Hello. I bought XGTC from Yobit on January 10th. And I sent it to Coinexchange. But that did not arrive at this moment. I contacted Coinexchange and their answer came. I have captured my question and answer.
https://imgur.com/6gnidn2
I think there's a problem with the coin's block chain network. And this is the problem you guys have to solve. Although it is a small amount of money, I have tremendous stress for a week. Not only me, but there are people who are having trouble with this problem. I want you guys to show you the responsibility for the coin purchasers. I hope you solve this problem soon.
Topic: [ANN] GirlsToken-2.0 - 2.3-ALPHA in testing now[ANN] - page 4. (Read 25539 times)
Miners are choosing their favorite ways to dig it, and you can vote.
hey hacker - the way I dug your mom's back out this morning
Hi Dev.
Wallet not syns.
new ver not syns.
Pls fix addnos.
Thank you so much.
Wallet not syns.
new ver not syns.
Pls fix addnos.
Thank you so much.
Miners are choosing their favorite ways to dig it, and you can vote.
Finally got some time to mess around with this coin again, but ran into the problem were I was completley unable to connect to the network. Is the whole thing down, or am I doing somethig wrong again? I saw a huge list of IPs eariler, and fed that to my daemon, but none came back as active...
Try, before make:
Code:
mkdir obj obj/zerocoin
That did it, thank you very much! I knew it was something simple...
Hello, I've been trying to compile the unix headless binaries per the doc in an Ubuntu container (same base container I've used to build numerous other coin code) with all listed pre-reqs, but the make fails immdiately:
root@6e14f56a7f01:~/gtoken/src# make -f makefile.unix
g++ -c -O2 -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -I/root/gtoken/src -I/root/gtoken/src/obj -DUSE_UPNP=1 -I/root/gtoken/src/leveldb/include -I/root/gtoken/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/alert.d -o obj/alert.o alert.cpp
alert.cpp:273:1: fatal error: opening dependency file obj/alert.d: No such file or directory
}
^
compilation terminated.
makefile.unix:167: recipe for target 'obj/alert.o' failed
make: *** [obj/alert.o] Error 1
I didn't jump straight to opening an issue as perhaps I've missed something simple, anyone here have experience compiling this?
root@6e14f56a7f01:~/gtoken/src# make -f makefile.unix
g++ -c -O2 -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -I/root/gtoken/src -I/root/gtoken/src/obj -DUSE_UPNP=1 -I/root/gtoken/src/leveldb/include -I/root/gtoken/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/alert.d -o obj/alert.o alert.cpp
alert.cpp:273:1: fatal error: opening dependency file obj/alert.d: No such file or directory
}
^
compilation terminated.
makefile.unix:167: recipe for target 'obj/alert.o' failed
make: *** [obj/alert.o] Error 1
I didn't jump straight to opening an issue as perhaps I've missed something simple, anyone here have experience compiling this?
Try, before make:
Code:
mkdir obj obj/zerocoin
Hello, I've been trying to compile the unix headless binaries per the doc in an Ubuntu container (same base container I've used to build numerous other coin code) with all listed pre-reqs, but the make fails immdiately:
root@6e14f56a7f01:~/gtoken/src# make -f makefile.unix
g++ -c -O2 -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -I/root/gtoken/src -I/root/gtoken/src/obj -DUSE_UPNP=1 -I/root/gtoken/src/leveldb/include -I/root/gtoken/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/alert.d -o obj/alert.o alert.cpp
alert.cpp:273:1: fatal error: opening dependency file obj/alert.d: No such file or directory
}
^
compilation terminated.
makefile.unix:167: recipe for target 'obj/alert.o' failed
make: *** [obj/alert.o] Error 1
I didn't jump straight to opening an issue as perhaps I've missed something simple, anyone here have experience compiling this?
root@6e14f56a7f01:~/gtoken/src# make -f makefile.unix
g++ -c -O2 -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -I/root/gtoken/src -I/root/gtoken/src/obj -DUSE_UPNP=1 -I/root/gtoken/src/leveldb/include -I/root/gtoken/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/alert.d -o obj/alert.o alert.cpp
alert.cpp:273:1: fatal error: opening dependency file obj/alert.d: No such file or directory
}
^
compilation terminated.
makefile.unix:167: recipe for target 'obj/alert.o' failed
make: *** [obj/alert.o] Error 1
I didn't jump straight to opening an issue as perhaps I've missed something simple, anyone here have experience compiling this?
wallet v2.2.1.0-g no synh. It`s last version or no?
Yobit uses old wallet version
What should I do now?
It is not your fault. I did the same. Yobit is still in old chain?! Bullshit. But I sent around 100 coins to check the deposit as I do not like yobit and I was saved. May be you did not notice the warning in OP. Dev already posted not to trade in yobit. Yobit is world's most shittest exchange.
Nothing - unless wonder happen and they update wallet. Coins are lost.
Yobit uses old wallet version
What should I do now?
Yobit uses old wallet version
Hi! Can somebody help me? I sent XGTC from yobit to coinexchanger
tx f7309f4925dacf08a192575f6e1faf3ac2ee7b45032e61395c14a534bb564f30
money not received in wallet coinexchander, where can I see block explorer ? Thanks!
tx f7309f4925dacf08a192575f6e1faf3ac2ee7b45032e61395c14a534bb564f30
money not received in wallet coinexchander, where can I see block explorer ? Thanks!
Is any information about masternode cost?
anyone have a link to a working explorer or coin count for this? please and thank you; the one in the op doesn't work for me.
This coin will be full of new features it will surely have a pump when they will be ready...
not getting any connections to wallet
used addnodes
used addnodes
list from everyone else and mine added im sure there are duplicates deal with it lol
addnode=165.227.51.119
addnode=67.205.143.226
addnode=72.231.170.74
addnode=74.70.214.94
addnode=coinsmarkets.com:10665
addnode=88.99.173.100:10665
addnode=51.15.164.53:10665
addnode=86.168.146.198:10665
addnode=125.2.158.146:10665
addnode=108.170.155.84:10665
addnode=45.21.57.92
addnode=2602:302:d153:95c0:657c:67b5:b0cf:eea7
addnode=84.117.32.131
addnode=98.238.231.31
addnode=83.36.141.163
addnode=2001:0:9d38:953c:24c2:3901:acdb:725c
addnode=2601:602:cf80:3552:a03d:a641:fcd7:71cd
addnode=93.115.61.74
addnode=86.168.146.198
addnode=73.42.210.148
addnode=125.2.158.146
addnode=136.243.89.142
addnode=5.44.170.146
addnode=51.15.164.53
addnode=78.11.4.9
addnode=2600:8805:a007:fb00:464:7ffc:7c03:1ba3
addnode=85.236.188.28
addnode=91.90.235.216
addnode=95.104.241.9
addnode=72.209.10.20
addnode=108.170.155.84:62181
addnode=195.162.78.85:60594
addnode=203.76.223.106:56119
addnode=24.220.149.200:64335
addnode=31.16.166.251:61491
addnode=45.21.57.92:62535
addnode=5.44.170.146:51493
addnode=51.15.164.53:49610
addnode=70.27.72.248:51170
addnode=72.209.10.20:62616
addnode=81.15.179.42:49794
addnode=81.15.179.42:53485
addnode=81.15.179.42:58926
addnode=83.40.147.214:60861
addnode=83.41.131.135:63794
addnode=88.99.173.100:46703
addnode=91.90.235.216:56092
addnode=93.115.61.74:51429
addnode=95.104.251.25:62433
addnode=142.196.81.147:49729
addnode=163.172.104.9:50582
addnode=189.12.34.202:50006
addnode=201.211.90.231:58539
addnode=24.220.149.200:50456
addnode=24.220.149.200:55229
addnode=24.220.149.200:58224
addnode=5.44.170.146:56784
addnode=[2001:48f8:28:11e::b]:10665
addnode=107.161.95.108:10665
addnode=[2001:48f8:28:11e:de0:f601:a1e2:54b2]:50536
addnode=[2001:0:5ef5:79fd:3852:b6:362c:a518]:61719
addnode=88.99.173.100:10665
addnode=51.15.164.53:10665
addnode=86.168.146.198:10665
addnode=125.2.158.146:10665
addnode=108.170.155.84:10665
not getting any connections to wallet
used addnodes
used addnodes
Hi dev, how are you? I know you are already a busy person but now a days it seems you have no time at all. I want to know, what are the active pool for xgtc mining ? I tried lpool and yiimp pool but was not able to mine the coin. And give us some update on your wallet update
Hello malekbaba, and all community
I wanted to provide some updates to let everyone know what progress is being made, complete with screen shots
1st- I have registered "girlstoken.org" and am building us a nice, slick, html5 info page for the upcoming release (images below):
2nd- I have a fully working scrypt masternode wallet, that is technically ready for release, however there are no true innovations at this point to set us apart. I have managed to successfully build a version with a basic, 2 algo "multi-algo pow" setup, which is building and being tested now. (untested linux-qt pics below):
Currently included, and being tested is scrypt and xevan algos. With plans to add a few more including skein2 and phi1612 after the current code is fully tested and deemed working.
Happy holidays to all
Amazing. It is a matter of great joy when we see dev is working hard to overcome and working towards specific goal. True to say, a friend of mine told me about this project. He assured me that dev is a wonderful person. May be we will not get a lot of money from it but at least we have honest dev, very nice community and we prefer development over money.
Jump to: