Buy a few and trade up you'll a masternode in no time! 
Did someone get the next stream of airdrop? #
# ###########################
# raspbian-stretch (tested with version of 2017-09-07) on a Raspberry Pi 3 with 16 GiB sdcard
# (running from a user-account with sudo rights)
# ###########################
#
#
# Install dependencies
#
sudo apt-get update
sudo apt-get install git build-essential qt5-default libtool autotools-dev autoconf pkg-config libssl-dev libprotobuf-dev protobuf-compiler libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev
sudo apt-get install libssl1.0-dev libssl1.0.2 # downgrade SSL from 1.1 to 1.0.2
# set the swap space on sd-card to 2 GB (the amount of physical memory is insufficient)
sudo su -
echo "CONF_SWAPSIZE=2048" > /etc/dphys-swapfile
systemctl restart dphys-swapfile
exit # exit root shell to be logged in as user again
#
# Build Berkeley DB
# Debian 9 ships with version 5.3 but this wallet needs older version 4.8
# The required version is not hosted in the newer debian repositories, so we need to compile on our own.
#
# Fetch the source
cd ~
wget 'http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz'
# verify it's really the file we are looking for
echo '12edc0df75bf9abd7f82f821795bcee50f42cb2e5f76a6a281b85732798364ef db-4.8.30.NC.tar.gz' | sha256sum -c
# ONLY CONTINUE if there is no error - should be a line like this:
# -> db-4.8.30.NC.tar.gz: OK
tar -xzvf db-4.8.30.NC.tar.gz
# Build the library and install to /usr/local
cd db-4.8.30.NC/build_unix/
../dist/configure --prefix=/usr/local --enable-cxx
make -j4 # compile on 4 cores
sudo make install # copy compiled files to /usr/local
# You can delete db-4.8.30.NC.tar.gz file and db-4.8.30.NC folder now if you like.
# I added LD_LIBRARY_PATH to my .bashrc, so the bdb lib can be found by the executable we will compile later on
export LD_LIBRARY_PATH="/usr/local/lib/"
#
# Get MasterNodeCoin sources from github and compile it
#
cd ~
mkdir masternodecoin
cd masternodecoin
git clone https://github.com/masternodecoin/masternodecoin.git .
# these scripts need to be executable
chmod +x src/leveldb/build_detect_platform
chmod +x src/secp256k1/autogen.sh
# workaround because lrelease is not working on raspi - it never starts...
# so qmake would never end. we just create a dummy executable which does nothing
sudo touch dummy.sh
sudo chmod +x dummy.sh
sudo mv dummy.sh /usr/bin/
sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease
# ensure using the right version of qt
export QT_SELECT=qt5
# Now we can build the MasterNodeCoin-QT binary ...
qmake
make # compile.. this will take ages, wait patiently ;)
# ... and copy the resulting binary to bin-folder
sudo cp Masternodecoin-qt /usr/bin/Masternodecoin
# to run it simply type "Masternodecoin" to a terminal
# or create a link to the binary in the start-menu / on the desktop
# Data (Blockchain and wallet.dat) is saved to ~/.Masternodecoin
I hope that it will fit my operating system. I will soon move from Windows to Linux. #
# ###########################
# raspbian-stretch (tested with version of 2017-09-07) on a Raspberry Pi 3 with 16 GiB sdcard
# (running from a user-account with sudo rights)
# ###########################
#
#
# Install dependencies
#
sudo apt-get update
sudo apt-get install git build-essential qt5-default libtool autotools-dev autoconf pkg-config libssl-dev libprotobuf-dev protobuf-compiler libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev
sudo apt-get install libssl1.0-dev libssl1.0.2 # downgrade SSL from 1.1 to 1.0.2
# set the swap space on sd-card to 2 GB (the amount of physical memory is insufficient)
sudo su -
echo "CONF_SWAPSIZE=2048" > /etc/dphys-swapfile
systemctl restart dphys-swapfile
exit # exit root shell to be logged in as user again
#
# Build Berkeley DB
# Debian 9 ships with version 5.3 but this wallet needs older version 4.8
# The required version is not hosted in the newer debian repositories, so we need to compile on our own.
#
# Fetch the source
cd ~
wget 'http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz'
# verify it's really the file we are looking for
echo '12edc0df75bf9abd7f82f821795bcee50f42cb2e5f76a6a281b85732798364ef db-4.8.30.NC.tar.gz' | sha256sum -c
# ONLY CONTINUE if there is no error - should be a line like this:
# -> db-4.8.30.NC.tar.gz: OK
tar -xzvf db-4.8.30.NC.tar.gz
# Build the library and install to /usr/local
cd db-4.8.30.NC/build_unix/
../dist/configure --prefix=/usr/local --enable-cxx
make -j4 # compile on 4 cores
sudo make install # copy compiled files to /usr/local
# You can delete db-4.8.30.NC.tar.gz file and db-4.8.30.NC folder now if you like.
# I added LD_LIBRARY_PATH to my .bashrc, so the bdb lib can be found by the executable we will compile later on
export LD_LIBRARY_PATH="/usr/local/lib/"
#
# Get MasterNodeCoin sources from github and compile it
#
cd ~
mkdir masternodecoin
cd masternodecoin
git clone https://github.com/masternodecoin/masternodecoin.git .
# these scripts need to be executable
chmod +x src/leveldb/build_detect_platform
chmod +x src/secp256k1/autogen.sh
# workaround because lrelease is not working on raspi - it never starts...
# so qmake would never end. we just create a dummy executable which does nothing
sudo touch dummy.sh
sudo chmod +x dummy.sh
sudo mv dummy.sh /usr/bin/
sudo ln -s /usr/bin/dummy.sh /usr/lib/arm-linux-gnueabihf/qt5/bin/lrelease
# ensure using the right version of qt
export QT_SELECT=qt5
# Now we can build the MasterNodeCoin-QT binary ...
qmake
make # compile.. this will take ages, wait patiently ;)
# ... and copy the resulting binary to bin-folder
sudo cp Masternodecoin-qt /usr/bin/Masternodecoin
# to run it simply type "Masternodecoin" to a terminal
# or create a link to the binary in the start-menu / on the desktop
# Data (Blockchain and wallet.dat) is saved to ~/.Masternodecoin
