[ANN] Neutron Crypto Coin Project (NTRN) Version 4.0.1 available now. - page 44.

TheKingInYellow

sr. member

Activity: 546

Merit: 257

Have you found the Yellow Sign?

I had a headache setting up the MN as well and was told it will be much more streamlined in the next wallet release. I stake my coins pending then.

polylogic

sr. member

Activity: 546

Merit: 254

ʕʘ̅͜ʘ̅ʔ

Quote from: Paltus on August 14, 2017, 08:38:45 AM

Quote from: polylogic on August 13, 2017, 03:32:39 PM

thanks for trying to help.
this is really frustrating. i tried all that and im sure i do everything right.
i mean, what can you do wrong, send 25k to masternode-tab generated address
maybe its because of windows 8.

you need staking=0 in neutron.conf to disable staking
it wont get disabled in masternode.conf only.
i figures that out when i was trying to run without neutron.conf

i renamed the folder and started from scatch (with old blockchain)
i noticed the configuration like advanced coin control was still activated.
maybe it gets saved in windows registry?
where does the masternode "config" with txid and idx, the vin gets saved?

now i try the same wallet in a different pc.
guess i should try reinstalling the vps

I have similar problem. Masternode worked. Then I updated to wallet 1.1.1, created Nucleus node, started it (Adrenaline node at ... started), but no more income.
Collateral address is ok, masternode key is ok, staking=0 in masternode.conf, but no rewards anymore.
What am I doing wrong ?

at least your node is starting. my wont start. like there is no money in the bank. but it is Undecided

i think you have to wait a little more. how long did you wait? give it 24-48h or even 72h.
if you didnt get paid by then then something is messed up.

do you guys wait the 10 confirmations of the 0.01 Fee and then start?
i think my vin is incorrect. the error message pops up like it already knew it was wrong.
i removed the config (be carefull, all nodes get deleted), tried a couple more times on the same pc. no vin allocation.
i try a 3rd computer.

i saw that xcxt masternodes uses the same config system (is it from pivx?) but they dont use the masternode.conf, everything gets set in "coinname".conf
i already spend 0.5 NTRN on fees to send from x to Y and back again, i make you guys rich :p

actualy the situation is kinda messed up und very unpleasant for newcomers or people that may want to join the train before it gets too fast.
nobody want to buy the coin if the tec is not working Sad

on a sidenote: with maxconnections limited and staking only the wallet doesnt freeze.

Paltus

member

Activity: 75

Merit: 10

Quote from: polylogic on August 13, 2017, 03:32:39 PM

thanks for trying to help.
this is really frustrating. i tried all that and im sure i do everything right.
i mean, what can you do wrong, send 25k to masternode-tab generated address
maybe its because of windows 8.

you need staking=0 in neutron.conf to disable staking
it wont get disabled in masternode.conf only.
i figures that out when i was trying to run without neutron.conf

i renamed the folder and started from scatch (with old blockchain)
i noticed the configuration like advanced coin control was still activated.
maybe it gets saved in windows registry?
where does the masternode "config" with txid and idx, the vin gets saved?

now i try the same wallet in a different pc.
guess i should try reinstalling the vps

I have similar problem. Masternode worked. Then I updated to wallet 1.1.1, created Nucleus node, started it (Adrenaline node at ... started), but no more income.
Collateral address is ok, masternode key is ok, staking=0 in masternode.conf, but no rewards anymore.
What am I doing wrong ?

cedlemercier

full member

Activity: 182

Merit: 100

Quote from: polylogic on August 14, 2017, 04:26:31 AM

Quote from: ?? on ??

I started staking with 25.000 Neutrons.
I get about 20 Neutrons a day.
How much does a masternode get? Is it better to run a masternode?

let me know if you have no problem starting the node.

i tried to load the blockchain from cryptochainer.com but the wallet just ignorged it and still loads the chain normal.
with one exeption: blk0001.dat seems to be bigger than usual xD

Yes, neutron wallet is long to start and is instable on my WINDOWS.
But rewards come every days.
Return of investissement is very good
I hope à update wallet soon, i think wallet need update

polylogic

sr. member

Activity: 546

Merit: 254

ʕʘ̅͜ʘ̅ʔ

Quote from: ?? on ??

I started staking with 25.000 Neutrons.
I get about 20 Neutrons a day.
How much does a masternode get? Is it better to run a masternode?

let me know if you have no problem starting the node.

i tried to load the blockchain from cryptochainer.com but the wallet just ignorged it and still loads the chain normal.
with one exeption: blk0001.dat seems to be bigger than usual xD

cedlemercier

full member

Activity: 182

Merit: 100

Quote from: ?? on ??

I started staking with 25.000 Neutrons.
I get about 20 Neutrons a day.
How much does a masternode get? Is it better to run a masternode?

With masternode, it's better i have 70-80 neutrons per days.

polylogic

sr. member

Activity: 546

Merit: 254

ʕʘ̅͜ʘ̅ʔ

devs, is there a difference between the windows zip and the setup wallet?
i used the zip maybe i have more luck with the setup
i could imagen the setup copies some files for masternode which i am missing and theirfor cannot launch the masternode.
or is it blockchain related?

good thing the blockchain is up for download and i can try some things quickly...
other people are running masternodes... why does my not work hmpf im loosing money everyday Wink

and it looks like its somehow wallet related.
i guess noone would be able to run masternodes if that were the case aw man

Filmmmakerr

sr. member

Activity: 518

Merit: 251

Hello. Bye.

Lol, so many coins to choose from now. Its making it harder and harder to trust Devs.

polylogic

sr. member

Activity: 546

Merit: 254

ʕʘ̅͜ʘ̅ʔ

Quote from: greenhope on August 13, 2017, 02:48:31 PM

@polylogic

You can get the masternode.conf from Necleus =>My Necleus Nodes.
Just click Get Config and copy & paste it and make some changes to make a masternode.conf
You're supposed not to need neutron.conf anymore for the new wallet, but I'm not sure if you need staking=0 on it.

I think the freezing is caused by scanning masternodes. and probably the code needs to be reworked.

I followed this instruction, and has no problem starting a masternode.
https://steemit.com/altcoin/@renk/guide-on-how-to-setup-a-neutron-usdntrn-masternode
My problem is it goes to offline every time in a couple of hours.

By the way, I could restart my masternode by sending the coins(25000) inside the collateral address again
to the same collateral address whenever I get the error message.

thanks for trying to help.
this is really frustrating. i tried all that and im sure i do everything right.
i mean, what can you do wrong, send 25k to masternode-tab generated address
maybe its because of windows 8.

you need staking=0 in neutron.conf to disable staking
it wont get disabled in masternode.conf only.
i figures that out when i was trying to run without neutron.conf

i renamed the folder and started from scatch (with old blockchain)
i noticed the configuration like advanced coin control was still activated.
maybe it gets saved in windows registry?
where does the masternode "config" with txid and idx, the vin gets saved?

now i try the same wallet in a different pc.
guess i should try reinstalling the vps

greenhope

full member

Activity: 446

Merit: 105

@polylogic

You can get the masternode.conf from Necleus =>My Necleus Nodes.
Just click Get Config and copy & paste it and make some changes to make a masternode.conf
You're supposed not to need neutron.conf anymore for the new wallet, but I'm not sure if you need staking=0 on it.

I think the freezing is caused by scanning masternodes. and probably the code needs to be reworked.

I followed this instruction, and has no problem starting a masternode.
https://steemit.com/altcoin/@renk/guide-on-how-to-setup-a-neutron-usdntrn-masternode
My problem is it goes to offline every time in a couple of hours.

By the way, I could restart my masternode by sending the coins(25000) inside the collateral address again
to the same collateral address whenever I get the error message.

polylogic

sr. member

Activity: 546

Merit: 254

ʕʘ̅͜ʘ̅ʔ

Quote from: polylogic on August 12, 2017, 12:50:31 PM

any ideas how to fix error

Code:

could not allocate vin for collateral address

address has the 25000, already at 31 confirmations
i tried to send from another address (same wallet) to collateral
i tried to send from the same address (same wallet)
i didnt try from a second wallet (different pc)

i tried to start the node with locked wallet
i tried to start the node with unlocked wallet

i cant imagen why this error happens

from debug console:

Code:

mastenode start
- you must set masternode=1 in configuration

masternode start-many
- your wallet is locked

masternode start-many
- "overall" : "Successfully started 0 masternodes, failed to start 0, total 0",

masternode debug
- not capable masternode: Darksend Masternode List doesn't include our masternode, Shutting down masternode pinging service! CTxIn(COutPoint(0000000000, 4294967295), coinbase )

so now i create a neutron.conf with masternode=1
but i dont have much hope.

i also can confirm that the wallet is unresonsive every 10sec for 20 sec
maybe too much connections as this wont happen right after launching the wallet.

no ideas?
wtf why doesnt it work? Sad

i created a new wallet, still the same problem.
guess ill have to delete the neutron folder next.

can i get a slack invite?

wallet#2 -> collateral = not working
collateral -> collateral = not working
collateral -> address 0 = not working
address 0 -> collateral = not working
collateral -> collateral (after wallet restart) = not working

in chaincoin you have to unlock the coins in send coins input but its not possible here.

linux masternode doesnt seem possible because the masternodes gets managed via ui
debug console is not much help but i try to work with it now..
sorry guys but you messed up the masternodes Roll Eyes

stillmad

brand new

Activity: 0

Merit: 0

Quote from: AltsBoom on August 04, 2017, 01:20:12 PM

Well done neutron, I sold my entire bag before the new life of the coin and price pump

I wish you happiness and wealth without me ;(

never too late to get back in bro

greenhope

full member

Activity: 446

Merit: 105

Quote from: Filmmmakerr on August 13, 2017, 01:12:00 AM

How much is master node on this coin?

You need 25000 neutron for a masternode.

pwpwpw

hero member

Activity: 908

Merit: 503

Right there in the original post: PoS Coin Maturity: 5h (hiPOS). Staking starts after 5 hours.

Filmmmakerr

sr. member

Activity: 518

Merit: 251

Hello. Bye.

How much is master node on this coin?

greenhope

full member

Activity: 446

Merit: 105

Well I gave up on running a masternode for now.
Tried several times, but it keep going offline every couple of hours.

Will try with a new wallet when it gets here.
For now it is only wallet I see debug log is bigger than blockchain in 24 hours.lol
Also not responding every few seconds and it is a big pain in ass to do something on it.

What is a best way to stop masternode and make it stake?
Stop it and change the line to staking=1 on neutron.conf and change the name of masternode.conf?

By the way, should I try with previous version of wallet?

pshemek

sr. member

Activity: 434

Merit: 250

dont use yobit. i have heard stories but thinked i will give them a try they are a big exchange so if all i heard was true they must been dead now. that costed me 25k ntrn in a stock wallet. stupid me.

polylogic

sr. member

Activity: 546

Merit: 254

ʕʘ̅͜ʘ̅ʔ

any ideas how to fix error

Code:

could not allocate vin for collateral address

address has the 25000, already at 31 confirmations
i tried to send from another address (same wallet) to collateral
i tried to send from the same address (same wallet)
i didnt try from a second wallet (different pc)

i tried to start the node with locked wallet
i tried to start the node with unlocked wallet

i cant imagen why this error happens

from debug console:

Code:

mastenode start
- you must set masternode=1 in configuration

masternode start-many
- your wallet is locked

masternode start-many
- "overall" : "Successfully started 0 masternodes, failed to start 0, total 0",

masternode debug
- not capable masternode: Darksend Masternode List doesn't include our masternode, Shutting down masternode pinging service! CTxIn(COutPoint(0000000000, 4294967295), coinbase )

so now i create a neutron.conf with masternode=1
but i dont have much hope.

i also can confirm that the wallet is unresonsive every 10sec for 20 sec
maybe too much connections as this wont happen right after launching the wallet.

TimC

legendary

Activity: 1764

Merit: 1022

Quote from: the-doctor on August 12, 2017, 03:33:39 AM

That's great news dev. Keep it up..! (although I am stuck at yobit.. Sad

There is a good chance that you will never get coins off Yobit. Yobit does not care about anything other then exchange fees. That is why they never answer support tickets. They only care about make money of exchange fees. They only let coins in so they can make fees while the coins is being hyped and then they will never support the coin or update the wallet. They might get to it if NTRN pumps on bittrex and then all of a sudden the wallet will be fixed like it has on their other 'broken' wallets that Yobit held. It just may be part of the operating procedures since once the wallet goes into 'maintenance' then all of a sudden that coin pumps. If you want to help the Crypto World then stop using crappy scammer exchanges like Yobit. They are the roach motel of the crypto exchange. 'Coins go in but they do not come out'

the-doctor

full member

Activity: 542

Merit: 101

That's great news dev. Keep it up..! (although I am stuck at yobit.. Sad

Topic: [ANN] Neutron Crypto Coin Project (NTRN) Version 4.0.1 available now. - page 44. (Read 134233 times)