[ANN] lolMiner-mnx, Mining MinexCoin(MNX) New version: v0.4 (July 22) - page 24.

elektrofusion7

newbie

Activity: 12

Merit: 0

Quote from: 4ward on March 12, 2018, 01:39:19 PM

rx480 with mining bios on Windows 10 w/ last drivers
2g - 10 kh/s
auto - 11.1 kh/s
high - 11.3 kh/s

no memory issues with driver preventing memory usage or anything
running with:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ps.
previous version with workbatch 12 was showing 10.2 kh/s

pps. i have an issue with miner hangs when you scroll the text output in the window

same here. Output is paused and can`t continue(tried some commands but nothing happened)(only if use vertical scroll bar this happens)
0.3 much better hashrate(7400 to 9300 Wow) THANKS!!!! Cheesy

ALFA-Dnepr

newbie

Activity: 15

Merit: 0

1060 3G increased from 9800-9900 to 10,300-10,400 sol / s
and increased energy consumption by 5%

ALFA-Dnepr

newbie

Activity: 15

Merit: 0

You need to increase the value of the virtual memory file. The total memory capacity of all video cards plus the amount of RAM memory

ol92

sr. member

Activity: 445

Merit: 255

Quote from: Lolliedieb on March 12, 2018, 09:58:08 AM

Hi folks,

well it took some time for me, but finally it is there: lolMiner-mnx 0.3 Cheesy

And its the first month birthday of the miner as well - time to party Grin

...

Note that the performance of AMD cards may be limited in Windows, see the commends to –set-work-batch below.

--set-work-batch
There are now three special values 2G, AUTO and HIGH. When the work batch is set to 2G the miner is allowed to use 2 gigabytes of graphic memory at most. At level AUTO it will use at most 60% of the graphic cards memory and at level HIGH 90%. Note that AUTO and HIGH operate on per-GPU level, so mixing graphic cards with different memory sizes is no problem.

For Windows and AMD graphic cards there currently is a problem with lolMiner-mnx and the driver preventing that the miner works with more then 2 gigabytes of memory. Therefore the default for the Windows version is 2G, while the default for the Linux version is AUTO. This causes lolMiner-mnx 0.3 to be slightly faster on Linux compared to Windows when using AMD graphic cards.

With blockchain driver on vega, there are no problem with higher work batch. I found that 11 is a good choice for rx vega on win 10 with this driver.

ol92

sr. member

Activity: 445

Merit: 255

titan xp with lolminer 0.3: 30S/s!!! Speed depends on strong overclock to memory (+800).

RX vega with blockchain driver : 19500 S/s with gpu@1408 and mem@1100, work batch 11

Congrat for the new miner performance!!!

4ward

member

Activity: 473

Merit: 18

rx480 with mining bios on Windows 10 w/ last drivers
2g - 10 kh/s
auto - 11.1 kh/s
high - 11.3 kh/s

no memory issues with driver preventing memory usage or anything
running with:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ps.
previous version with workbatch 12 was showing 10.2 kh/s

pps. i have an issue with miner hangs when you scroll the text output in the window

skyluis2000

newbie

Activity: 2

Merit: 0

ninjam

newbie

Activity: 84

Merit: 0

Tested this new version and although speeds reported in the miner are higher than for previous version (for nvidia rig), after about 4h speeds reported on the pool side are even less than previous version. For previous version avg results on the pool side (http://eu2.minexpool.nl) were reported correctly, maybe even few % more than in the miner, but for this 0.3 version it is around 20% less than what is reported in the miner. I'm talking about average results.

Lolliedieb

member

Activity: 433

Merit: 48

Quote from: beta1234 on March 12, 2018, 12:46:19 PM

Same old Problem Sad

And i see no hashboost to 22,5kSol for 1080Ti, everything is pretty same like the Minerversions before
1080Ti, 1070, 1060 =-> 48K/Sol/s max

Very strange... could only be that your driver really stops the OpenCL execution, because Kernel and host side are now dead lock free - so even when code does not finish properly it should schedule new Work for the GPU. Just ordeted own hardware to do tests at home by the way.

As it appears we have first known problem with low end cards (gtx 750, gt 1030, gtx 1050...) for these chips the new algo seems in fact slower. I think I will do a switch to turn off code changes for this cards.

As said about the 0 sols: no idea why this happens. Anyone else?

beta1234

newbie

Activity: 9

Merit: 0

http://imgs.to/v/?frR6QGyUTg#frR6QGyUTg

Same old Problem Sad

And i see no hashboost to 22,5kSol for 1080Ti, everything is pretty same like the Minerversions before
1080Ti, 1070, 1060 =-> 48K/Sol/s max

mk111

jr. member

Activity: 230

Merit: 1

V0.3

Win 10.
4 x RX 580 4GB
--set-work-batch AUTO

Each card does between 7000 and 9000 sol/s but the lolminer .exe uses 6GB memory out of the 8GB system memory.

mk111

jr. member

Activity: 230

Merit: 1

V0.3

Been running for 30 mins.

2x 1070 on Win10
--set-work-batch HIGH

Average speed (60s): 17088.5 sol/s | 14157.2 sol/s Total: 31245.6 sol/s

Total jumps between 29000 and 34000 sol/s

valesthorm

newbie

Activity: 4

Merit: 0

Quote from: Mogul59 on March 12, 2018, 11:33:26 AM

Quote from: valesthorm on March 12, 2018, 11:21:24 AM

i have 3 1070 gtx and they working at 15400-15700 sol/s,and no oc,but power limit set over 100%.
What you doing ,for give more sol/s?(more 15000)

this is very much. what settings do you use to start the program?

lolMiner-mnx.exe --device 0,1,2,3,4 --server mnx.suprnova.cc --port 7076 --user x --pass x
pause

Kompik

sr. member

Activity: 463

Merit: 250

I dont want any reward, please keep it, you deserve it because of your development

Mogul59

member

Activity: 201

Merit: 11

Quote from: valesthorm on March 12, 2018, 11:21:24 AM

i have 3 1070 gtx and they working at 15400-15700 sol/s,and no oc,but power limit set over 100%.
What you doing ,for give more sol/s?(more 15000)

this is very much. what settings do you use to start the program?

WinstonBlue

member

Activity: 101

Merit: 10

Quote from: Mogul59 on March 12, 2018, 11:05:55 AM

unfortunately the main problem remains:

can I start the miner incorrectly? please tell me the correct startup file. I have a 1070 and Win7

Code:

timeout 10
lolMiner-mnx.exe --server mnx.suprnova.cc --port 7076 --user *** --pass *** --device 0,1,2,3
pause

The same problem here. Windows 7, 5 card rig.

WinstonBlue

member

Activity: 101

Merit: 10

A faster miner thats for sure, but still unstable. On multi rig machines after a few minites the miner app crashes (no driver, the miner!) and a stratum problem with suprnova.cc ( connection lost, server not reachable)

Optiminer connects flawlessly.

valesthorm

newbie

Activity: 4

Merit: 0

i have 3 1070 gtx and they working at 15400-15700 sol/s,and no oc,but power limit set over 100%.
What you doing ,for give more sol/s?(more 15000)

Mogul59

member

Activity: 201

Merit: 11

unfortunately the main problem remains:

can I start the miner incorrectly? please tell me the correct startup file. I have a 1070 and Win7

Code:

timeout 10
lolMiner-mnx.exe --server mnx.suprnova.cc --port 7076 --user *** --pass *** --device 0,1,2,3
pause

ninjam

newbie

Activity: 84

Merit: 0

@Lolliedieb
Tested on vega 56 under Windows 10, using all 3 parameters: 2G, AUTO and HIGH and results are not significantly higher.
Also there is still that huge ram usage spike at the beginning (around 14GB).
Anyway, thanks for adding additional functionality.

Topic: [ANN] lolMiner-mnx, Mining MinexCoin(MNX) New version: v0.4 (July 22) - page 24. (Read 30772 times)