★[ANN] [NAV] NAV COIN - Community Fund Live!!! - page 373.

KryptOre

newbie

Activity: 16

Merit: 0

Here is a few more addnodes

addnode=1.34.180.245
addnode=104.236.223.182
addnode=14.218.56.146
addnode=14.218.68.15
addnode=155.94.190.189
addnode=175.139.60.22
addnode=175.214.144.141
addnode=176.154.77.92
addnode=185.61.148.209
addnode=2.121.162.167
addnode=2.121.28.222
addnode=2.121.4.181
addnode=2.84.167.61
addnode=208.95.215.81
addnode=212.180.171.44
addnode=213.108.119.84
addnode=217.248.39.11
addnode=217.248.56.246
addnode=45.50.28.121
addnode=45.59.171.33
addnode=73.246.201.74
addnode=73.254.153.254
addnode=73.35.112.73
addnode=84.84.197.176
addnode=86.173.93.180
addnode=91.153.109.149
addnode=95.183.50.54
addnode=95.183.51.15
addnode=95.183.53.184

Sjacmur

hero member

Activity: 882

Merit: 500

with this conf I have 1 active connection to nethwork and not started yet synchro but I just turn on wallet with this conf so maybe need some more time (minutes) to more connection and synchronise.
I tell soon if full work.
Thx for helping.

shahim

legendary

Activity: 1082

Merit: 1002

hmm k.

Please use this conf:

rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44444
port=44440
listen=1
daemon=1
server=1
addnode=95.183.51.15
addnode=5.230.145.133
addnode=95.183.53.184
addnode=95.183.50.54

copy it to "navcoin.conf" . I just tested it and it starts directly to sync.

Sorry for problems you have mate.

Sjacmur

hero member

Activity: 882

Merit: 500

Quote from: shahim on June 19, 2016, 07:59:47 AM

Quote from: Sjacmur on June 19, 2016, 05:57:52 AM

Quote from: bitwho on June 18, 2016, 04:41:41 PM

Quote from: Sjacmur on June 18, 2016, 03:42:08 PM

I dont know how and wchich port Huh

And I dont run other wallet coins so not use other ports.
Just download wallet and run , closed, copy config, now copy more addnodes but always have 0 connection wtf
Its f**** winndows wallet will work for every simple user not after complicated configurate open ports or other shit.
I download and run and dont work. Its shit for me sorry !!!
When I run first time I click on windows firewall accept to run with publick nethwork or something.
Like usual in other wallet and oldest version nav wallet. But 2 days I have 0 connection to nethwork.
You cant avaible make working windows wallet Huh

?

try what i mentioned.

close your Nav wallet completely.

open the config file. in your config file. where you added the addnodes. change the port into a number between 9000-9999, say 9470

then save and close the .conf file.

then open the wallet and give it 10 -15 mins.

let us know if that works

Not working. 2-3 hours and still 0 connection.
I change port in config to 9500. Look:
port=9500
rpcport=44444

I must change rpcport too ?? for what number ? I dont change yet this. Why not working omg.

HI,

what is that for a zip you loaded? The 3.5 Zip do not have a conf file in it. Please use this config:

rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44444
port=44440
listen=1
daemon=1
server=1
addnode=95.183.51.15
addnode=5.230.145.133
addnode=95.183.53.184
addnode=95.183.50.54

perhaps also post something out of the debug.log, if it is still not working. we have several windows wallets without these problems.

regards
shahim

I downloaded windows wallet new NAV 2.0 version 3.5 name file: NavCoin_3.5.0_Windows_Wallet from your website: http://www.navcoin.org/downloads
Download yourself and you see in wallet navcoin.conf inside this:

rpcuser=USERNAME
rpcpassword=PASSWORD
rpcallowip=*
listen=1
port=44440
rpcport=44444
server=1
daemon=1
mnconflock=0
addnode=95.183.53.184

So I copy this conf to appdata->roaming like usual. In roaming wallet maked folder: NavCoin2 so I copy this config there.
BUT without config not working and with config not working.
I change port to 9500 like other person sugestion but not help.
And I dont know why "rpcallowip=* " what is * Huh

I put here from old nav conf 127.0.0.1 but not help too.
If something wrong with this config correct them because is on download on website.
I add again ALL your config and tell after work or not.

shahim

legendary

Activity: 1082

Merit: 1002

Quote from: bspus on June 19, 2016, 06:18:05 AM

Quote from: compmaster on June 18, 2016, 06:37:43 PM

I have a NAV paper wallet. So that wallet no longer works and my coins are gone? I hope not Sad

Isn't the old network still active for the swap period?
If you can send the NAV to another address you should stil, be able to swap.

Or maybe you can sync a client (old wallet) and import the wallet in it?

correct! You are still able to swap.

regards
shahim

shahim

legendary

Activity: 1082

Merit: 1002

Quote from: Sjacmur on June 19, 2016, 05:57:52 AM

Quote from: bitwho on June 18, 2016, 04:41:41 PM

Quote from: Sjacmur on June 18, 2016, 03:42:08 PM

I dont know how and wchich port Huh

And I dont run other wallet coins so not use other ports.
Just download wallet and run , closed, copy config, now copy more addnodes but always have 0 connection wtf
Its f**** winndows wallet will work for every simple user not after complicated configurate open ports or other shit.
I download and run and dont work. Its shit for me sorry !!!
When I run first time I click on windows firewall accept to run with publick nethwork or something.
Like usual in other wallet and oldest version nav wallet. But 2 days I have 0 connection to nethwork.
You cant avaible make working windows wallet Huh

?

try what i mentioned.

close your Nav wallet completely.

open the config file. in your config file. where you added the addnodes. change the port into a number between 9000-9999, say 9470

then save and close the .conf file.

then open the wallet and give it 10 -15 mins.

let us know if that works

Not working. 2-3 hours and still 0 connection.
I change port in config to 9500. Look:
port=9500
rpcport=44444

I must change rpcport too ?? for what number ? I dont change yet this. Why not working omg.

HI,

what is that for a zip you loaded? The 3.5 Zip do not have a conf file in it. Please use this config:

rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=44444
port=44440
listen=1
daemon=1
server=1
addnode=95.183.51.15
addnode=5.230.145.133
addnode=95.183.53.184
addnode=95.183.50.54

perhaps also post something out of the debug.log, if it is still not working. we have several windows wallets without these problems.

regards
shahim

bspus

legendary

Activity: 2165

Merit: 1002

Quote from: compmaster on June 18, 2016, 06:37:43 PM

I have a NAV paper wallet. So that wallet no longer works and my coins are gone? I hope not Sad

Isn't the old network still active for the swap period?
If you can send the NAV to another address you should stil, be able to swap.

Or maybe you can sync a client (old wallet) and import the wallet in it?

Sjacmur

hero member

Activity: 882

Merit: 500

Quote from: bitwho on June 18, 2016, 04:41:41 PM

Quote from: Sjacmur on June 18, 2016, 03:42:08 PM

I dont know how and wchich port Huh

And I dont run other wallet coins so not use other ports.
Just download wallet and run , closed, copy config, now copy more addnodes but always have 0 connection wtf
Its f**** winndows wallet will work for every simple user not after complicated configurate open ports or other shit.
I download and run and dont work. Its shit for me sorry !!!
When I run first time I click on windows firewall accept to run with publick nethwork or something.
Like usual in other wallet and oldest version nav wallet. But 2 days I have 0 connection to nethwork.
You cant avaible make working windows wallet Huh

?

try what i mentioned.

close your Nav wallet completely.

open the config file. in your config file. where you added the addnodes. change the port into a number between 9000-9999, say 9470

then save and close the .conf file.

then open the wallet and give it 10 -15 mins.

let us know if that works

Not working. 2-3 hours and still 0 connection.
I change port in config to 9500. Look:
port=9500
rpcport=44444

I must change rpcport too ?? for what number ? I dont change yet this. Why not working omg.

compmaster

sr. member

Activity: 476

Merit: 250

Quote from: sluppy on June 17, 2016, 04:31:24 AM

Quote from: hashforce101 on June 17, 2016, 04:12:11 AM

Quote from: pakage on June 07, 2016, 03:45:15 AM

Manual Coin Swap

Dear Nav Community,

Some update on our progress over the last week. The Bittrex Coin Swap went very smoothly. No reported problems from Bittrex, they were happy with how it went and the new block chain appears to be functioning perfectly. In the end we had 47.5 Million coins swapped out of a total of 59 Million! That's a pretty high percentage for the first stage of the swap as we can all agree. We published to as many crypto news sources as we could and we think the word got spread quite well! Thanks for your help spreading the word via social media etc over the last few weeks! We will keep you updated on this figure as the manual swap comes to a close. I would guess that once Poloniex switches over and some of the late comers swap their coins the amount left will be pretty close to the amount we believe is tied up in the dead exchanges.

At this stage we are looking to have the manual swap open for 1 month since we have some delays with Poloniex but we will confirm this. We may even extend it further to make sure no one misses out!

I have modified a version of the old wallet to allow the input of a Nav 2.0 address where we send the new coins to. I have also programmed a NodeJS server to perform the coin swap. This is actually the backbone of what I am porting the anonymous network to use, so this code also counts towards some percentage of the decentralisation work!

Instructions on how to perform the manual swap can be found on our website: http://navcoin.org/upgrade

It's pretty simple, all you need is the latest version of the old Nav Wallet which I've uploaded, a Nav 2.0 wallet address and our swap address which is posted in the instructions.

I don't like to post wallet addresses for official business or direct links in my announcement posts because its easy for someone to quote the post and change it.

Please visit the website for the full instructions!

As for our other projects, we can finally start to move forward again with them. I will resume my weekly updates to keep everyone in the loop!

All the best,
Craig.

47.5 Million coins swapped out of a total of 59 Million!

Leaving 11.1 million to be manually swapped -

The Auto swap occurred around 7th June as above with great success - adding a Month gives us a Deadline of 7th of July

Can we get Polo situation and/or Deadline date announced to the NAV Community would be great.

You can still buy old coins off POLO! Grin

or the NEW NAV 2.0 coins off Bittrex

We have to assume Cryptsy coins are part of that 11mln (I hope) so basically 6 mln or so unswapped that's pretty good.
(I'm really happy about locking out the Cryptsy coins so their not hanging over our heads ready to drop the second Mr Vern sees fit to dump them.)

I have a NAV paper wallet. So that wallet no longer works and my coins are gone? I hope not Sad

hashforce101

legendary

Activity: 1050

Merit: 1000

Imagine NAV gets Decentralized next Month. Would you be ready?

bitwho

legendary

Activity: 1274

Merit: 1000

Quote from: Sjacmur on June 18, 2016, 03:42:08 PM

I dont know how and wchich port Huh

And I dont run other wallet coins so not use other ports.
Just download wallet and run , closed, copy config, now copy more addnodes but always have 0 connection wtf
Its f**** winndows wallet will work for every simple user not after complicated configurate open ports or other shit.
I download and run and dont work. Its shit for me sorry !!!
When I run first time I click on windows firewall accept to run with publick nethwork or something.
Like usual in other wallet and oldest version nav wallet. But 2 days I have 0 connection to nethwork.
You cant avaible make working windows wallet Huh

?

try what i mentioned.

close your Nav wallet completely.

open the config file. in your config file. where you added the addnodes. change the port into a number between 9000-9999, say 9470

then save and close the .conf file.

then open the wallet and give it 10 -15 mins.

let us know if that works

Sjacmur

hero member

Activity: 882

Merit: 500

I dont know how and wchich port Huh

And I dont run other wallet coins so not use other ports.
Just download wallet and run , closed, copy config, now copy more addnodes but always have 0 connection wtf
Its f**** winndows wallet will work for every simple user not after complicated configurate open ports or other shit.
I download and run and dont work. Its shit for me sorry !!!
When I run first time I click on windows firewall accept to run with publick nethwork or something.
Like usual in other wallet and oldest version nav wallet. But 2 days I have 0 connection to nethwork.
You cant avaible make working windows wallet Huh

?

bitwho

legendary

Activity: 1274

Merit: 1000

Quote from: Sjacmur on June 18, 2016, 02:58:08 PM

Quote from: shahim on June 18, 2016, 12:57:10 PM

Quote from: Sjacmur on June 18, 2016, 12:25:39 PM

working few times for 2-3 hours without any connection always was 0.

Use this addndoes:

addnode=95.183.51.15
addnode=5.230.145.133
addnode=95.183.53.184
addnode=95.183.50.54

regards

after 3 hours still 0 connection with this addnone in config.

have you opened the port in your firewalls?

try this. to any one having hard time synching. use a port between 9000-9999

make sure that port is not being used by an other coin wallet currently open.

good luck

edit: i mean you can either try to open the port via your firewall (port-forwarding). or you can use .cong file to set a port bellow 10000. maybe even below 9800. i think some windows firewalls or antivirus automatically block ports above that. Thus use ones that they do not automatically block. do not use anything bellow 8000 as it is probably reserved for hardware or other defaults.

this could help. but it could not. I noticed when i put ports above 10000 i get blocked and i have to manually instruct(for other things non related to NAV)

Sjacmur

hero member

Activity: 882

Merit: 500

Quote from: shahim on June 18, 2016, 12:57:10 PM

Quote from: Sjacmur on June 18, 2016, 12:25:39 PM

working few times for 2-3 hours without any connection always was 0.

Use this addndoes:

addnode=95.183.51.15
addnode=5.230.145.133
addnode=95.183.53.184
addnode=95.183.50.54

regards

after 3 hours still 0 connection with this addnone in config.

shahim

legendary

Activity: 1082

Merit: 1002

Quote from: Sjacmur on June 18, 2016, 12:25:39 PM

working few times for 2-3 hours without any connection always was 0.

Use this addndoes:

addnode=95.183.51.15
addnode=5.230.145.133
addnode=95.183.53.184
addnode=95.183.50.54

regards

Sjacmur

hero member

Activity: 882

Merit: 500

working few times for 2-3 hours without any connection always was 0.

hennessj

member

Activity: 373

Merit: 10

The World’s First Blockchain Core

Quote from: Sjacmur on June 17, 2016, 11:50:54 AM

Why I downloaded windows wallet 3.5.0 and copy config to roaming but I have 0 connections ? From nav www site /download

2 hours with few restart wallet and nothing still 0 connection to nethwork.
I use config from wallet zip files with 1 node. Or I deleted all and try without config but not working too. Wallet run but 0 connections and not synchring.
I see sometimes after run wallet small blink white dot on field when show how many connection but for miliseconds and disapear again and I have 0 connection always !!!
wtf with this wallet, Windows 7 sp1.

is this config correct ? from wallet zip from www site:
I have second day 0 connection to nethwork

rpcuser=USERNAME
rpcpassword=PASSWORD
rpcallowip=*
listen=1
port=44440
rpcport=44444
server=1
daemon=1
mnconflock=0
addnode=95.183.53.184

I have had that problem intermittently the last week or so. Eventually the wallet goes online and catches up.

sluppy

legendary

Activity: 2020

Merit: 1041

Quote from: juguelio on June 17, 2016, 11:43:41 AM

Off Topic

And one day DAO and Ethereum got hacked...

Anon coins will be back and NAV is the king!

Ethereum didn't get hacked.
Just DAO but Ethereum will bleed for it. to lose 2 mln ethereum not so great.
Whatever they do to try and fix it their reputation will take a huge hit.

hashforce101

legendary

Activity: 1050

Merit: 1000

Quote from: chemal on June 17, 2016, 10:03:51 AM

Ofc Nav !
Nav 2.0 sounds so stupid... hash you have too much free time,dont you?

Nay just reading to many resumes.

It's called attention to detail and NAV has my full attention

Also have a look at the Polo spike Buy Orders date and time Wink

Sjacmur

hero member

Activity: 882

Merit: 500

Why I downloaded windows wallet 3.5.0 and copy config to roaming but I have 0 connections ? From nav www site /download

2 hours with few restart wallet and nothing still 0 connection to nethwork.
I use config from wallet zip files with 1 node. Or I deleted all and try without config but not working too. Wallet run but 0 connections and not synchring.
I see sometimes after run wallet small blink white dot on field when show how many connection but for miliseconds and disapear again and I have 0 connection always !!!
wtf with this wallet, Windows 7 sp1.

is this config correct ? from wallet zip from www site:
I have second day 0 connection to nethwork

rpcuser=USERNAME
rpcpassword=PASSWORD
rpcallowip=*
listen=1
port=44440
rpcport=44444
server=1
daemon=1
mnconflock=0
addnode=95.183.53.184

Topic: ★[ANN] [NAV] NAV COIN - Community Fund Live!!! - page 373. (Read 2085654 times)