The local wallet (Garlium) has changed it's address. The balance is correct but I can't find it in the explorer https://explorer.garlicoin.io/
What is the problem?
UPDATE: in fact it didn't change. But the receiving address is different from the address that I inserted in the bat file when mining... strange
Topic: [ANN] GARLICOIN - Reddit's Garlic Bread Worshiping Currency - page 23. (Read 35732 times)
The first one who posted here is Onion now, there is a garlic, I will develop a ginger coin, chili coin, broccoli coin, pepper coin etc 
by the way interesting project!
I think you better develop bread coin. It would go hand in hand with Garlicoin. Perhaps make it merge minable with GRLC for extra credit. You should then also go for oregano coin and perhaps even olive oil coin. All great garlic bread ingredients. by the way interesting project!
Yeah sure, that's great idea man you have a brilliant mind, by the way if I begin to start the project I will going to ask your consultancy.. lol!
I am not able to add T56x20 it says its not an option? 
The first one who posted here is Onion now, there is a garlic, I will develop a ginger coin, chili coin, broccoli coin, pepper coin etc
by the way interesting project!
I think you better develop bread coin. It would go hand in hand with Garlicoin. Perhaps make it merge minable with GRLC for extra credit. You should then also go for oregano coin and perhaps even olive oil coin. All great garlic bread ingredients. by the way interesting project!
Hodl your garlic guys, or you'll regret it very soon.. 
The first one who posted here is Onion now, there is a garlic, I will develop a ginger coin, chili coin, broccoli coin, pepper coin etc
by the way interesting project!
by the way interesting project!
Quote
Thanks a ton guys. I'm getting 640s now after putting T56x20 and bumping mem to +500. I will try higher mem boost in a bit when I can be here to watch it and make sure it's stable. Can't believe I didn't try that before. I think because I tried boosting mem with equihash before and it wasn't stable, but diff algo must just be different. It could have been the core though, I was messing with both at the time. Been out of the game a while and back in now.
lookup-gap higher than 2 lowered hashrate, but possibly just would need more tweaking of other settings to fine tune.
Guessing now I could go higher if I lifted the undervolt but I'll keep it the way it is, these suckers produce some serious heat at stock settings. Got a nice setup with exhaust going out a window, but still want to keep things operating on the cooler side. 640s over 450s makes me happy.
Yeah I noticed bumping from T56x16 to T56x20 boosted the cuda threads, nice.
For now I'm still going to mine and hold my coins. Looks like a couple peeps just dumped some shares and then the panic sells came in.
i cant increase look-gap higher than 2.. it says out of memory
Thanks man. Is that the skunkhash one? I tried it but nothing happens, it just sits. Using the other miner I did what you said and got t55x12, but with it hash is 450 even with 1 gpu. Yeah when I do them all, the threads and warps are different, but the hashes are all about the same at 441-450. 590's would be ok with me, that's a good step up.
using this miner: https://github.com/palginpav/ccminer/releases/tag/2.0-bitcore.v3
Think it might be the miner. I can try boosting the ram if it comes to it, would take a few days. with all 8 running it shows 2.6 out of 7.9 usage, virtual mem at 43101.
Maybe it's the intensity? It always sets to around 14 and the program ignores any -i flags that I put in there.
**edit, added --lookup-gap 2 and getting all 590's now, much better, forgot about that. still room to improve. got T56x16 now, whatever those numbers mean.
The ccminer from palginpav version doesn't matter, there have been no commits or updates for Nscrypt for years either way use the most recent if it does for you.
I know that all RAM is not showing as utilised, nor was mine. Showing 400mb usage at 4GB in the system and 400mb with 8GB in but wildly better performance.
Excellent news, for 1080ti you should try lookup-gap 3.6 maybe a bit more extra.
I have seen many people claiming 700/720/750khz with a 1080ti so I know my config must be whack.
That's pretty good man, do you mind if I ask your settings? I can't seem to get more than 450 per 1080ti. Running i7 8600 with 8 gpu, win10x64 ltsb, 8GB ram, 120GB SSD, 60GB virtual mem space. CPU clock is at 4.26 on all cores, 8 threads fully maxed. GPU clock at 1898, ram at 5005, undervolted to 900mv. That's the timetravel miner right?
You can also try adding -D in your config and 'pause' at the end so you can see for yourself the hashrate per combination. It's pretty quick, I did some autotuning myself and improved my hashrate in a few minutes. The best for my GPUs (also 1080 Ti) is T56x20. Some notable configs are T24x20, T28x16, T28x20 and T56x16.
Also memory is a big factor here so try overclocking memory. I have mine at 1607mhz core and 5702 memory gives me 650 kh/s+.
Good luck!
EDIT: Also make sure you're running the x64 version of ccminer 2.2.4
Thanks a ton guys. I'm getting 640s now after putting T56x20 and bumping mem to +500. I will try higher mem boost in a bit when I can be here to watch it and make sure it's stable. Can't believe I didn't try that before. I think because I tried boosting mem with equihash before and it wasn't stable, but diff algo must just be different. It could have been the core though, I was messing with both at the time. Been out of the game a while and back in now.
lookup-gap higher than 2 lowered hashrate, but possibly just would need more tweaking of other settings to fine tune.
Guessing now I could go higher if I lifted the undervolt but I'll keep it the way it is, these suckers produce some serious heat at stock settings. Got a nice setup with exhaust going out a window, but still want to keep things operating on the cooler side. 640s over 450s makes me happy.
Yeah I noticed bumping from T56x16 to T56x20 boosted the cuda threads, nice.
Now Garlicoin officially dead - dev dump their coins on exchanges instead of airdrop.
Since the project is very much centered around the Reddit community, the devs want to give out coins to early subscribers of the subreddit community. But Reddit's Oauth caved under the heavy load so the devs are now trying to find different avenues to facilitate the airdrop under and still make it fair. You can watch airdrop addresses from the explorer's rich list. The addresses of the airdrop are marked as such. https://garli.co.in/richlist explorer is down atm
Now Garlicoin officially dead - dev dump their coins on exchanges instead of airdrop.
Since the project is very much centered around the Reddit community, the devs want to give out coins to early subscribers of the subreddit community. But Reddit's Oauth caved under the heavy load so the devs are now trying to find different avenues to facilitate the airdrop under and still make it fair. You can watch airdrop addresses from the explorer's rich list. The addresses of the airdrop are marked as such. https://garli.co.in/richlist 
Hi! Have you switched from trolling of BitcoinZ to trolling of Garlic? Can you prove your words? There are no backgrounds for your words on the exchanges. Or maybe you just need a processor Core i7
There are hundreds of spammers, Fudders around the forum. Don't care about them, please prepare appropritate knowledge for your own judgements, and important decisions.Now Garlicoin officially dead - dev dump their coins on exchanges instead of airdrop.
I fear you underestimate the extent of the faggot horde on this forum. It's thousands and thousands of idiots posting crap all day here.
Hi! Have you switched from trolling of BitcoinZ to trolling of Garlic? Can you prove your words? There are no backgrounds for your words on the exchanges. Or maybe you just need a processor Core i7
There are hundreds of spammers, Fudders around the forum. Don't care about them, please prepare appropritate knowledge for your own judgements, and important decisions. Now Garlicoin officially dead - dev dump their coins on exchanges instead of airdrop.
Hello! Thanks! Configs T56x16 have helped me greatly to get results with 30 KH/s more than I had before.
You can also try adding -D in your config and 'pause' at the end so you can see for yourself the hashrate per combination. It's pretty quick, I did some autotuning myself and improved my hashrate in a few minutes. The best for my GPUs (also 1080 Ti) is T56x20. Some notable configs are T24x20, T28x16, T28x20 and T56x16.
Also memory is a big factor here so try overclocking memory. I have mine at 1607mhz core and 5702 memory gives me 650 kh/s+.
Good luck!
EDIT: Also make sure you're running the x64 version of ccminer 2.2.4
That's pretty good man, do you mind if I ask your settings? I can't seem to get more than 450 per 1080ti. Running i7 8600 with 8 gpu, win10x64 ltsb, 8GB ram, 120GB SSD, 60GB virtual mem space. CPU clock is at 4.26 on all cores, 8 threads fully maxed. GPU clock at 1898, ram at 5005, undervolted to 900mv. That's the timetravel miner right?
You can also try adding -D in your config and 'pause' at the end so you can see for yourself the hashrate per combination. It's pretty quick, I did some autotuning myself and improved my hashrate in a few minutes. The best for my GPUs (also 1080 Ti) is T56x20. Some notable configs are T24x20, T28x16, T28x20 and T56x16.
Also memory is a big factor here so try overclocking memory. I have mine at 1607mhz core and 5702 memory gives me 650 kh/s+.
Good luck!
EDIT: Also make sure you're running the x64 version of ccminer 2.2.4
Hi! Have you switched from trolling of BitcoinZ to trolling of Garlic? Can you prove your words? There are no backgrounds for your words on the exchanges. Or maybe you just need a processor Core i7
Now Garlicoin officially dead - dev dump their coins on exchanges instead of airdrop.
this project has a serious smell... ^^
Which kind of smell dis you mean? I am a little bit curious about the smell. Now Garlicoin officially dead - dev dump their coins on exchanges instead of airdrop.
Where did you learn that Garlicoin was about to disappear, that it would become worthless? thank you I will try it I had -d in it previously
can you please paste in your settings for smos. also which miner are you using ?
this project has a serious smell... ^^
That's pretty good man, do you mind if I ask your settings? I can't seem to get more than 450 per 1080ti. Running i7 8600 with 8 gpu, win10x64 ltsb, 8GB ram, 120GB SSD, 60GB virtual mem space. CPU clock is at 4.26 on all cores, 8 threads fully maxed. GPU clock at 1898, ram at 5005, undervolted to 900mv. That's the timetravel miner right?
You can also try adding -D in your config and 'pause' at the end so you can see for yourself the hashrate per combination. It's pretty quick, I did some autotuning myself and improved my hashrate in a few minutes. The best for my GPUs (also 1080 Ti) is T56x20. Some notable configs are T24x20, T28x16, T28x20 and T56x16.
Also memory is a big factor here so try overclocking memory. I have mine at 1607mhz core and 5702 memory gives me 650 kh/s+.
Good luck!
thank you I will try it I had -d in it previously
can you please paste in your settings for smos. also which miner are you using ?
That's pretty good man, do you mind if I ask your settings? I can't seem to get more than 450 per 1080ti. Running i7 8600 with 8 gpu, win10x64 ltsb, 8GB ram, 120GB SSD, 60GB virtual mem space. CPU clock is at 4.26 on all cores, 8 threads fully maxed. GPU clock at 1898, ram at 5005, undervolted to 900mv. That's the timetravel miner right?
You can also try adding -D in your config and 'pause' at the end so you can see for yourself the hashrate per combination. It's pretty quick, I did some autotuning myself and improved my hashrate in a few minutes. The best for my GPUs (also 1080 Ti) is T56x20. Some notable configs are T24x20, T28x16, T28x20 and T56x16.
Also memory is a big factor here so try overclocking memory. I have mine at 1607mhz core and 5702 memory gives me 650 kh/s+.
Good luck!
EDIT: Also make sure you're running the x64 version of ccminer 2.2.4
Jump to: