[ANN] Ħ [HODL] 5% Interest. No Staking Req. Term Deposits 10%. Solo Mining. - page 58.

ugofoscolo19

newbie

Activity: 49

Merit: 0

found my first block in solo!! With just a I5-4200U dual core!! I am so lucky!! Wink

M1ST3R

member

Activity: 89

Merit: 10

Quote from: xryan on July 16, 2017, 03:23:53 AM

Quote from: ghobson on July 13, 2017, 01:37:31 PM

Quote from: Jayjay04 on July 13, 2017, 08:33:19 AM

Quote from: ghobson on July 12, 2017, 02:31:59 PM

Quote from: Jayjay04 on July 12, 2017, 12:24:29 PM

Can't sync, anyone having the same problem.
Stuck at 278862

make sure to use v3.0.1 , you may need to start with -reindex flag
takes about 45 mins to rebuild the block index ( this does not redownload the blockchain )

you may need to start with -reindex flag, what does that mean ?!?!

You can start a reindex of your local block chain by entering 'hodlcoin-qt.exe -reindex' in a DOS box
Your hodlcoin-qt.exe file can be found under windows in c:\program files\hodlcoin (or the folder where your HodlCoin link points to)

Reindexing worked fine. I ran the solomining with my laptop (67 H/S) and got 3700 Hodl after one day. The last time I mined was a couple of months back and I got mayb 50 Hold/day. Any explanation?

Most likely you're on a wrong chain. Are you using wallet v3.0.1? Check your balance using the block explorer.
Here the link... http://www.fuzzbawls.pw/explore/HOdlcoin/index.php

xryan

newbie

Activity: 35

Merit: 0

Quote from: ghobson on July 13, 2017, 01:37:31 PM

Quote from: Jayjay04 on July 13, 2017, 08:33:19 AM

Quote from: ghobson on July 12, 2017, 02:31:59 PM

Quote from: Jayjay04 on July 12, 2017, 12:24:29 PM

Can't sync, anyone having the same problem.
Stuck at 278862

make sure to use v3.0.1 , you may need to start with -reindex flag
takes about 45 mins to rebuild the block index ( this does not redownload the blockchain )

you may need to start with -reindex flag, what does that mean ?!?!

You can start a reindex of your local block chain by entering 'hodlcoin-qt.exe -reindex' in a DOS box
Your hodlcoin-qt.exe file can be found under windows in c:\program files\hodlcoin (or the folder where your HodlCoin link points to)

Reindexing worked fine. I ran the solomining with my laptop (67 H/S) and got 3700 Hodl after one day. The last time I mined was a couple of months back and I got mayb 50 Hold/day. Any explanation?

wisebc

full member

Activity: 154

Merit: 100

Quote from: Hakko on July 13, 2017, 12:06:04 PM

Question from a HODL-beginner (but meanwhile # 2 on http://hodl.optiminer.pl/)

I am mining on a Windows10 PC in a DOS-Window using the hodlminer-optiminer-fork.zip (http://cryptomining-blog.com/8196-new-faster-hodlminer-and-a-new-mining-pool-for-it-now-available/)
I installed the HOdlcoin Core - Wallet (HOdlcoin Core Version v3.0.1 (64-Bit)).

I mined and transfered 50 this morning. I transfered the "Principal"( Huh

) to my Deposit.

Since then I mined further and now, the mining-stats say:

balance: 58.583
pending balance: 3.041
pending payout: 0.000

In the Wallet-Overview there are those informations:

LEFT SIDE / Balances

Available: 0.00040328 HODL
Pending: 0.00000000 HODL
Immature: 75.49408949 HODL
Total: 75.49449277 HODL
Available: 0.00040328

RIGHT SIDE / Recent transactions

13.07.17 09:21 +49.99998840 HODL (received with my HODLadress ...)
13.07.17 09:21 +0.00040325 (HODL-Adress I dont know)
13.07.17 05:15 +50.00000000 (Mined Confirmed 310 confimations)

BOTTOM / HOdlings (only one row)

Status HOdled
Principal 49.99998840
Accrued Interest 0.00822637
Accrued Value 50.00822637
On Maturation 75.49473154
Term (Days) 365
Deposit Block 0281625
Maturation Block 0486391
Estimated Date 2018/07/13

MY QUESTIONS:
1. The requirement for a payout? I thought: Balance >=50 then payout
2. After a payout I need 21 confirmations before the mined 50 (Blocks/HODLES???) are transfered to my pending balance?
3. After each payout I have to transfer the pending amount to my deposit?

Optiminer's pool pays out using the structure created when everything you mined was automatically hodl'ed for 1 year in your wallet. So, when your balance reaches 50 hodl, you 'get in line' with anyone else who has a balance of 50 or more, and when it is your turn an entire block (50 hodl) is mined to your address, thus paying you 50 hodl. Now, since the last fork, mined coins don't autohodl, so yes, you will have to manually deposit anything that you want to HODL in a term deposit in your wallet.

niksdt101

hero member

Activity: 803

Merit: 501

mining is going on well. we need more momentum to bring hodl up again. so that it reaches last year's value!!!

M1ST3R

member

Activity: 89

Merit: 10

Quote from: THX Jedi on July 15, 2017, 10:07:55 AM

Quote from: M1ST3R on July 15, 2017, 02:11:05 AM

Quote from: THX Jedi on July 15, 2017, 01:28:08 AM

Quote from: M1ST3R on July 14, 2017, 02:04:03 PM

Quote from: THX Jedi on July 14, 2017, 10:35:54 AM

Another newbie question :-

I want to mine on a 2nd PC, can I get it to mine to the same wallet ?

I have tried with the same batch file as PC1 but I seem to get loads of 'Stratum requested work restart' messages

Thanks again

Yes you can mine to the same wallet.
Just add this line (without quotation mark) "miningaddress=walletAddressThatYouWantToMineTo" to your hodlcoin.conf file in your ....AppData\Roaming\HOdlcoin folder.

The wallet should mine to whatever address that you listed.

Thanks for your reply, but....

I don't have a ....AppData\Roaming\HOdlcoin

I have a 'mining' directory from where I run the hodleminer.exe via a simple batch file, and have my wallet installed in a separate directory

I have not tweeked it or optimized it in any way (mainly as I don't know how too), so probably not as efficient as it could be

No problem, just add -miningaddress=walletAddressThatYouWantToMineTo at the end of the hodleminer.exe in the batch file.

e.g. hodleminer.exe -miningaddress=walletAddressThatYouWantToMineTo

Thanks for the info, however, when I add that to my batch file it just crashes, I am sure I am missing something obvious

my batch file is :-

hodlminer.exe -o stratum+tcp://hodl.optiminer.pl:5555 -u -p x -q

Thanks

It should be hodlminer.exe -o stratum+tcp://hodl.optiminer.pl:5555 -u -p x

Also optiminer uses AES and AVX2. Be sure your cpu support them; otherwise, the miner will crash.

THX Jedi

newbie

Activity: 9

Merit: 0

Quote from: M1ST3R on July 15, 2017, 02:11:05 AM

Quote from: THX Jedi on July 15, 2017, 01:28:08 AM

Quote from: M1ST3R on July 14, 2017, 02:04:03 PM

Quote from: THX Jedi on July 14, 2017, 10:35:54 AM

Another newbie question :-

I want to mine on a 2nd PC, can I get it to mine to the same wallet ?

I have tried with the same batch file as PC1 but I seem to get loads of 'Stratum requested work restart' messages

Thanks again

Yes you can mine to the same wallet.
Just add this line (without quotation mark) "miningaddress=walletAddressThatYouWantToMineTo" to your hodlcoin.conf file in your ....AppData\Roaming\HOdlcoin folder.

The wallet should mine to whatever address that you listed.

Thanks for your reply, but....

I don't have a ....AppData\Roaming\HOdlcoin

I have a 'mining' directory from where I run the hodleminer.exe via a simple batch file, and have my wallet installed in a separate directory

I have not tweeked it or optimized it in any way (mainly as I don't know how too), so probably not as efficient as it could be

No problem, just add -miningaddress=walletAddressThatYouWantToMineTo at the end of the hodleminer.exe in the batch file.

e.g. hodleminer.exe -miningaddress=walletAddressThatYouWantToMineTo

Thanks for the info, however, when I add that to my batch file it just crashes, I am sure I am missing something obvious

my batch file is :-

hodlminer.exe -o stratum+tcp://hodl.optiminer.pl:5555 -u -p x -q

Thanks

M1ST3R

member

Activity: 89

Merit: 10

Quote from: THX Jedi on July 15, 2017, 01:28:08 AM

Quote from: M1ST3R on July 14, 2017, 02:04:03 PM

Quote from: THX Jedi on July 14, 2017, 10:35:54 AM

Another newbie question :-

I want to mine on a 2nd PC, can I get it to mine to the same wallet ?

I have tried with the same batch file as PC1 but I seem to get loads of 'Stratum requested work restart' messages

Thanks again

Yes you can mine to the same wallet.
Just add this line (without quotation mark) "miningaddress=walletAddressThatYouWantToMineTo" to your hodlcoin.conf file in your ....AppData\Roaming\HOdlcoin folder.

The wallet should mine to whatever address that you listed.

Thanks for your reply, but....

I don't have a ....AppData\Roaming\HOdlcoin

I have a 'mining' directory from where I run the hodleminer.exe via a simple batch file, and have my wallet installed in a separate directory

I have not tweeked it or optimized it in any way (mainly as I don't know how too), so probably not as efficient as it could be

No problem, just add -miningaddress=walletAddressThatYouWantToMineTo at the end of the hodleminer.exe in the batch file.

e.g. hodleminer.exe -miningaddress=walletAddressThatYouWantToMineTo

THX Jedi

newbie

Activity: 9

Merit: 0

Quote from: M1ST3R on July 14, 2017, 02:04:03 PM

Quote from: THX Jedi on July 14, 2017, 10:35:54 AM

Another newbie question :-

I want to mine on a 2nd PC, can I get it to mine to the same wallet ?

I have tried with the same batch file as PC1 but I seem to get loads of 'Stratum requested work restart' messages

Thanks again

Yes you can mine to the same wallet.
Just add this line (without quotation mark) "miningaddress=walletAddressThatYouWantToMineTo" to your hodlcoin.conf file in your ....AppData\Roaming\HOdlcoin folder.

The wallet should mine to whatever address that you listed.

Thanks for your reply, but....

I don't have a ....AppData\Roaming\HOdlcoin

I have a 'mining' directory from where I run the hodleminer.exe via a simple batch file, and have my wallet installed in a separate directory

I have not tweeked it or optimized it in any way (mainly as I don't know how too), so probably not as efficient as it could be

M1ST3R

member

Activity: 89

Merit: 10

Quote from: THX Jedi on July 14, 2017, 10:35:54 AM

Another newbie question :-

I want to mine on a 2nd PC, can I get it to mine to the same wallet ?

I have tried with the same batch file as PC1 but I seem to get loads of 'Stratum requested work restart' messages

Thanks again

Yes you can mine to the same wallet.
Just add this line (without quotation mark) "miningaddress=walletAddressThatYouWantToMineTo" to your hodlcoin.conf file in your ....AppData\Roaming\HOdlcoin folder.

The wallet should mine to whatever address that you listed.

THX Jedi

newbie

Activity: 9

Merit: 0

Another newbie question :-

I want to mine on a 2nd PC, can I get it to mine to the same wallet ?

I have tried with the same batch file as PC1 but I seem to get loads of 'Stratum requested work restart' messages

Thanks again

FreeTrade

legendary

Activity: 1470

Merit: 1030

Quote from: ram86 on July 13, 2017, 08:36:01 AM

I was thinking if it's possible for the wallet to autohodl funds received because during holidays I won't be able to access computer for maybe some days or maybe weeks, who knows

Good suggestion! Added as a feature request -

https://github.com/HOdlcoin/HOdlcoin/issues/99

ghobson

full member

Activity: 250

Merit: 100

Crypto Developer

Quote from: THX Jedi on July 14, 2017, 12:53:24 AM

Quote from: ghobson on July 08, 2017, 02:55:53 PM

Quote from: THX Jedi on July 08, 2017, 06:17:10 AM

Hi,

Can anyone help, I have u[graded to v3 but my blockchain is not updating, it says I am connected to the network.

but I get the following errors in the log :-

2017-07-08 11:07:57 ERROR: AcceptBlockHeader: block is marked invalid
2017-07-08 11:07:57 ERROR: invalid header received
2017-07-08 11:07:57 ProcessMessages(headers, 178003 bytes) FAILED peer=14

Thanks

hi , welcome to Hodlcoin.
I hope you mean v3.0.1 , it can sometimes help to start the wallet with some known peer node ip addresses who are on v3.0.1 , you can find the list here , http://www.fuzzbawls.pw/explore/HOdlcoin/network.php
push the nodes button next to 3.0.1 and add some of those to your hodlcoin.conf file which is in same dir as your wallet.dat file. Then start your wallet again.

I thanks, I actually needed to start a reindex of my local blockchain, but all up and running now, thanks

Glad you found the solution, and happy Hodling.

THX Jedi

newbie

Activity: 9

Merit: 0

Quote from: ghobson on July 08, 2017, 02:55:53 PM

Quote from: THX Jedi on July 08, 2017, 06:17:10 AM

Hi,

Can anyone help, I have u[graded to v3 but my blockchain is not updating, it says I am connected to the network.

but I get the following errors in the log :-

2017-07-08 11:07:57 ERROR: AcceptBlockHeader: block is marked invalid
2017-07-08 11:07:57 ERROR: invalid header received
2017-07-08 11:07:57 ProcessMessages(headers, 178003 bytes) FAILED peer=14

Thanks

hi , welcome to Hodlcoin.
I hope you mean v3.0.1 , it can sometimes help to start the wallet with some known peer node ip addresses who are on v3.0.1 , you can find the list here , http://www.fuzzbawls.pw/explore/HOdlcoin/network.php
push the nodes button next to 3.0.1 and add some of those to your hodlcoin.conf file which is in same dir as your wallet.dat file. Then start your wallet again.

I thanks, I actually needed to start a reindex of my local blockchain, but all up and running now, thanks

optiminer

full member

Activity: 187

Merit: 100

Quote from: wisebc on July 12, 2017, 02:34:30 PM

Quote from: ghobson on July 12, 2017, 10:00:27 AM

Quote from: spmjnkbx on July 12, 2017, 08:24:49 AM

Quote from: ram86 on July 12, 2017, 02:20:35 AM

suprnova pool, optiminer isn't compatible, just checked

I thought suprnova hodl pool was dead

Last we heard from optiminer he said he had shutdown the pool. ( i think it was around the time someone had try'd something with negative timestamps, which is the primary reason we had to create the 3.0.1 wallet ).

Officially we don't really promote pool's, the ANN front page says clearly,
"Mining direct from the wallet is very efficient and is the recommended way of supporting the network."

Having said that there are hodl pools out there...

Optiminer's pool is alive and well as far as I can tell. I'm still getting blocks from it.

hodl.optiminer.pl has been running smoothly for the last weeks, yes. And suprnova hodl pool was restarted when the requirement to hodl mined coins for a year was removed.

ghobson

full member

Activity: 250

Merit: 100

Crypto Developer

Quote from: Jayjay04 on July 13, 2017, 08:33:19 AM

Quote from: ghobson on July 12, 2017, 02:31:59 PM

Quote from: Jayjay04 on July 12, 2017, 12:24:29 PM

Can't sync, anyone having the same problem.
Stuck at 278862

make sure to use v3.0.1 , you may need to start with -reindex flag
takes about 45 mins to rebuild the block index ( this does not redownload the blockchain )

you may need to start with -reindex flag, what does that mean ?!?!

You can start a reindex of your local block chain by entering 'hodlcoin-qt.exe -reindex' in a DOS box
Your hodlcoin-qt.exe file can be found under windows in c:\program files\hodlcoin (or the folder where your HodlCoin link points to)

ghobson

full member

Activity: 250

Merit: 100

Crypto Developer

Quote from: kaltun on July 13, 2017, 12:17:29 PM

Quote from: Jabba on July 13, 2017, 08:37:13 AM

I quote myself from some posts before:

If you discover a difference you can start a reindex of your local block chain by entering 'hodlcoin-qt.exe -reindex' in a DOS box

Your hodlcoin-qt.exe file can be found under windows in c:\program files\hodlcoin (or the folder where your HodlCoin link points to)

Good Luck!

Dear Jabba,

you saved my coins, after downloading the new wallet it didnt solve my problem , till i saw your ( second) reply about reindex, i did what you wrote and after resync i saw my coins back at my wallet ...

thx again for your help...

glad its resolved kaltun

kaltun

hero member

Activity: 1540

Merit: 502

Quote from: Jabba on July 13, 2017, 08:37:13 AM

I quote myself from some posts before:

If you discover a difference you can start a reindex of your local block chain by entering 'hodlcoin-qt.exe -reindex' in a DOS box

Your hodlcoin-qt.exe file can be found under windows in c:\program files\hodlcoin (or the folder where your HodlCoin link points to)

Good Luck!

Dear Jabba,

you saved my coins, after downloading the new wallet it didnt solve my problem , till i saw your ( second) reply about reindex, i did what you wrote and after resync i saw my coins back at my wallet ...

thx again for your help...

Hakko

newbie

Activity: 2

Merit: 0

Question from a HODL-beginner (but meanwhile # 2 on http://hodl.optiminer.pl/)

I am mining on a Windows10 PC in a DOS-Window using the hodlminer-optiminer-fork.zip (http://cryptomining-blog.com/8196-new-faster-hodlminer-and-a-new-mining-pool-for-it-now-available/)
I installed the HOdlcoin Core - Wallet (HOdlcoin Core Version v3.0.1 (64-Bit)).

I mined and transfered 50 this morning. I transfered the "Principal"( Huh

) to my Deposit.

Since then I mined further and now, the mining-stats say:

balance: 58.583
pending balance: 3.041
pending payout: 0.000

In the Wallet-Overview there are those informations:

LEFT SIDE / Balances

Available: 0.00040328 HODL
Pending: 0.00000000 HODL
Immature: 75.49408949 HODL
Total: 75.49449277 HODL
Available: 0.00040328

RIGHT SIDE / Recent transactions

13.07.17 09:21 +49.99998840 HODL (received with my HODLadress ...)
13.07.17 09:21 +0.00040325 (HODL-Adress I dont know)
13.07.17 05:15 +50.00000000 (Mined Confirmed 310 confimations)

BOTTOM / HOdlings (only one row)

Status HOdled
Principal 49.99998840
Accrued Interest 0.00822637
Accrued Value 50.00822637
On Maturation 75.49473154
Term (Days) 365
Deposit Block 0281625
Maturation Block 0486391
Estimated Date 2018/07/13

MY QUESTIONS:
1. The requirement for a payout? I thought: Balance >=50 then payout
2. After a payout I need 21 confirmations before the mined 50 (Blocks/HODLES???) are transfered to my pending balance?
3. After each payout I have to transfer the pending amount to my deposit?

Jabba

member

Activity: 109

Merit: 11

YES!!!!!! Always backup your wallet.dat - otherwise your coins get lost.

Topic: [ANN] Ħ [HODL] 5% Interest. No Staking Req. Term Deposits 10%. Solo Mining. - page 58. (Read 472979 times)