Topic: [ANN] [PASC] PascalCoin, true deletable blockchain - V3 Hardfork on block 210000 - page 255. (Read 990783 times)
January 27, 2017, 09:58:55 AM
Please can someone share a link to the 0.1 miner I only have 0.2
January 27, 2017, 09:56:28 AM
By the way.
The older miner 0.1, ONLY WORKS ON WINDOWS 7 WITH THE RX 470/480. With Windows 10 it crashes on start.....
Really wish AMD would fix the drivers finally for these newer cards.
The older miner 0.1, ONLY WORKS ON WINDOWS 7 WITH THE RX 470/480. With Windows 10 it crashes on start.....
Really wish AMD would fix the drivers finally for these newer cards.
January 27, 2017, 09:53:23 AM
Speeds are pretty good with miner 0.1 on the RX 470 4GB.
However this damn miner crashes alot and requires a full reboot to re-run. Getting really annoying to the point of just wanting to go back to ETH mining.
With 0.2 it never crashed, but didn't find a single block.
However this damn miner crashes alot and requires a full reboot to re-run. Getting really annoying to the point of just wanting to go back to ETH mining.
With 0.2 it never crashed, but didn't find a single block.
So you say that dev specialy bugged miner for pumping time? Prices going down, so now they will release fix ;-)
January 27, 2017, 09:51:55 AM
!!!!!!!!!!!!!!!!!!!!!HHEEEEEEEELP!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Exception at 000000010004492C: EAccessViolation:
Access violation
Error pls help 6x MSI RX 480 GAMING X 4G!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Exception at 000000010004492C: EAccessViolation:
Access violation
Error pls help 6x MSI RX 480 GAMING X 4G!!!
i had this error on my 6x rx 470 rig. I used -p 1 instead of -p 0 and voila. Hope it helps !
can you tell me the difference please?
Type "PascalCoinMiner -h" in cmd and look your number of platform.
January 27, 2017, 09:50:08 AM
What happened to using the 1.4 cuda miner anyone having any luck with it?
January 27, 2017, 09:49:26 AM
Speeds are pretty good with miner 0.1 on the RX 470 4GB.
However this damn miner crashes alot and requires a full reboot to re-run. Getting really annoying to the point of just wanting to go back to ETH mining.
With 0.2 it never crashed, but didn't find a single block.
However this damn miner crashes alot and requires a full reboot to re-run. Getting really annoying to the point of just wanting to go back to ETH mining.
With 0.2 it never crashed, but didn't find a single block.
How are you getting 420h/s on a 470 4gb? i'm getting about 280h/s
January 27, 2017, 09:48:32 AM
help January 27, 2017, 09:46:08 AM
How do I withdraw my payment?
January 27, 2017, 09:45:52 AM
Speeds are pretty good with miner 0.1 on the RX 470 4GB.
However this damn miner crashes alot and requires a full reboot to re-run. Getting really annoying to the point of just wanting to go back to ETH mining.
With 0.2 it never crashed, but didn't find a single block.
However this damn miner crashes alot and requires a full reboot to re-run. Getting really annoying to the point of just wanting to go back to ETH mining.
With 0.2 it never crashed, but didn't find a single block.
January 27, 2017, 09:41:29 AM
So let's start a Twitter campaign for asking Poloniex to offer PascalCoin account trading (PASA).
From now on, I will offer one account for every Tweet requesting PASA trading on Poloniex. Your tweet must contains the following: #PascalCoin @poloniex $PASA
Once done, PM me your tweet and your PascalCoin public key!
From now on, I will offer one account for every Tweet requesting PASA trading on Poloniex. Your tweet must contains the following: #PascalCoin @poloniex $PASA
Once done, PM me your tweet and your PascalCoin public key!
Ok, so let me be clear about this because I already got a few irrelevant PMs.
You won't receive any PASC from me, only 1 PASA.
So, I need your Public key:
to get your public key,
1) go to Menu>Project>Private keys (shortcut CTRL+P)
2) click on "New for miner ..." to enable the public key button
3) click on the button Export public key
4) the public key is pasted in your clipboard and you can then PM it to me.
I had finish with @Mmo4me_2016
my public key: 3Ghhbot2tE7FohrkMBZVr6hj9dHzZQVjnd7Nsy9NVKpgCNiM1i9fcgDkGAjkmKoqiSgARf7dvXKbpL9 uyBFsqKzmFDEheBRU1SckCv
Thanks
January 27, 2017, 09:38:52 AM
I optimized the opencl miner a little bit. (2% - 5% expected) This is tested on an r9 280x
If anyone interested, just replace the pascalsha.cl file in the miner directory
https://ufile.io/0f267
btc: 19RgeAw8PAU7WoP6zrWGiYuD78KmUhDmRx
eth: 0x585ae8cf889282751b3c38c38a9c833d96d0dc59
happy mining
If anyone interested, just replace the pascalsha.cl file in the miner directory
https://ufile.io/0f267
btc: 19RgeAw8PAU7WoP6zrWGiYuD78KmUhDmRx
eth: 0x585ae8cf889282751b3c38c38a9c833d96d0dc59
happy mining
Tried but no effect. still 438mH/s on tahiti. What hashrate you have?
I got 410 with stock one. 429 with modded one. Not that much improvement, but it helps a little. Too bad it's not working for you it seems
Also it showed more errors on the miner if you ran it on test. Anyway thanks.
January 27, 2017, 09:38:24 AM
!!!!!!!!!!!!!!!!!!!!!HHEEEEEEEELP!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Exception at 000000010004492C: EAccessViolation:
Access violation
Error pls help 6x MSI RX 480 GAMING X 4G!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Exception at 000000010004492C: EAccessViolation:
Access violation
Error pls help 6x MSI RX 480 GAMING X 4G!!!
i had this error on my 6x rx 470 rig. I used -p 1 instead of -p 0 and voila. Hope it helps !
can you tell me the difference please?
January 27, 2017, 09:37:45 AM
!!!!!!!!!!!!!!!!!!!!!HHEEEEEEEELP!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Exception at 000000010004492C: EAccessViolation:
Access violation
Error pls help 6x MSI RX 480 GAMING X 4G!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Exception at 000000010004492C: EAccessViolation:
Access violation
Error pls help 6x MSI RX 480 GAMING X 4G!!!
i had this error on my 6x rx 470 rig. I used -p 1 instead of -p 0 and voila. Hope it helps !
January 27, 2017, 09:36:03 AM
!!!!!!!!!!!!!!!!!!!!!HHEEEEEEEELP!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Exception at 000000010004492C: EAccessViolation:
Access violation
Error pls help 6x MSI RX 480 GAMING X 4G!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Exception at 000000010004492C: EAccessViolation:
Access violation
Error pls help 6x MSI RX 480 GAMING X 4G!!!
i had this error on my 6x rx 470 rig. I used -p 1 instead of -p 0 and voila. Hope it helps !
January 27, 2017, 09:35:49 AM
Miners using private miner for pascal ?
WTB private miner for blocks - for pascal only
WTB private miner for blocks - for pascal only
You can try the one I posted, it might help a few %
January 27, 2017, 09:33:37 AM
I optimized the opencl miner a little bit. (2% - 5% expected) This is tested on an r9 280x
If anyone interested, just replace the pascalsha.cl file in the miner directory
https://ufile.io/0f267
btc: 19RgeAw8PAU7WoP6zrWGiYuD78KmUhDmRx
eth: 0x585ae8cf889282751b3c38c38a9c833d96d0dc59
happy mining
If anyone interested, just replace the pascalsha.cl file in the miner directory
https://ufile.io/0f267
btc: 19RgeAw8PAU7WoP6zrWGiYuD78KmUhDmRx
eth: 0x585ae8cf889282751b3c38c38a9c833d96d0dc59
happy mining
Tried but no effect. still 438mH/s on tahiti. What hashrate you have?
I got 410 with stock one. 429 with modded one. Not that much improvement, but it helps a little. Too bad it's not working for you it seems
January 27, 2017, 09:30:56 AM
This Mining frustration causing the price to drop.
@PascalCoin
lol OH IS THAT IT?!?
It is called insider whale coin who is pump and dump this crap that is impossible and useless to use. Glad can just buy/sell fast on polo, otherwise not touching mining or for long!
whale starts moving after checking people's movements.
Who started Bitcoin (people), and who prepared the All Time Highs (whale/s)?
For sure you are not Technical oriented ...
January 27, 2017, 09:30:23 AM
This Mining frustration causing the price to drop.
@PascalCoin
lol OH IS THAT IT?!?
It is called insider whale coin who is pump and dump this crap that is impossible and useless to use. Glad can just buy/sell fast on polo, otherwise not touching mining or for long!
Wouldn't it have been easier to just generate wallet address like most coins do, rather than having to mine an entire block to get an account.
That would also mean when the difficulty increases it would take a while to get account #s to a large population.
January 27, 2017, 09:27:16 AM
!!!!!!!!!!!!!!!!!!!!!HHEEEEEEEELP!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Exception at 000000010004492C: EAccessViolation:
Access violation
Error pls help 6x MSI RX 480 GAMING X 4G!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Exception at 000000010004492C: EAccessViolation:
Access violation
Error pls help 6x MSI RX 480 GAMING X 4G!!!
As I said previous, it's help to me move folder with miner to root disk C.
Got the same exception on Win7 64 and Nvidia GeForce 310M.
Nor moving folder to the root of drive,
nor firewall setting changes,
nor compatibility mode execution,
nor run in privileged mode (as administrator),
nor folder/path regional symbols eliminations,
nor Nvidia drivers updates does,
nor antivirus disabling,
does not help
all versions of CUDA miners crashed with ERROR ALLOCATION ...
January 27, 2017, 09:24:43 AM
help miningg cpu?
Jump to: