[ANN] [MINT] Mintcoin (POS / 5%) [NO ICO] [Fair distro, community maintained] - page 995.

bizzargin

sr. member

Activity: 424

Merit: 250

Quote from: CHMinePeeR on February 08, 2014, 12:08:30 PM

Shit guys, stop with that wallet issue shit.......

THE NETWORK IS WORKING VERY WELL, so if you cant sync its your problem!!!!!
i'm mining and use the wallet from 20 min after launch and had any problem!!!

People should use the search engine on HOW TO SETUP WALLET.... you guys blame this tread of a wunderful coin that is working perfectly!!!!!!

i repeat, i just followed the first posts instruction to setup my wallet...I just created the conf file and relaunch my wallet, if you are not able to do this, please quit cryptos!!!!
and i repeat i'm a noob, i joined mining in december.... damn all this basic things are not so complicate to post pages over pages only with your stupid wallet question.

There are miners of 50+MHs and you think really that they would mine a coin if the wallet was not working? Huh

MINT network is working PERFECTLY!

Stop with your crap posting about the wallet and post some productive post for MINT Future!!

THANK YOU. Couldn't have said it better myself.

wing_hk

full member

Activity: 182

Merit: 100

Quote from: dreamlucky on February 08, 2014, 01:38:16 PM

http://alt-exchange.biz/

I've never used this but they have MINT coin listed.

openex.pw and "freshmarket" both use openex framework have been hacked before

use this exchange built with same source with caution

withdraw balance after trading. This is my advice

mkonecny

newbie

Activity: 14

Merit: 0

Quote from: Carlitos714 on February 08, 2014, 01:42:14 PM

Quote from: valley365 on February 08, 2014, 01:01:35 PM

Not sure why some people can't connect, I have 75 connections, and here are some of my peers I just get:

addnode=113.135.133.39
addnode=115.28.140.128
addnode=62.233.34.246
addnode=162.243.35.172
addnode=88.164.227.110
addnode=176.14.145.130
addnode=125.39.130.15
addnode=123.53.221.104
addnode=198.144.159.39
addnode=184.75.214.42
addnode=113.69.22.36
addnode=86.26.190.235
addnode=153.19.215.115
addnode=115.28.134.205
addnode=223.152.73.253
addnode=122.178.204.154
addnode=115.28.162.160
addnode=81.108.157.78
addnode=180.112.221.68
addnode=120.144.87.195
addnode=31.53.158.152
addnode=50.102.222.206
addnode=60.182.177.105
addnode=217.118.83.145
addnode=119.119.151.106
addnode=218.77.97.176
addnode=182.112.134.112
addnode=106.68.126.251
addnode=195.38.122.80
addnode=162.243.4.85
addnode=62.221.120.216
addnode=49.66.59.73
addnode=124.168.123.204
addnode=223.198.48.85
addnode=162.223.48.19
addnode=212.247.109.253
addnode=188.162.40.67
addnode=24.49.13.97
addnode=203.208.83.100
addnode=91.2.7.117
addnode=80.123.21.76
addnode=14.148.0.173
addnode=64.58.130.180
addnode=89.168.237.30
addnode=122.224.95.209
addnode=182.112.134.112
addnode=95.89.180.80
addnode=77.254.241.222
addnode=92.13.231.33

please try.

grassy-ass!

It took a little but finally got it working. Gracias!

Saving this to mintcoin.conf fixed the sync issue for me as well

.

Carlitos714

full member

Activity: 140

Merit: 100

Quote from: Danz0r77 on February 08, 2014, 01:56:17 PM

Quote from: Carlitos714 on February 08, 2014, 01:54:52 PM

Quote from: Danz0r77 on February 08, 2014, 01:49:06 PM

Quote from: Carlitos714 on February 08, 2014, 01:43:56 PM

Quote from: Danz0r77 on February 08, 2014, 01:29:37 PM

Quote from: Carlitos714 on February 08, 2014, 01:28:27 PM

Quote from: Danz0r77 on February 08, 2014, 12:50:00 PM

Can we spread the hash around a little. Our pool needs some more power:
http://mint.dogemoon.com

Thanks

Im on that pool with 3x 7970's.

Good stuff. Do you have any issues with it?

non at all why do you?

No I run it, I was just checking. Good to hear

sweet, I was also on your topcoin pool so now everytime I see dogemoon.com at the end of the pool, I make it my first choice. Good job man.

Haha, thanks for that. I'll knock off the fees for you for loyalty

Oh man thank you very much! I really appreciate it!

mintcointeam

sr. member

Activity: 325

Merit: 250

Linux compiled wallet available!

https://mega.co.nz/#!IsU02R7L!N6dED8Bf6maCbBuc50DgY5luz6GvS5P98m7mdybktpA

LightningFury

hero member

Activity: 687

Merit: 509

My peers.dat for sync

https://mega.co.nz/#!VwoxQLBY!3GowmOZCUVeHKSERgIWI_1NHQhnLCqyLMcRmlMEK_t4

MaSjycX71q6RLtnqASgBoAYeBErKES8RJ3

Maurizio

hero member

Activity: 770

Merit: 500

Is there a EXTRA giveaway for guys who struggled for hours with the wallet?

MuDPoyTLoWfVPPf5fnUjdi9FL9w8xF6pEh
Go on DEV is a real real nice one this MINT

Nullu

hero member

Activity: 532

Merit: 500

Quote from: David Latapie on February 08, 2014, 02:22:32 PM

I get a "cgminer.exe --scrypt: unrecognized option" error message. What can I do?

My bat file:

Code:

color 02
setx GPU_MAX_ALLOC_PERCENT 100
C:\Users\user\Downloads\cgminer-3.9.0-windows\cgminer.exe --scrypt -o stratum+tcp://mnt.allpoolz.com:3333 -u workerlogin -p workerpassword

Thanks

Which version are you running? 3.9.0? Scrypt was taken out after 3.7.2.

Get version 3.7.2. for Scrypt.

nequaquamvacui

newbie

Activity: 33

Merit: 0

Quote from: David Latapie on February 08, 2014, 02:22:32 PM

I get a "cgminer.exe --scrypt: unrecognized option" error message. What can I do?

My bat file:

Code:

color 02
setx GPU_MAX_ALLOC_PERCENT 100
C:\Users\user\Downloads\cgminer-3.9.0-windows\cgminer.exe --scrypt -o stratum+tcp://mnt.allpoolz.com:3333 -u workerlogin -p workerpassword

Thanks

I think scrypt is only supported up until version 3.7.2 of cgminer

Nullu

hero member

Activity: 532

Merit: 500

Quote from: mkonecny on February 08, 2014, 02:18:26 PM

Admittedly my understanding of POS coins is limited, but if this coins gives an interest rate of 20% for the first year, and 5% less each year afterwards, what's to stop someone from transferring all their coins to a new wallet after first year and get the 20% again.

Or is it 20% until Jan 2015 for everyone regardless of when they minted their coin.

The PoS rate is controlled by the network itself, not by the coins. If you transfer the coins you just reset the coin age, I think. You can't control the PoS rate anymore than you can change the difficulty or the payouts; it's built into the blockchain.

PoS takes a bit to get your head around, but basically coins age over time, and this age then determines when they will "mint" new coins. When coins reach PoS maturing, they enter the Stake section of your wallet; think of your stake coins like a hashrate for PoS mining; the more you have in the stake section of your wallet, the more PoS coins you can "mine". This is a continuous cycle as your coins age, move into stake, then reset. You can't really control it. You can force all your mature coins to become stake coins at once, but there's no real advantage to it other than speed up the wallet if it gets choked up on small transactions, affectionately known as "dust".

David Latapie

hero member

Activity: 658

Merit: 503

Monero Core Team

I get a "cgminer.exe --scrypt: unrecognized option" error message. What can I do?

My bat file:

Code:

color 02
setx GPU_MAX_ALLOC_PERCENT 100
C:\Users\user\Downloads\cgminer-3.9.0-windows\cgminer.exe --scrypt -o stratum+tcp://mnt.allpoolz.com:3333 -u workerlogin -p workerpassword

Thanks

mkonecny

newbie

Activity: 14

Merit: 0

Admittedly my understanding of POS coins is limited, but if this coins gives an interest rate of 20% for the first year, and 5% less each year afterwards, what's to stop someone from transferring all their coins to a new wallet after first year and get the 20% again.

Or is it 20% until Jan 2015 for everyone regardless of when they minted their coin.

boubou

full member

Activity: 196

Merit: 100

Quote from: dmgta on February 08, 2014, 01:48:22 PM

I will tip someone 250k mint if they work with me to get my wallet sync'd and im not interested in someone telling mde to add nodes or change my config file or delete and re install new wallet etc etc

i need someone to help me with firewall and router changes becase it is the only thing i can think of that is making this happen.

please join me here

http://webchat.freenode.net/
#dmgtahelp is the channel

if anyone else is having syncing issues join maybe we can figure this out together

I tryed but can't join your channel and send some text.

You changed in your Windows configuration the settings of the folders to see the extensions of the .txt files?

nequaquamvacui

newbie

Activity: 33

Merit: 0

Every proof of stake coin I know of has done relatively well so far, hasn't it?
Nxt is at 5 cent, Peercoin at 4.7 $, as soon as a PoS is worth something there is less incentive to dump it all, since you will earn interest on it.
Here you can have some fun with mining until it turns into almost pure PoS, I like the concept.
If the devs keep working hard on it, this could be a really good coin.

Danz0r77

hero member

Activity: 574

Merit: 504

Quote from: Bulldog_Duke on February 08, 2014, 01:58:51 PM

Quote from: dmgta on February 08, 2014, 12:56:44 PM

Quote from: Danz0r77 on February 08, 2014, 12:50:00 PM

Can we spread the hash around a little. Our pool needs some more power:
http://mint.dogemoon.com

Thanks

Moved a rig over there after the psot and the blocks ahve been VERY long since you posted. In fact, only one block completed. No exactly inspring. Moving off very quickly.

The blocks are slow because there's only 120MH/s. It takes longer to find the blocks. However, when one is found you get more coins as there are less miners to spread it over. Actually, you came at a bad time - that block was a VERY slow one. The 2 blocks before that were found at 2.46% and 11.19% est shares.

majorminers

full member

Activity: 168

Merit: 100

Miners needed! Mintcoin Mining is launched at Major Miners.

1) Go here to create your account.
2) Add your workers.
3) Point your miner at the server.
4) Mint those coins!

CGMiner

./cgminer --scrypt -o stratum+tcp://mint.majorminers.com:3334 -u Weblogin.Worker -p Worker password

BFGMiner

./bfgminer --scrypt -o stratum+tcp://mint.majorminers.com:3334 -u Weblogin.Worker -p Worker password

CPUMiner (Cloud Mining)

./minerd --url stratum+tcp://mint.majorminers.com:3334 -u Weblogin.Worker -p Worker password

1% fee. Professional staff to ensure a profitable mining experience.

niteryder

full member

Activity: 196

Merit: 100

We could use some MOAR power on allpoolz.com as well.

http://mnt.allpoolz.com

- DDOS
- 0% Fee
- US Server
- iOS Monitoring app.

nickenburg

sr. member

Activity: 434

Merit: 511

OK looks good i am mining in a pool right now for some awesome coins!

David Latapie

hero member

Activity: 658

Merit: 503

Monero Core Team

Hi,

How do I mine mintcoin? I have the wallet up and running, but the way I understood, I need something more (cgminer?)

I create a .bat file (I am on Windows) with this:

Code:

color 02
setx GPU_MAX_ALLOC_PERCENT 100
C:\Users\Administrateur\Downloads\cgminer-3.9.0-windows\cgminer.exe --scrypt -o stratum+tcp://mnt.allpoolz.com:3333 -u miner.1 -p x -I 13 -g 1 -w 64 --thread-concurrency 6144

And what are these "pool" and "stratum" things I keep hearing about everywhere?

Thank you.

Bulldog_Duke

newbie

Activity: 42

Merit: 0

Quote from: dmgta on February 08, 2014, 12:56:44 PM

Quote from: Danz0r77 on February 08, 2014, 12:50:00 PM

Can we spread the hash around a little. Our pool needs some more power:
http://mint.dogemoon.com

Thanks

Moved a rig over there after the psot and the blocks ahve been VERY long since you posted. In fact, only one block completed. No exactly inspring. Moving off very quickly.

Topic: [ANN] [MINT] Mintcoin (POS / 5%) [NO ICO] [Fair distro, community maintained] - page 995. (Read 1369788 times)