[ANN] GamerholicCoin (GHC) [SHA-256] - Fair launch! - I WIN FOR A LIVING - page 20.

HunterS

hero member

Activity: 644

Merit: 500

Quote from: ocminer on September 28, 2014, 07:29:56 AM

Quote from: Mrriddick on September 28, 2014, 07:25:09 AM

Minerspools Current block: 2,887 Current Difficulty 7,347,256.21335543
Supernova Current block: 2,898 Current Difficulty 10,040,773.77386921

WTF Huh

I'm on the latest version from github..

Which is the correct fork ? The one with the higher diff ?

minerpool was also updated.this is just turning into one big joke.im going back neos mining.
the correct fork will be what ever it picks when it automaticly fixes itself Grin

Dramm

newbie

Activity: 27

Merit: 0

are payments from an http://ghc.bitops.me/ paid correctly?

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: Mrriddick on September 28, 2014, 07:25:09 AM

Minerspools Current block: 2,887 Current Difficulty 7,347,256.21335543
Supernova Current block: 2,898 Current Difficulty 10,040,773.77386921

WTF Huh

I'm on the latest version from github..

Which is the correct fork ? The one with the higher diff ?

Mrriddick

full member

Activity: 203

Merit: 100

Minerspools Current block: 2,887 Current Difficulty 7,347,256.21335543
Supernova Current block: 2,898 Current Difficulty 10,040,773.77386921

WTF Huh

pvnamk19

full member

Activity: 178

Merit: 100

Quote from: lin0sspice on September 28, 2014, 06:55:21 AM

What is conf file ?
gamerholiccoin.conf ?

I use this name GamerholicCoin.conf with the below info:

addnode=node.minerpools.com
addnode=ghc.suprnova.cc
addnode = 37.59.18.108
addnode = 192.155.89.136
addnode = ghc.longwall.io
addnode = 138.91.112.229
addnode = 23.99.3.224
rpcport= 12326

BTW, also check this info from Dev.:
When you say "fresh" you need to delete the peers.dat file and txleveldb directory or else you will still be on the wrong chain.
Delete nothing else. Put the addnodes from the OP in your conf file. Run the program again and it will sync properly.

lin0sspice

legendary

Activity: 1190

Merit: 1002

What is conf file ?
gamerholiccoin.conf ?

pvnamk19

full member

Activity: 178

Merit: 100

Thanks jyap so much!
You save alot of time and BTC for this community.

coinweaver

full member

Activity: 176

Merit: 100

We are working around the official node since it's receiving so many request from bad clients. The addnodes have been updated in the OP to reflect as jyap indicated.

scorpio25

member

Activity: 266

Merit: 10

The Experience Layer of the Decentralized Interne

Quote from: ocminer on September 28, 2014, 05:19:34 AM

Quote from: scorpio25 on September 28, 2014, 05:18:06 AM

Quote from: Cr@zyheo on September 28, 2014, 05:15:14 AM

Quote from: scorpio25 on September 28, 2014, 05:10:41 AM

Hello

Right now i'm updating again the wallet and try to resync on the right fork, i hope with this update will be ok if not and my pool go again on other fork i will stop the stratum and close the pool.

For the moment the stratum from coinminers pool is down until i update the pool and sync on the right fork.

Regards

When you say "fresh" you need to delete the peers.dat file and txleveldb directory or else you will still be on the wrong chain.

Delete nothing else. Put the addnodes from the OP in your conf file. Run the program again and it will sync properly.

I have done that but still i sync on the wrong fork and i can not connect with the node from the op

Code:

trying connection 146.148.60.58:12325 lastseen=82.8hrs
connected 146.148.60.58:12325
send version message: version 60001, blocks=0, us=*******, them=146.148.60.58:12325, peer=146.148.60.58:12325
socket closed
disconnecting node 146.148.60.58:12325

Did you try ghc.suprnova.cc as node ?

Yes right now my wallet is synced to the right fork and this is my peer info and still i can not connect to the official node

Code:

[
   {
   "addr" : "37.59.18.108:12325",
   "services" : "00000001",
   "lastsend" : 1411899578,
   "lastrecv" : 1411899678,
   "conntime" : 1411899513,
   "version" : 60001,
   "subver" : "/CG:1.0.0.1/",
   "inbound" : false,
   "startingheight" : 2811,
   "banscore" : 0
   },
   {
   "addr" : "108.231.88.101:61633",
   "services" : "00000001",
   "lastsend" : 1411899678,
   "lastrecv" : 1411899678,
   "conntime" : 1411899551,
   "version" : 60001,
   "subver" : "/CG:1.0.0.1/",
   "inbound" : true,
   "startingheight" : 2811,
   "banscore" : 0
   },
   {
   "addr" : "86.141.231.233:12325",
   "services" : "00000001",
   "lastsend" : 1411899678,
   "lastrecv" : 1411899678,
   "conntime" : 1411899596,
   "version" : 60001,
   "subver" : "/CG:1.0.0.1/",
   "inbound" : false,
   "startingheight" : 2812,
   "banscore" : 0
   },
   {
   "addr" : "189.208.153.155:54608",
   "services" : "00000001",
   "lastsend" : 1411899678,
   "lastrecv" : 1411899678,
   "conntime" : 1411899664,
   "version" : 60001,
   "subver" : "/CG:1.0.0.1/",
   "inbound" : true,
   "startingheight" : 2812,
   "banscore" : 0

Now i need to orphan some blocks from the wrong fork damn

ocminer

legendary

Activity: 2688

Merit: 1240

Quote from: scorpio25 on September 28, 2014, 05:18:06 AM

Quote from: Cr@zyheo on September 28, 2014, 05:15:14 AM

Quote from: scorpio25 on September 28, 2014, 05:10:41 AM

Hello

Right now i'm updating again the wallet and try to resync on the right fork, i hope with this update will be ok if not and my pool go again on other fork i will stop the stratum and close the pool.

For the moment the stratum from coinminers pool is down until i update the pool and sync on the right fork.

Regards

When you say "fresh" you need to delete the peers.dat file and txleveldb directory or else you will still be on the wrong chain.

Delete nothing else. Put the addnodes from the OP in your conf file. Run the program again and it will sync properly.

I have done that but still i sync on the wrong fork and i can not connect with the node from the op

Code:

trying connection 146.148.60.58:12325 lastseen=82.8hrs
connected 146.148.60.58:12325
send version message: version 60001, blocks=0, us=*******, them=146.148.60.58:12325, peer=146.148.60.58:12325
socket closed
disconnecting node 146.148.60.58:12325

Did you try ghc.suprnova.cc as node ?

Cr@zyheo

newbie

Activity: 25

Merit: 0

Quote from: scorpio25 on September 28, 2014, 05:10:41 AM

Hello

Right now i'm updating again the wallet and try to resync on the right fork, i hope with this update will be ok if not and my pool go again on other fork i will stop the stratum and close the pool.

For the moment the stratum from coinminers pool is down until i update the pool and sync on the right fork.

Regards

When you say "fresh" you need to delete the peers.dat file and txleveldb directory or else you will still be on the wrong chain.

Delete nothing else. Put the addnodes from the OP in your conf file. Run the program again and it will sync properly.

scorpio25

member

Activity: 266

Merit: 10

The Experience Layer of the Decentralized Interne

Quote from: Cr@zyheo on September 28, 2014, 05:15:14 AM

Quote from: scorpio25 on September 28, 2014, 05:10:41 AM

Hello

Right now i'm updating again the wallet and try to resync on the right fork, i hope with this update will be ok if not and my pool go again on other fork i will stop the stratum and close the pool.

For the moment the stratum from coinminers pool is down until i update the pool and sync on the right fork.

Regards

When you say "fresh" you need to delete the peers.dat file and txleveldb directory or else you will still be on the wrong chain.

Delete nothing else. Put the addnodes from the OP in your conf file. Run the program again and it will sync properly.

I have done that but still i sync on the wrong fork and i can not connect with the node from the op

Code:

trying connection 146.148.60.58:12325 lastseen=82.8hrs
connected 146.148.60.58:12325
send version message: version 60001, blocks=0, us=*******, them=146.148.60.58:12325, peer=146.148.60.58:12325
socket closed
disconnecting node 146.148.60.58:12325

UPDATE: Finaly i synced the wallet to the right chain

scorpio25

member

Activity: 266

Merit: 10

The Experience Layer of the Decentralized Interne

Hello

Right now i'm updating again the wallet and try to resync on the right fork, i hope with this update will be ok if not and my pool go again on other fork i will stop the stratum and close the pool.

For the moment the stratum from coinminers pool is down until i update the pool and sync on the right fork.

P.S: Again i can not connect to the node from the op

Code:

trying connection 146.148.60.58:12325 lastseen=82.8hrs
connected 146.148.60.58:12325
send version message: version 60001, blocks=0, us=*******, them=146.148.60.58:12325, peer=146.148.60.58:12325
socket closed
disconnecting node 146.148.60.58:12325

Regards

coinweaver

full member

Activity: 176

Merit: 100

Quote from: proletariat on September 28, 2014, 04:19:54 AM

Quote from: coinweaver on September 28, 2014, 04:15:03 AM

Coin-miners is on the wrong chain.

Redownloaded the updated wallet earlier and installed fresh but it's apparently on the same block as coin-miners. What to do?

When you say "fresh" you need to delete the peers.dat file and txleveldb directory or else you will still be on the wrong chain.

Delete nothing else. Put the addnodes from the OP in your conf file. Run the program again and it will sync properly.

Cr@zyheo

newbie

Activity: 25

Merit: 0

Quote from: proletariat on September 28, 2014, 04:25:38 AM

Quote from: studio1one on September 28, 2014, 04:23:58 AM

Quote from: proletariat on September 28, 2014, 04:19:54 AM

Quote from: coinweaver on September 28, 2014, 04:15:03 AM

Coin-miners is on the wrong chain.

Redownloaded the updated wallet earlier and installed fresh but it's apparently on the same block as coin-miners. What to do?

Disconnect from internet Delete blockchain add correct nodes reconnect to network

Thank you.

please stop stratum and update

proletariat

legendary

Activity: 1246

Merit: 1005

Quote from: studio1one on September 28, 2014, 04:23:58 AM

Quote from: proletariat on September 28, 2014, 04:19:54 AM

Quote from: coinweaver on September 28, 2014, 04:15:03 AM

Coin-miners is on the wrong chain.

Redownloaded the updated wallet earlier and installed fresh but it's apparently on the same block as coin-miners. What to do?

Disconnect from internet Delete blockchain add correct nodes reconnect to network

Thank you.

studio1one

hero member

Activity: 1218

Merit: 500

BintexFutures

Quote from: proletariat on September 28, 2014, 04:19:54 AM

Quote from: coinweaver on September 28, 2014, 04:15:03 AM

Coin-miners is on the wrong chain.

Redownloaded the updated wallet earlier and installed fresh but it's apparently on the same block as coin-miners. What to do?

Disconnect from internet Delete blockchain add correct nodes reconnect to network

Cr@zyheo

newbie

Activity: 25

Merit: 0

Quote from: proletariat on September 28, 2014, 04:19:54 AM

Quote from: coinweaver on September 28, 2014, 04:15:03 AM

Coin-miners is on the wrong chain.

Redownloaded the updated wallet earlier and installed fresh but it's apparently on the same block as coin-miners. What to do?

all automatic change to orphan

proletariat

legendary

Activity: 1246

Merit: 1005

Quote from: coinweaver on September 28, 2014, 04:15:03 AM

Coin-miners is on the wrong chain.

Redownloaded the updated wallet earlier and installed fresh but it's apparently on the same block as coin-miners. What to do?

proletariat

legendary

Activity: 1246

Merit: 1005

Quote from: coinweaver on September 28, 2014, 04:15:03 AM

Quote from: proletariat on September 28, 2014, 04:14:11 AM

Minerpools Next Network Block    2,767 (Current: 2,766)

Suprnova Next Network Block    2,767 (Current: 2,766)

----------------------------------------------------------

coin-miners Next Network Block    2,795 (Current: 2,794)

Is this correct? is it forked?

Coin-miners is on the wrong chain.

Thanks.

Topic: [ANN] GamerholicCoin (GHC) [SHA-256] - Fair launch! - I WIN FOR A LIVING - page 20. (Read 80342 times)