg: 523.4 I/s: 280.5 Sh: 4.93 1.00 63 +
GPU0 68C Sol/s: 523.9 Sol/W: 3.13 Avg: 523.4 I/s: 282.1 Sh: 5.23 1.00 47 ++++
November 28, 2017, 11:42:25 AM
hello i previesly used EWBF and now i started using dstm's mining. Where i can see how much shares in total is accepted like in EWBF?
And is this normal for Asus Strix GTX 1080 Ti 85%TDP +100 +300 and Asus Dual GTX 1060 85%TDP +155 +700
And what that "1"at end mean?
And is this normal for Asus Strix GTX 1080 Ti 85%TDP +100 +300 and Asus Dual GTX 1060 85%TDP +155 +700
Code:
2017-11-27 21.17.06|> GPU0 57C Sol/s: 735.6 Sol/W: 3.23 Avg: 752.5 I/s: 401.3 Sh: 1.99 1.00 76 +
2017-11-27 21.17.09| GPU1 62C Sol/s: 327.9 Sol/W: 3.27 Avg: 331.2 I/s: 176.4 Sh: 0.99 1.00 77
2017-11-27 21.17.09| ========== Sol/s: 1063.5 Sol/W: 3.25 Avg: 1083.6 I/s: 577.8 Sh: 2.99 1.00 76
2017-11-27 21.17.26| GPU0 57C Sol/s: 762.7 Sol/W: 3.24 Avg: 752.9 I/s: 401.2 Sh: 2.31 1.00 76 +++
2017-11-27 21.17.29| GPU1 63C Sol/s: 329.7 Sol/W: 3.27 Avg: 331.1 I/s: 174.5 Sh: 1.08 1.00 76 +
2017-11-27 21.17.29| ========== Sol/s: 1092.4 Sol/W: 3.25 Avg: 1084.0 I/s: 575.8 Sh: 3.40 1.00 76
2017-11-27 21.17.46| GPU0 58C Sol/s: 762.5 Sol/W: 3.24 Avg: 753.4 I/s: 401.0 Sh: 2.34 1.00 75 +
2017-11-27 21.17.49| GPU1 63C Sol/s: 325.6 Sol/W: 3.27 Avg: 330.9 I/s: 174.9 Sh: 1.17 1.00 76 +
2017-11-27 21.17.49| ========== Sol/s: 1088.1 Sol/W: 3.25 Avg: 1084.2 I/s: 575.9 Sh: 3.51 1.00 75
2017-11-27 21.18.06| GPU0 57C Sol/s: 745.8 Sol/W: 3.24 Avg: 753.0 I/s: 401.1 Sh: 2.24 1.00 75
2017-11-27 21.18.10| GPU1 63C Sol/s: 331.9 Sol/W: 3.27 Avg: 330.9 I/s: 175.0 Sh: 1.24 1.00 75 +
2017-11-27 21.18.10| ========== Sol/s: 1077.7 Sol/W: 3.25 Avg: 1083.9 I/s: 576.1 Sh: 3.49 1.00 75
2017-11-27 21.18.26| GPU0 57C Sol/s: 760.2 Sol/W: 3.24 Avg: 753.3 I/s: 401.3 Sh: 2.27 1.00 374 +
2017-11-27 21.18.30| GPU1 63C Sol/s: 323.0 Sol/W: 3.26 Avg: 330.6 I/s: 175.1 Sh: 1.31 1.00 75 +
2017-11-27 21.18.30| ========== Sol/s: 1083.2 Sol/W: 3.25 Avg: 1083.9 I/s: 576.4 Sh: 3.59 1.00 224
2017-11-27 21.18.46| GPU0 57C Sol/s: 758.9 Sol/W: 3.24 Avg: 753.5 I/s: 401.2 Sh: 2.30 1.00 75 +
2017-11-27 21.18.50| GPU1 63C Sol/s: 323.9 Sol/W: 3.26 Avg: 330.3 I/s: 173.3 Sh: 1.26 1.00 75
2017-11-27 21.18.50| ========== Sol/s: 1082.8 Sol/W: 3.25 Avg: 1083.9 I/s: 574.5 Sh: 3.56 1.00 75
2017-11-27 21.19.06|> GPU0 58C Sol/s: 745.8 Sol/W: 3.24 Avg: 753.3 I/s: 401.3 Sh: 2.33 1.00 75 +
2017-11-27 21.19.10|> GPU1 64C Sol/s: 327.6 Sol/W: 3.26 Avg: 330.2 I/s: 173.1 Sh: 1.32 1.00 75 +
2017-11-27 21.19.10| ========== Sol/s: 1073.4 Sol/W: 3.25 Avg: 1083.5 I/s: 574.4 Sh: 3.65 1.00 75
And what that "1"at end mean?
These are great hashrates, and I like the sol/w you get. My asus strix 1080ti gets me about 780sols, but I run them on pw limit 105, core +150 and memory +550.
When i set OC on my Assus Strix 1080Ti 100% power limit, +100 core i got power loss after a few second and i need to reset my PC? did you have that problem and where are you from?
I didn't tried to increase Power limit.
http://prntscr.com/hgf3g7
November 28, 2017, 11:25:50 AM
hello i previesly used EWBF and now i started using dstm's mining. Where i can see how much shares in total is accepted like in EWBF?
And is this normal for Asus Strix GTX 1080 Ti 85%TDP +100 +300 and Asus Dual GTX 1060 85%TDP +155 +700
And what that "1"at end mean?
And is this normal for Asus Strix GTX 1080 Ti 85%TDP +100 +300 and Asus Dual GTX 1060 85%TDP +155 +700
Code:
2017-11-27 21.17.06|> GPU0 57C Sol/s: 735.6 Sol/W: 3.23 Avg: 752.5 I/s: 401.3 Sh: 1.99 1.00 76 +
2017-11-27 21.17.09| GPU1 62C Sol/s: 327.9 Sol/W: 3.27 Avg: 331.2 I/s: 176.4 Sh: 0.99 1.00 77
2017-11-27 21.17.09| ========== Sol/s: 1063.5 Sol/W: 3.25 Avg: 1083.6 I/s: 577.8 Sh: 2.99 1.00 76
2017-11-27 21.17.26| GPU0 57C Sol/s: 762.7 Sol/W: 3.24 Avg: 752.9 I/s: 401.2 Sh: 2.31 1.00 76 +++
2017-11-27 21.17.29| GPU1 63C Sol/s: 329.7 Sol/W: 3.27 Avg: 331.1 I/s: 174.5 Sh: 1.08 1.00 76 +
2017-11-27 21.17.29| ========== Sol/s: 1092.4 Sol/W: 3.25 Avg: 1084.0 I/s: 575.8 Sh: 3.40 1.00 76
2017-11-27 21.17.46| GPU0 58C Sol/s: 762.5 Sol/W: 3.24 Avg: 753.4 I/s: 401.0 Sh: 2.34 1.00 75 +
2017-11-27 21.17.49| GPU1 63C Sol/s: 325.6 Sol/W: 3.27 Avg: 330.9 I/s: 174.9 Sh: 1.17 1.00 76 +
2017-11-27 21.17.49| ========== Sol/s: 1088.1 Sol/W: 3.25 Avg: 1084.2 I/s: 575.9 Sh: 3.51 1.00 75
2017-11-27 21.18.06| GPU0 57C Sol/s: 745.8 Sol/W: 3.24 Avg: 753.0 I/s: 401.1 Sh: 2.24 1.00 75
2017-11-27 21.18.10| GPU1 63C Sol/s: 331.9 Sol/W: 3.27 Avg: 330.9 I/s: 175.0 Sh: 1.24 1.00 75 +
2017-11-27 21.18.10| ========== Sol/s: 1077.7 Sol/W: 3.25 Avg: 1083.9 I/s: 576.1 Sh: 3.49 1.00 75
2017-11-27 21.18.26| GPU0 57C Sol/s: 760.2 Sol/W: 3.24 Avg: 753.3 I/s: 401.3 Sh: 2.27 1.00 374 +
2017-11-27 21.18.30| GPU1 63C Sol/s: 323.0 Sol/W: 3.26 Avg: 330.6 I/s: 175.1 Sh: 1.31 1.00 75 +
2017-11-27 21.18.30| ========== Sol/s: 1083.2 Sol/W: 3.25 Avg: 1083.9 I/s: 576.4 Sh: 3.59 1.00 224
2017-11-27 21.18.46| GPU0 57C Sol/s: 758.9 Sol/W: 3.24 Avg: 753.5 I/s: 401.2 Sh: 2.30 1.00 75 +
2017-11-27 21.18.50| GPU1 63C Sol/s: 323.9 Sol/W: 3.26 Avg: 330.3 I/s: 173.3 Sh: 1.26 1.00 75
2017-11-27 21.18.50| ========== Sol/s: 1082.8 Sol/W: 3.25 Avg: 1083.9 I/s: 574.5 Sh: 3.56 1.00 75
2017-11-27 21.19.06|> GPU0 58C Sol/s: 745.8 Sol/W: 3.24 Avg: 753.3 I/s: 401.3 Sh: 2.33 1.00 75 +
2017-11-27 21.19.10|> GPU1 64C Sol/s: 327.6 Sol/W: 3.26 Avg: 330.2 I/s: 173.1 Sh: 1.32 1.00 75 +
2017-11-27 21.19.10| ========== Sol/s: 1073.4 Sol/W: 3.25 Avg: 1083.5 I/s: 574.4 Sh: 3.65 1.00 75
And what that "1"at end mean?
These are great hashrates, and I like the sol/w you get. My asus strix 1080ti gets me about 780sols, but I run them on pw limit 105, core +150 and memory +550.
November 28, 2017, 11:09:42 AM
use
example
Will bind all your local ip of the rig to port 4444, it will make webui and json available on those local ip/port combo
To specify an ip of your rig instead of bind all.
Windows firewall will ask you to open the port when you start the miner first time if you didn't allowed it before.
Code:
--telemetry=your_rig_ip:network_port
example
Code:
--telemetry=0.0.0.0:4444
Will bind all your local ip of the rig to port 4444, it will make webui and json available on those local ip/port combo
Code:
--telemetry=192.166.1.200:4444
To specify an ip of your rig instead of bind all.
Windows firewall will ask you to open the port when you start the miner first time if you didn't allowed it before.
Thanks, i didnt know i need to put = between telemetry and IP
November 28, 2017, 11:07:05 AM
Is this for monitoring your rigs ?
How does that work, if you use the telemetry option with your ip ?
Do you use an app on your phone or a website ?
How does that work, if you use the telemetry option with your ip ?
Do you use an app on your phone or a website ?
November 28, 2017, 10:33:27 AM
use
example
Will bind all your local ip of the rig to port 4444, it will make webui and json available on those local ip/port combo
To specify an ip of your rig instead of bind all.
Windows firewall will ask you to open the port when you start the miner first time if you didn't allowed it before.
Code:
--telemetry=your_rig_ip:network_port
example
Code:
--telemetry=0.0.0.0:4444
Will bind all your local ip of the rig to port 4444, it will make webui and json available on those local ip/port combo
Code:
--telemetry=192.166.1.200:4444
To specify an ip of your rig instead of bind all.
Windows firewall will ask you to open the port when you start the miner first time if you didn't allowed it before.
November 28, 2017, 10:12:55 AM
hello i previesly used EWBF and now i started using dstm's mining. Where i can see how much shares in total is accepted like in EWBF?
And is this normal for Asus Strix GTX 1080 Ti 85%TDP +100 +300 and Asus Dual GTX 1060 85%TDP +155 +700
And what that "1"at end mean?
And is this normal for Asus Strix GTX 1080 Ti 85%TDP +100 +300 and Asus Dual GTX 1060 85%TDP +155 +700
Code:
2017-11-27 21.17.06|> GPU0 57C Sol/s: 735.6 Sol/W: 3.23 Avg: 752.5 I/s: 401.3 Sh: 1.99 1.00 76 +
2017-11-27 21.17.09| GPU1 62C Sol/s: 327.9 Sol/W: 3.27 Avg: 331.2 I/s: 176.4 Sh: 0.99 1.00 77
2017-11-27 21.17.09| ========== Sol/s: 1063.5 Sol/W: 3.25 Avg: 1083.6 I/s: 577.8 Sh: 2.99 1.00 76
2017-11-27 21.17.26| GPU0 57C Sol/s: 762.7 Sol/W: 3.24 Avg: 752.9 I/s: 401.2 Sh: 2.31 1.00 76 +++
2017-11-27 21.17.29| GPU1 63C Sol/s: 329.7 Sol/W: 3.27 Avg: 331.1 I/s: 174.5 Sh: 1.08 1.00 76 +
2017-11-27 21.17.29| ========== Sol/s: 1092.4 Sol/W: 3.25 Avg: 1084.0 I/s: 575.8 Sh: 3.40 1.00 76
2017-11-27 21.17.46| GPU0 58C Sol/s: 762.5 Sol/W: 3.24 Avg: 753.4 I/s: 401.0 Sh: 2.34 1.00 75 +
2017-11-27 21.17.49| GPU1 63C Sol/s: 325.6 Sol/W: 3.27 Avg: 330.9 I/s: 174.9 Sh: 1.17 1.00 76 +
2017-11-27 21.17.49| ========== Sol/s: 1088.1 Sol/W: 3.25 Avg: 1084.2 I/s: 575.9 Sh: 3.51 1.00 75
2017-11-27 21.18.06| GPU0 57C Sol/s: 745.8 Sol/W: 3.24 Avg: 753.0 I/s: 401.1 Sh: 2.24 1.00 75
2017-11-27 21.18.10| GPU1 63C Sol/s: 331.9 Sol/W: 3.27 Avg: 330.9 I/s: 175.0 Sh: 1.24 1.00 75 +
2017-11-27 21.18.10| ========== Sol/s: 1077.7 Sol/W: 3.25 Avg: 1083.9 I/s: 576.1 Sh: 3.49 1.00 75
2017-11-27 21.18.26| GPU0 57C Sol/s: 760.2 Sol/W: 3.24 Avg: 753.3 I/s: 401.3 Sh: 2.27 1.00 374 +
2017-11-27 21.18.30| GPU1 63C Sol/s: 323.0 Sol/W: 3.26 Avg: 330.6 I/s: 175.1 Sh: 1.31 1.00 75 +
2017-11-27 21.18.30| ========== Sol/s: 1083.2 Sol/W: 3.25 Avg: 1083.9 I/s: 576.4 Sh: 3.59 1.00 224
2017-11-27 21.18.46| GPU0 57C Sol/s: 758.9 Sol/W: 3.24 Avg: 753.5 I/s: 401.2 Sh: 2.30 1.00 75 +
2017-11-27 21.18.50| GPU1 63C Sol/s: 323.9 Sol/W: 3.26 Avg: 330.3 I/s: 173.3 Sh: 1.26 1.00 75
2017-11-27 21.18.50| ========== Sol/s: 1082.8 Sol/W: 3.25 Avg: 1083.9 I/s: 574.5 Sh: 3.56 1.00 75
2017-11-27 21.19.06|> GPU0 58C Sol/s: 745.8 Sol/W: 3.24 Avg: 753.3 I/s: 401.3 Sh: 2.33 1.00 75 +
2017-11-27 21.19.10|> GPU1 64C Sol/s: 327.6 Sol/W: 3.26 Avg: 330.2 I/s: 173.1 Sh: 1.32 1.00 75 +
2017-11-27 21.19.10| ========== Sol/s: 1073.4 Sol/W: 3.25 Avg: 1083.5 I/s: 574.4 Sh: 3.65 1.00 75
And what that "1"at end mean?
The total amount of accepted and rejected shares are accessible via the webui or by json-rpc. The '1' at the and denotes the ratio of accepted shares. Be aware that the numbers are rounded down - so a value of 0.99 may actually be something like 0.9999.. i.e. 99.9999...%.
how can i setup webui? and when i go to json-rpc file in miner its empty
when i set --telemetry and my IP that comes in IPv4 Address and my port it wont work?
November 28, 2017, 09:25:12 AM
i'm trying to use dstm miner, but whenever i want to run the .bat file, it opens and closes immediately
Can you mine bitcoin gold with the miner, its equihash right ...
This isn't rightCode:
zm --server stratum+tcp://btg.suprnova.cc --port 8816 --user Pr0ph3t.1 --pass x --logfile --list-devices 0 1 2 3 4 5
Can you mine bitcoin gold with the miner, its equihash right ...
Code:
--list-devices 0 1 2 3 4 5
Help from first topic page of ZM
--dev Space separated list of cuda devices
--list-devices List available cuda devices
You should use
Code:
--dev 0 1 2 3 4 5
Also if you want to mine with all cards on your rig just don't use --dev, it will select all available GPU's.
Also when you test out stuff, better put a "pause" at the end of the bat if the miner exit you have the error code or test directly from the cmdline for the same effect, also in the zm log you should have seen the error.
November 28, 2017, 09:14:35 AM
3x 6x1060
So thats 18 cards.
Each miner (6 cards) runs @550w - 1840-1850h/s. With EWFB i got 1720-1730
So per miner i'm getting +100 sols. So for the 3 miners i'm actually getting +300 sols more.
So basiclly i'm running EWFB miner with 19 cards instead of 18
So thats 18 cards.
Each miner (6 cards) runs @550w - 1840-1850h/s. With EWFB i got 1720-1730
So per miner i'm getting +100 sols. So for the 3 miners i'm actually getting +300 sols more.
So basiclly i'm running EWFB miner with 19 cards instead of 18
November 28, 2017, 09:06:41 AM
u get 300 sols more on 6x 1060 ?!
November 28, 2017, 08:40:48 AM
Already tried that, and same thing happens.
Okay, looks like i had to create another new .bat file, instead of using the one in the zm folder.
Really shocked i'm getting atm 300 more hash out of 3x 6x1060's.
Let's see how stable it it.
Is there a auto restart script we can use for this miner ?
Okay, looks like i had to create another new .bat file, instead of using the one in the zm folder.
Really shocked i'm getting atm 300 more hash out of 3x 6x1060's.
Let's see how stable it it.
Is there a auto restart script we can use for this miner ?
November 28, 2017, 08:34:05 AM
i'm trying to use dstm miner, but whenever i want to run the .bat file, it opens and closes immediately
Can you mine bitcoin gold with the miner, its equihash right ...
Code:
zm --server stratum+tcp://btg.suprnova.cc --port 8816 --user Pr0ph3t.1 --pass x --logfile --list-devices 0 1 2 3 4 5
Can you mine bitcoin gold with the miner, its equihash right ...
You should remove stratum+tcp, for example simply like this:
zm --server btg.suprnova.cc --port 8816 --user Pr0ph3t.1 --pass x --logfile --list-devices 0 1 2 3 4 5
November 28, 2017, 08:13:59 AM
i'm trying to use dstm miner, but whenever i want to run the .bat file, it opens and closes immediately
Can you mine bitcoin gold with the miner, its equihash right ...
Code:
zm --server stratum+tcp://btg.suprnova.cc --port 8816 --user Pr0ph3t.1 --pass x --logfile --list-devices 0 1 2 3 4 5
Can you mine bitcoin gold with the miner, its equihash right ...
Jump to: