I have made simple payment module for OsCommerce to accept Lyrabar as payment. Opencart module is also coming. Please pm me if somebody needs those!
Topic: [ANN] Lyrabar - A rare bar with Lyra2REv2 algorithm, 0.9.1 is out! [CPU/GPU PoW] - page 8. (Read 67654 times)
November 13, 2015, 04:55:37 PM
Yeah Coinmarketcap would be nice step..
I have made simple payment module for OsCommerce to accept Lyrabar as payment. Opencart module is also coming. Please pm me if somebody needs those!
I have made simple payment module for OsCommerce to accept Lyrabar as payment. Opencart module is also coming. Please pm me if somebody needs those!
November 13, 2015, 04:34:20 PM
Is the explorer 4 days behind?
Seems it's a bit behind, though, I'm still going to put a official explorer soon in couple of weeks.
You can use our basic explorer for the time being:
http://www.zpool.ca/explorer?id=865
Cheers
Thanks guys! Maybe coinmarketcap will add LYB, I don't know what else they need.
November 13, 2015, 04:30:55 PM
Is the explorer 4 days behind?
Seems it's a bit behind, though, I'm still going to put a official explorer soon in couple of weeks.
You can use our basic explorer for the time being:
http://www.zpool.ca/explorer?id=865
Cheers
November 13, 2015, 02:29:57 PM
Is the explorer 4 days behind?
Seems it's a bit behind, though, I'm still going to put a official explorer soon in couple of weeks.
November 13, 2015, 02:17:59 PM
Is the explorer 4 days behind?
November 12, 2015, 12:29:52 AM
anyone have some fresh nodes? Am only getting 1...
addnode=95.215.46.87:4046
addnode=85.25.200.125:4046
addnode=64.57.133.225:4046
addnode=107.170.167.218:4046
addnode=104.238.135.136:4046
addnode=104.131.89.9:4046
Thanks!
November 11, 2015, 11:38:49 PM
anyone have some fresh nodes? Am only getting 1...
addnode=95.215.46.87:4046
addnode=85.25.200.125:4046
addnode=64.57.133.225:4046
addnode=107.170.167.218:4046
addnode=104.238.135.136:4046
addnode=104.131.89.9:4046
November 11, 2015, 06:29:03 PM
anyone have some fresh nodes? Am only getting 1...
November 07, 2015, 04:53:16 PM
This information for ccminer users, found out that ccminer supports parameters like this
--no-gbt disable getblocktemplate support (height check in solo)
--no-longpoll disable X-Long-Polling support
--no-stratum disable X-Stratum support
With ccminer used for solomining, this --no-gbt might be required, I currently don't have hardware like that, can't confirm does it work.
--no-gbt disable getblocktemplate support (height check in solo)
--no-longpoll disable X-Long-Polling support
--no-stratum disable X-Stratum support
With ccminer used for solomining, this --no-gbt might be required, I currently don't have hardware like that, can't confirm does it work.
I've tried using --no-gbt but it doesn't make a difference. I will ask in the ccminer thread.
If you get a working solution, please share it here so others with identical issue might have an answer
November 07, 2015, 04:37:12 PM
This information for ccminer users, found out that ccminer supports parameters like this
--no-gbt disable getblocktemplate support (height check in solo)
--no-longpoll disable X-Long-Polling support
--no-stratum disable X-Stratum support
With ccminer used for solomining, this --no-gbt might be required, I currently don't have hardware like that, can't confirm does it work.
--no-gbt disable getblocktemplate support (height check in solo)
--no-longpoll disable X-Long-Polling support
--no-stratum disable X-Stratum support
With ccminer used for solomining, this --no-gbt might be required, I currently don't have hardware like that, can't confirm does it work.
I've tried using --no-gbt but it doesn't make a difference. I will ask in the ccminer thread.
November 07, 2015, 04:04:02 PM
This information for ccminer users, found out that ccminer supports parameters like this
--no-gbt disable getblocktemplate support (height check in solo)
--no-longpoll disable X-Long-Polling support
--no-stratum disable X-Stratum support
With ccminer used for solomining, this --no-gbt might be required, I currently don't have hardware like that, can't confirm does it work.
--no-gbt disable getblocktemplate support (height check in solo)
--no-longpoll disable X-Long-Polling support
--no-stratum disable X-Stratum support
With ccminer used for solomining, this --no-gbt might be required, I currently don't have hardware like that, can't confirm does it work.
November 06, 2015, 05:30:55 PM
I'm using:
ccminer -a lyra2v2 -o http://192.168.1.2:4047 -u rpcuser -p whatever
and it doesn't work.
tried sp and tprovut versions, both same error.
let me add that I've been solomining for many months on other coins and never encountered that same error.
I also forgot to mention, please also try solo mining of Vertcoin, then I'll know is there problem with the source code.
November 06, 2015, 05:26:33 PM
Is solomine still broken? I can't make it work... "Empty data received in json_rpc_call"
Lyrabar uses Getwork for mining in the wallet, not Getblocktemplate (GBT) like in some newer coins. Pointing miners with stratum+tcp:// does not work, http:// must be used instead.
I'm using:
ccminer -a lyra2v2 -o http://192.168.1.2:4047 -u rpcuser -p whatever
and it doesn't work.
tried sp and tprovut versions, both same error.
let me add that I've been solomining for many months on other coins and never encountered that same error.
Hi,
I bet there is no Getwork support on later ccminer for NVIDIA, just the GBT. sgminer from djm's repo is working great with Getwork, also it's working best solo mining on AMD cards. This might be the reason, ccminer might try to hash GBT blocks while the work is available just in Getwork form. Try using slush's stratum proxy with getwork enabled and stratum disabled, try does it make any change. You can connect stratum miners on the proxy, and proxy itself with getwork to the wallet. Also have asearch for ccminer with Lyra2REv2 and getwork support. I'll look what I can do with the protocol, if GBT change is possible.
So everyone, stick with Getwork protocol with solo mining ATM. I confirm it works, 18 blocks found as solo this far after algorithm change. I get my NVIDIA miner work, I'll try does it work, SM2.0-3.5 version of ccminer Lyra2REv2 is almost out and can be compiled from sources atm.
November 06, 2015, 11:37:06 AM
Is solomine still broken? I can't make it work... "Empty data received in json_rpc_call"
Lyrabar uses Getwork for mining in the wallet, not Getblocktemplate (GBT) like in some newer coins. Pointing miners with stratum+tcp:// does not work, http:// must be used instead.
I'm using:
ccminer -a lyra2v2 -o http://192.168.1.2:4047 -u rpcuser -p whatever
and it doesn't work.
tried sp and tprovut versions, both same error.
let me add that I've been solomining for many months on other coins and never encountered that same error.
November 06, 2015, 11:26:05 AM
I confirm that solo mining with external miner connected to the wallet works great now, generated coins shows instantly up to balance to wait maturing. Some of the community users reported broken solomining in the first release. This does not apply to the in-wallet cpuminer which have been worked flawlessly since start and after algorithm change (tested this to make sure).
My Dual HD6870 GPU mining rig:
To solo mine through the daemon or graphical client, use following kind of parameters in the configuration file (lyrabar.conf, stored at Users/Username/Appdata/Roaming/Lyrabar/)
1 = Feature enabled, 0 = Feature disabled, Asterisk mark * is used as a wildcard to allow whole range on IP address configuration. If mining at same computer the wallet is, use localhost or 127.0.0.1. For example, in this configuration I'm using 192.168.*.* in both cases to allow all connections from my local network to solo mine from any mining capable computer without knowing it's local IP address. Never use your IP address visible to internet in this. Remove comments " // Comment" I'm using in here to clarify things. Name of the configuration file is unique for every coin, use lyrabar.conf if solomining Lyrabar.
Be sharp when making own versions of the configuration files, if facing a connection issue with the miner, triple check RPC and P2P ports and the username and password in both configurations.
coin.conf
In here is a simple sgminer configuration for solomining, other way is to create a Windows batch file (or a shell script on Linux). This configuration is for sgminer using Lyra2REv2 as mining algorithm.
Please use http:// to enable getwork mining, Lyrabar does not support Getblocktemplate (GBT), so stratum+tcp:// can't be used in here. Again, remove all " // Comments" I've wrote to explain things in the configuration file, to make the configuration work.
solomine.conf
For a Windows batch file creation, create a text file in miner's directory where earlier made sgminer configuration is located and add next into it:
Save the file as .bat (or rename to .bat, if you have file extensions shown)
If you don't want to use configuration above and feel configuration files for sgminer are too complicated, you can use just parameters without a config file. In that case create this file into sgminer directory.
Save the file as .bat (or rename to .bat, if you have file extensions shown)
After everythings ready, start the wallet, wait it to synchronize with the blockchain fully before starting the miner itself. Triple check everything related to IP addresses, ports and login credentials.
My Dual HD6870 GPU mining rig:
Code:
sgminer 5.0.1-43-g889a5-dirty - Started: [2015-11-06 02:32:49] - [0 days 02:23:3
--------------------------------------------------------------------------------
(0s):21.10M (avg):3.934Mh/s | A:2697 R:0 HW:0 WU:14.336/m
ST: 5 SS: 0 NB: 60 LW: 9022 GF: 4 RF: 0
Connected to Lyrabar Solo (longpoll) diff 488 as user
Block: 719e6c2f... Diff:1 Started: [04:56:22] Best share: 2.48K
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 71.0C 1759RPM | 1.963M/1.960Mh/s | R: 0.0% HW:0 WU:7.147/m xI: 32
GPU 1: 74.0C 4262RPM | 1.960M/1.973Mh/s | R: 0.0% HW:0 WU:7.189/m xI: 32
--------------------------------------------------------------------------------
[04:52:57] Accepted 5f904b98 Diff 685/492 GPU 0 at Lyrabar Solo
[04:54:38] Accepted 25bcc66f Diff 1.74K/484 GPU 0 at Lyrabar Solo
To solo mine through the daemon or graphical client, use following kind of parameters in the configuration file (lyrabar.conf, stored at Users/Username/Appdata/Roaming/Lyrabar/)
1 = Feature enabled, 0 = Feature disabled, Asterisk mark * is used as a wildcard to allow whole range on IP address configuration. If mining at same computer the wallet is, use localhost or 127.0.0.1. For example, in this configuration I'm using 192.168.*.* in both cases to allow all connections from my local network to solo mine from any mining capable computer without knowing it's local IP address. Never use your IP address visible to internet in this. Remove comments " // Comment" I'm using in here to clarify things. Name of the configuration file is unique for every coin, use lyrabar.conf if solomining Lyrabar.
Be sharp when making own versions of the configuration files, if facing a connection issue with the miner, triple check RPC and P2P ports and the username and password in both configurations.
coin.conf
Code:
rpcuser=rpcusername // Generate own username, use this in the miner configuration
rpcpassword=rpcpassword // Generate own password, use this in the miner configuration
rpcallowip=192.168.*.* // Allows external miner(s) connection to wallet from a IP address defined (You can connect many miners by using asterisk)
rpcconnect=192.168.*.* // Connects to miner(s) used for solomining from other computer than where wallet is running. (You can connect many miners by using asterisk)
rpcport=4047 // Unique for every coin, RPC port for Lyrabar
port=4046 // Unique for every coin, P2P port for Lyrabar
listen=1 // wallet/client listens to connections from other clients
server=1 // daemon accepts commands
daemon=1 // enables daemon on background while running graphical wallet
gen=0 // same as "setgenerate false", means disabling wallet's built-in cpuminer
In here is a simple sgminer configuration for solomining, other way is to create a Windows batch file (or a shell script on Linux). This configuration is for sgminer using Lyra2REv2 as mining algorithm.
Please use http:// to enable getwork mining, Lyrabar does not support Getblocktemplate (GBT), so stratum+tcp:// can't be used in here. Again, remove all " // Comments" I've wrote to explain things in the configuration file, to make the configuration work.
solomine.conf
Code:
{
"pools": [
{
"name": "Lyrabar solomining", // Define a name for your pool (not mandatory)
"url": "http://192.168.1.10:4047", // Define the IP address of the machine running the wallet, if wallet is at same computer, use [i]127.0.0.1[/i] or [i]localhost[/i].
"user": "rpcusername", // Use the RPC username you defined in coin's configuration file earlier.
"pass": "rpcpassword" // Use the RPC password you defined in coin's configuration file earlier.
}
],
"profiles": [],
"algorithm" : "Lyra2REv2", // Using uppercase letters with Lyra2REv2 algorithm name on sgminer is mandatory
"worksize" : "64",
"gpu-threads" : "1",
"device": "all",
"xintensity" : "16", // Experimental GPU intensity can be set to 2, 4, 8, 16, 32, 64, 128, 256, 512, etc...
"temp-cutoff": "95",
"temp-overheat": "85",
"temp-target": "71",
"auto-fan" : true, // Auto-adjust fan speed, tries to keep temperature at value defined in "temp-target"
"shares": "0",
"expiry": "0", // Recommended to set the value to 0 when solomining
"gpu-dyninterval": "7",
"hamsi-expand-big": "4",
"keccak-unroll": "0",
"log": "0",
"no-pool-disable": true,
"no-client-reconnect": true,
"queue": "0",
"scan-time": "0", // Recommended to set the value to 0 when solomining
"kernel-path": "/usr/local/bin"
}
For a Windows batch file creation, create a text file in miner's directory where earlier made sgminer configuration is located and add next into it:
Code:
sgminer.exe -c solomine.conf
pause
If you don't want to use configuration above and feel configuration files for sgminer are too complicated, you can use just parameters without a config file. In that case create this file into sgminer directory.
Code:
sgminer.exe --algorithm Lyra2REv2 --xintensity 16 --worksize 64 --expiry 0 --scan-time 0 -o http://walletip:rpcport -u rpcusername -p rpcpassword
pause
After everythings ready, start the wallet, wait it to synchronize with the blockchain fully before starting the miner itself. Triple check everything related to IP addresses, ports and login credentials.
November 06, 2015, 10:32:48 AM
Is solomine still broken? I can't make it work... "Empty data received in json_rpc_call"
Lyrabar uses Getwork for mining in the wallet, not Getblocktemplate (GBT) like in some newer coins. Pointing miners with stratum+tcp:// does not work, http:// must be used instead.
November 06, 2015, 05:28:24 AM
Is solomine still broken? I can't make it work... "Empty data received in json_rpc_call"
CPU solo mining also?
November 06, 2015, 05:00:01 AM
Is solomine still broken? I can't make it work... "Empty data received in json_rpc_call"
I have the same problem.
November 06, 2015, 03:54:00 AM
Is solomine still broken? I can't make it work... "Empty data received in json_rpc_call"
November 05, 2015, 11:23:03 PM
Hi everyone,
Hashing algorithm changed successfully, the official Lyrabar pool found the block 160000, and all latter blocks running fine.
I confirm that mining also works on YiiMP Lyra2REv2 port flawlessly, and C-CEX updated also their wallet in advance.
Sad news there is still people mining with old algorithm on the official pool, those miners are not getting paid at all because everyone using a old algo miner gets all their shares submitted as "Low difficulty shares" and all that kind of shares are rejected on the poolside.
I thought almost three weeks is enough time to notify about algorithm update, still some people mining with the old algorithm and there is still users with non-working old wallet.
Found one quite new Windows version of the Lyra2REv2 cpuminer, this download link is from a post on the official cpuminer-multi Bitcointalk thread.
https://www.dropbox.com/s/62vjcieameo0ci7/cpuminer-gw64-lyra2rev2.exe
Linux users gets the latest version from cpuminer-multi's github page:
https://github.com/tpruvot/cpuminer-multi
If already have cloned from git and built the miner successfully, you can "git pull" the latest updates in the miner's directory and recompile by "./build.sh" command
Hashing algorithm changed successfully, the official Lyrabar pool found the block 160000, and all latter blocks running fine.
I confirm that mining also works on YiiMP Lyra2REv2 port flawlessly, and C-CEX updated also their wallet in advance.
Sad news there is still people mining with old algorithm on the official pool, those miners are not getting paid at all because everyone using a old algo miner gets all their shares submitted as "Low difficulty shares" and all that kind of shares are rejected on the poolside.
I thought almost three weeks is enough time to notify about algorithm update, still some people mining with the old algorithm and there is still users with non-working old wallet.
Found one quite new Windows version of the Lyra2REv2 cpuminer, this download link is from a post on the official cpuminer-multi Bitcointalk thread.
https://www.dropbox.com/s/62vjcieameo0ci7/cpuminer-gw64-lyra2rev2.exe
Linux users gets the latest version from cpuminer-multi's github page:
https://github.com/tpruvot/cpuminer-multi
If already have cloned from git and built the miner successfully, you can "git pull" the latest updates in the miner's directory and recompile by "./build.sh" command
Jump to: