Author

Topic: ⚡[ANN]⚡ ▐░Espers [ESP]░▌▐░PoW/PoS░▌▐░HMQ1725 Algo░▌ ▐░New Features░▌ - page 440. (Read 923924 times)

sr. member
Activity: 597
Merit: 253
... and the swarm is headed towards us
So now ESP must be swapped into ESP2.0 or its the same chain?
Sorry for not reading hundreds of pages back.

Yes, different chain so must be swapped. See the very first post for a visual guide to swapping at nova.
newbie
Activity: 40
Merit: 0
So now ESP must be swapped into ESP2.0 or its the same chain?
Sorry for not reading hundreds of pages back.
hero member
Activity: 752
Merit: 500
If this https://github.com/CryptoCoderz/Espers is the source for v2, would you please update something there so we're very clear about that? I know there are other repos labeled as "OLD" but that doesn't clarify that this is the "NEW" source for the new chain.
sr. member
Activity: 504
Merit: 250
askNFTY Team Account
When will you have the wallet off ESP 2.0?




@Everyone


Sorry for not having the new full installer released yet (with mining+CCS features enabled). We've just been catching up on work now that the swap is rolling and we can focus on a quite a few things that needed attention.

Github was updated with the correct Ports for hardcoded nodes. (Windows Client will be updated tomorrow morning as well)

Thank you all for sticking by us through this! You support is what we thrive on.




means, you can allready build it from github source, otherwise you have to wait a bit...

We're sticking with you no issues. You take enough time, rest well and prepare well before releasing the new wallet.
member
Activity: 62
Merit: 10
When will you have the wallet off ESP 2.0?




@Everyone


Sorry for not having the new full installer released yet (with mining+CCS features enabled). We've just been catching up on work now that the swap is rolling and we can focus on a quite a few things that needed attention.

Github was updated with the correct Ports for hardcoded nodes. (Windows Client will be updated tomorrow morning as well)

Thank you all for sticking by us through this! You support is what we thrive on.




means, you can allready build it from github source, otherwise you have to wait a bit...
sr. member
Activity: 1204
Merit: 252
When will you have the wallet off ESP 2.0?
member
Activity: 62
Merit: 10
is there allready a block explorer for esp2?
hero member
Activity: 561
Merit: 500
hero member
Activity: 525
Merit: 531
Dear  Novaexchange,

it would be good if you answer my email/pm, and we can talk about your big security bug what i found yesterday!

Thx,
Elbandi

If you found something send a email.. not a PM here.. Thanks  Smiley
Already did as soon as i found the bug, at 16:59 GMT.... but no answer from support@  Angry

I have never seen Novaexchange answer an email, ever ... I think their support@ address is being forwarded to /dev/null. Roll Eyes Personally I don't trust that site an inch any more, just hoping that they will not lose their ESP funds to a script kiddie again ...  Angry

There was a person who was blackmailing trying to force them to send them BTC. then they would tell them what there issue is. Really?? They responded to him if he was the one who did snapshots. There is one who was trying to help and one who was not. But If he was the one demanding btc they told that person to hit the road and fixed a minor bug.

The bug is fixed now, everyone can use novaexchange safely! Smiley
legendary
Activity: 2716
Merit: 1094
Black Belt Developer

EDIT2: it accepted the key but added a different address, so no coins :-(
Use both compressed and uncompressed privkey to import.

I tested the steps, and i got the same address in esp2.

YEAH that worked! :-)

gimme your esp2 address so I can tip you something ;-)

Are you saying that there is no need to use novaexchange to transfer ESP1 coin to ESP2 wallet ?

no, just that if you send from an ESP1 wallet to an ESP2 address, it will go thru, but there is a way to recover the coins.
hero member
Activity: 1330
Merit: 515
Coin Mage

EDIT2: it accepted the key but added a different address, so no coins :-(
Use both compressed and uncompressed privkey to import.

I tested the steps, and i got the same address in esp2.

YEAH that worked! :-)

gimme your esp2 address so I can tip you something ;-)

Are you saying that there is no need to use novaexchange to transfer ESP1 coin to ESP2 wallet ?

No he just recovered a private key for the ESP1 address. You still have to swap in order to switch to the new chain.
hero member
Activity: 661
Merit: 500

EDIT2: it accepted the key but added a different address, so no coins :-(
Use both compressed and uncompressed privkey to import.

I tested the steps, and i got the same address in esp2.

YEAH that worked! :-)

gimme your esp2 address so I can tip you something ;-)

Are you saying that there is no need to use novaexchange to transfer ESP1 coin to ESP2 wallet ?
legendary
Activity: 2716
Merit: 1094
Black Belt Developer

EDIT2: it accepted the key but added a different address, so no coins :-(
Use both compressed and uncompressed privkey to import.

I tested the steps, and i got the same address in esp2.

YEAH that worked! :-)

gimme your esp2 address so I can tip you something ;-)
hero member
Activity: 525
Merit: 531

EDIT2: it accepted the key but added a different address, so no coins :-(
Use both compressed and uncompressed privkey to import.

I tested the steps, and i got the same address in esp2.
legendary
Activity: 2716
Merit: 1094
Black Belt Developer
I just burned a lof of ESP1 by sending them to a ESP2 address!!!!

Tried importing the privkey from the ESP2 wallet to the ESP1 wallet but it says "invalid key".

The two addresses should REALLY have been incompatible! Or if they are, so should the private keys!!!
The privkey has different prefix (old: 161, new: 144).

Try this steps:
1. open http://www.universalwalletgenerator.net/ (or save the source+offline vm, etc.)
2. Setup:
Presets currency: Custom
Public address network version: 33
Private key prefix: 161

3. At "Wallet Details" tag, enter the privkey, and store somewhere the "Private Key Hexadecimal Format" value. (64 char)
4. Go setup again, and change the private key prefix to 144.
5. Back to "Wallet Details", enter the stored hex privkey, you get the right compressed privkey.



thanks very much mate!
unfortunately it doesn't seem to work: the settings are lost when I move to the "wallet details" tab.
tried both chrome and firefox.

EDIT: nevermind, I swapped 144 with 161 in your instructions and it worked ;-)

EDIT2: it accepted the key but added a different address, so no coins :-(
hero member
Activity: 525
Merit: 531
I just burned a lof of ESP1 by sending them to a ESP2 address!!!!

Tried importing the privkey from the ESP2 wallet to the ESP1 wallet but it says "invalid key".

The two addresses should REALLY have been incompatible! Or if they are, so should the private keys!!!
The privkey has different prefix (old: 161, new: 144).

Try this steps:
1. open http://www.universalwalletgenerator.net/ (or save the source+offline vm, etc.)
2. Setup:
Presets currency: Custom
Public address network version: 33
Private key prefix: 161

3. At "Wallet Details" tag, enter the privkey, and store somewhere the "Private Key Hexadecimal Format" value. (64 char)
4. Go setup again, and change the private key prefix to 144.
5. Back to "Wallet Details", enter the stored hex privkey, you get the right compressed privkey.

legendary
Activity: 1764
Merit: 1000
I don't use UPnP in my network, but the checkbox to disable it in the settings of the new ESP wallet is greyed out. Which port do I have to forward to make it work better? Or is there even a need to?

I do0'nt even bother touching those settings and leave them be as the default.
hero member
Activity: 1330
Merit: 515
Coin Mage
I don't use UPnP in my network, but the checkbox to disable it in the settings of the new ESP wallet is greyed out. Which port do I have to forward to make it work better? Or is there even a need to?

Edit: Default port seems to be 22447 22448 TCP. Do I have to prevent the wallet from trying UPnP, or is it enough to just forward the port?
Edit2: Forwarding this port gave me a significant increase in connections.
legendary
Activity: 1764
Merit: 1000
I just burned a lof of ESP1 by sending them to a ESP2 address!!!!

Tried importing the privkey from the ESP2 wallet to the ESP1 wallet but it says "invalid key".

The two addresses should REALLY have been incompatible! Or if they are, so should the private keys!!!

Sorry to hear that Pallas, thats why I am also anxious when trying to open both ESP wallets at the same time, worried to mix the two when trying to send some coins.
legendary
Activity: 2716
Merit: 1094
Black Belt Developer
I just burned a lof of ESP1 by sending them to a ESP2 address!!!!

Tried importing the privkey from the ESP2 wallet to the ESP1 wallet but it says "invalid key".

The two addresses should REALLY have been incompatible! Or if they are, so should the private keys!!!
Jump to: