[ANN] [GLB]Globe – One Currency for One Globe - Polished and Ready for Action - page 52.

bcfanminer

member

Activity: 117

Merit: 10

Report my status:

1. The 200 BETs sent from sphere are finally confirmed.
2. The rewards from my mined blocks since five hours ago seem good.
3. The rewards from my mined blocks five hours ago are unconfirmed.

I hope my mined blocks are not dropped any more.

Tranz

legendary

Activity: 1540

Merit: 1060

May the force bit with you.

Quote from: roozifus on December 09, 2013, 07:39:25 PM

Quote from: Tranz on December 09, 2013, 07:12:53 PM

I have an win client for you.

Can I get the current block count and diff. so I can sure it matches.

{
"version" : 80300,
"protocolversion" : 70001,
"walletversion" : 60000,
"balance" : "108.99675052",
"blocks" : 16079,
"timeoffset" : 0,
"connections" : 2,
"proxy" : "",
"difficulty" : 2402.91565657,
"testnet" : false,
"keypoololdest" : 1386385708,
"keypoolsize" : 103,
"paytxfee" : "0.00",
"errors" : ""
}

I can't access the dubug console on ubuntu at the moment but my current block count is 16155 (so yours looks right).

And bfgminer is giving me a diff of 1.97k (i think it just changed down from 2.4k) so yours looks correct there too.

Ok I both picked up where I was on the block chain and did a fresh start, both are the same. Plus the interest seems to have stopped.

I am still not sure if this can be used for Mining for not.

$ md5sum Globe-Qt.rar
70b663b924c5a33def36fccb237bd308

http://www.megafileupload.com/en/file/477137/Globe-Qt-rar.html

Good luck!

If want to donate 1NdQhNK52haofr98GippFvjkePmHS3EhVn

roozifus

sr. member

Activity: 249

Merit: 250

Quote from: Tranz on December 09, 2013, 07:12:53 PM

I have an win client for you.

Can I get the current block count and diff. so I can sure it matches.

{
"version" : 80300,
"protocolversion" : 70001,
"walletversion" : 60000,
"balance" : "108.99675052",
"blocks" : 16079,
"timeoffset" : 0,
"connections" : 2,
"proxy" : "",
"difficulty" : 2402.91565657,
"testnet" : false,
"keypoololdest" : 1386385708,
"keypoolsize" : 103,
"paytxfee" : "0.00",
"errors" : ""
}

I can't access the dubug console on ubuntu at the moment but my current block count is 16155 (so yours looks right).

And bfgminer is giving me a diff of 1.97k (i think it just changed down from 2.4k) so yours looks correct there too.

Tranz

legendary

Activity: 1540

Merit: 1060

May the force bit with you.

I have an win client for you.

Can I get the current block count and diff. so I can sure it matches.

{
"version" : 80300,
"protocolversion" : 70001,
"walletversion" : 60000,
"balance" : "108.99675052",
"blocks" : 16079,
"timeoffset" : 0,
"connections" : 2,
"proxy" : "",
"difficulty" : 2402.91565657,
"testnet" : false,
"keypoololdest" : 1386385708,
"keypoolsize" : 103,
"paytxfee" : "0.00",
"errors" : ""
}

roozifus

sr. member

Activity: 249

Merit: 250

Quote from: sphere on December 09, 2013, 05:33:03 PM

Quote from: roozifus on December 09, 2013, 05:29:07 PM

Thanks for all the info guys, I've gotten the new client working now and am mining again.

Thanks can i have your IP please

Sure,

110.22.7.0

Looks like blocks are getting confirmed so I guess things are back on track. Cheesy

sphere

full member

Activity: 224

Merit: 100

Quote from: roozifus on December 09, 2013, 05:29:07 PM

Thanks for all the info guys, I've gotten the new client working now and am mining again.

Thanks can i have your IP please

roozifus

sr. member

Activity: 249

Merit: 250

Thanks for all the info guys, I've gotten the new client working now and am mining again.

sphere

full member

Activity: 224

Merit: 100

Quote from: DocNougat on December 09, 2013, 05:17:09 PM

any updated windows-qt?

Unfortunately i am too busy during the weekday to compile the windows qt so you will have you wait until the weekend when I can have go at it. If anyone in the mean time wants to compile feel free to.

DocNougat

newbie

Activity: 50

Merit: 0

any updated windows-qt?

sphere

full member

Activity: 224

Merit: 100

Quote from: Kyune on December 09, 2013, 05:12:28 PM

Quote from: sphere on December 09, 2013, 02:54:30 PM

I think its important that the new clients connect only to the new clients.

Please post your IP on this thread once you have the new client.

In your globe.conf delete all the nodes and use the following command to connect to nodes with the new IP.

connect=XXX.XXX.XXX

Obviously, replace the XXX.XXX.XXX with peoples actual IPs. By using the connect command you will only connect to those specified nodes avoiding the old clients.

The coin has split in two then? I guess this demonstrates how hardforks without enough advance warning before the switchover are a bad idea.

Im not quite sure but i think the new client still confirms the previously mined blocks.

Kyune

sr. member

Activity: 287

Merit: 250

Quote from: sphere on December 09, 2013, 02:54:30 PM

I think its important that the new clients connect only to the new clients.

Please post your IP on this thread once you have the new client.

In your globe.conf delete all the nodes and use the following command to connect to nodes with the new IP.

connect=XXX.XXX.XXX

Obviously, replace the XXX.XXX.XXX with peoples actual IPs. By using the connect command you will only connect to those specified nodes avoiding the old clients.

The coin has split in two then? I guess this demonstrates how hardforks without enough advance warning before the switchover are a bad idea.

sphere

full member

Activity: 224

Merit: 100

Quote from: ampotos on December 09, 2013, 04:08:28 PM

the git is up to date ?

yes

ampotos

newbie

Activity: 15

Merit: 0

the git is up to date ?

sphere

full member

Activity: 224

Merit: 100

I think its important that the new clients connect only to the new clients.

Please post your IP on this thread once you have the new client.

In your globe.conf delete all the nodes and use the following command to connect to nodes with the new IP.

connect=XXX.XXX.XXX

Obviously, replace the XXX.XXX.XXX with peoples actual IPs. By using the connect command you will only connect to those specified nodes avoiding the old clients.

sphere

full member

Activity: 224

Merit: 100

Quote from: tytanick on December 09, 2013, 02:15:28 PM

Quote from: sphere on December 09, 2013, 02:09:02 PM

Ok added leveldb makefile to Github. For some reason windows client was reluctant to sync it.

still gettinf another error :

Code:

 make -f makefile.unix
/bin/sh ../share/genbuild.sh obj/build.h
g++ -c -O2 -pthread -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -D_FILE_OFFSET_BITS=64 -DOPENSSL_NO_SSL2=1 -I/home/GLB/GlobeCrypto/src -I/home/GLB/GlobeCrypto/src/obj -DUSE_UPNP=0 -DUSE_IPV6=1 -I/home/GLB/GlobeCrypto/src/leveldb/include -I/home/GLB/GlobeCrypto/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2  -MMD -MF obj/checkpoints.d -o obj/checkpoints.o checkpoints.cpp
In file included from main.h:8:0,
                 from checkpoints.cpp:10:
bignum.h:14:18: fatal error: mpfr.h: Nie ma takiego pliku ani katalogu
compilation terminated.
make: *** [obj/checkpoints.o] Błąd 1

you need to install mpfr libs

tytanick

legendary

Activity: 2660

Merit: 1096

Simplemining.net Admin

Quote from: sphere on December 09, 2013, 02:09:02 PM

Ok added leveldb makefile to Github. For some reason windows client was reluctant to sync it.

still gettinf another error :

Code:

 make -f makefile.unix
/bin/sh ../share/genbuild.sh obj/build.h
g++ -c -O2 -pthread -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -D_FILE_OFFSET_BITS=64 -DOPENSSL_NO_SSL2=1 -I/home/GLB/GlobeCrypto/src -I/home/GLB/GlobeCrypto/src/obj -DUSE_UPNP=0 -DUSE_IPV6=1 -I/home/GLB/GlobeCrypto/src/leveldb/include -I/home/GLB/GlobeCrypto/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2  -MMD -MF obj/checkpoints.d -o obj/checkpoints.o checkpoints.cpp
In file included from main.h:8:0,
                 from checkpoints.cpp:10:
bignum.h:14:18: fatal error: mpfr.h: Nie ma takiego pliku ani katalogu
compilation terminated.
make: *** [obj/checkpoints.o] Błąd 1

sphere

full member

Activity: 224

Merit: 100

Ok added leveldb makefile to Github. For some reason windows client was reluctant to sync it.

maxpower

sr. member

Activity: 456

Merit: 250

Quote from: roozifus on December 09, 2013, 04:08:24 AM

Hmmm well I'm having a bit of trouble compiling this new source, getting an error:

*** No rule to make target `libleveldb.a'. Stop.

Found some instructions for compiling libleveldb.a but they seem to be for windows and not working for me (I'm on ubuntu).

Anyway I'm off the network now so hopefully the new clients can take hold.

I'll mine some btc for the moment and maybe jump back on globe when I have some time to get the new client working.

I think src/leveldb is missing its Makefile. I copied in the corresponding Makefile from the Freicoin source when I built the Mac client and that worked fine.

sphere

full member

Activity: 224

Merit: 100

Again apologies for the hard fork but better we do now than in a few months when more people making transactions and mining.

roozifus

sr. member

Activity: 249

Merit: 250

Hmmm well I'm having a bit of trouble compiling this new source, getting an error:

*** No rule to make target `libleveldb.a'. Stop.

Found some instructions for compiling libleveldb.a but they seem to be for windows and not working for me (I'm on ubuntu).

Anyway I'm off the network now so hopefully the new clients can take hold.

I'll mine some btc for the moment and maybe jump back on globe when I have some time to get the new client working.

Topic: [ANN] [GLB]Globe – One Currency for One Globe - Polished and Ready for Action - page 52. (Read 113609 times)