Topic: [ANN] [PASC] PascalCoin, true deletable blockchain - V3 Hardfork on block 210000 - page 259. (Read 990783 times)

Tested -t 15 for 10min:

RIG withi 5 cards AMD:

https://postimg.org/image/fxsl2s1zd/


RX 390 solo:

https://postimg.org/image/7zrbyticd/


Really does not look like it's scaling well with more than 1 GPU.

We want Polo to list PASA soon. RT Please. Thanks

https://twitter.com/coinstester/status/824948223622074368

Also, request bittrex to list PASC and PASA. RT.

https://twitter.com/coinstester/status/824948373711003648

Another issue is why it keeps producing invalid timestamps


27/01/2017 04:43:46.473 TID:0000214C [Error] Invalid new block 56978: Invalid timestamp (New timestamp:1485517426 last timestamp (56977):1485517436)
27/01/2017 04:43:46.475 TID:0000214C [Error] Sending Error JSON RPC id (19) : Error: Invalid timestamp (New timestamp:1485517426 last timestamp (56977):1485517436) payload:adaseb600/1--- timestamp:1485517426 nonce:2857336391

Yeah even i was quite impressed about the way pascal is moving, very huge volume potential being maintained in poloniex. May be i will also wait for some more days because many people are expecting that there will be big bounce in the price.

Wait for it to mature, before you can send.
State of the coin must be color green.

Hi Guys;

I don't know why but when I start "Pascal Coin Wallet" it is crashing with "Invalid file type" message. Following is "An error occurred during initialization. application cannot continue. Access violation at address 0055a640 in module 'PascalCoinWallet.exe' Read of address 0000004C Application will close"





Is there any chance to know why? My Os is Win7 Por x64

Kind regards

This is the very very smart reply I got once I asked for help on how to start mine.
I really would like to read in the thread where this is explained, please someone could point me where it is within the 177 pages of this thread

well said.

Mining pool the solution to our problems

Maybe we also should see if there are multiple same nonces submitted at once? That would mean it does same job more that once

FIND OUT IF YOUR GPUS ARE ACTUALLY MINING BEFORE YOU CONTINUE MINING



Run "pascalcoinminer" with -t 15 and observe for a few minutes the results

For example

MINING STATUS:
04:39:38 Miner:"adaseb600/0---" at 513.35 MH/s - Rounds: 236.39 G Found: 2
04:39:38 Miner:"adaseb600/1---" at 512.13 MH/s - Rounds: 236.27 G Found: 7
04:39:38 Miner:"adaseb600/2---" at 512.13 MH/s - Rounds: 236.21 G Found: 8 3 ERRORS


The last GPU has almost 50% hardware errors for every block it finds.


You can verify this with the PascalCoin Wallet. Go to OPTIONS and enable "SHOW LOG". Now looking at the log it says "Invalid Operations Hash", this is not normal

These errors might be due to the buggy Pascalcoinminer 0.2 software or due to modified memory straps on the RX 470/480 that we did to mine ETH.

The thing adaseb said about v0.2 is not that "it's not working", but that it's supposedly working about three times less effective than it should.
May be some wrong internal cyclesize for many GPUs or something?..

Congratulations. You need to wait ~8 hours.

It works fine using -t too.
-t is only if you want to be sure you are properly mining (not wasting time). You can use it.

This is what I Get with -t 15.....

MINING STATUS:
11:33:32 Miner:"NvidiaNVNvidiaNV------------------" at 436.02 MH/s - Rounds: 75.78 G Found: 4

MY VALID BLOCKS FOUND: 4 Working time: 0d 00:03:00
11:32:22 Block:56975 NOnce:2331609238 Timestamp:1485516742 Miner:NvidiaNVNvidiaNV------------------                              
LOGS:
11:30:59 Info FOUND VALID NONCE!!! Timestamp:1485516659 Nonce:1045411143
11:30:59 Info Received response method:miner-submit JSON:{"result":{},"error":"Error: Proof of work is higher than target payload:
11:31:06 Info FOUND VALID NONCE!!! Timestamp:1485516667 Nonce:1607695376
11:31:06 Info Received response method:miner-submit JSON:{"result":{},"error":"Error: Proof of work is higher than target payload:
11:31:18 Update New miner values. Block 56975 Payload NvidiaNV
11:31:18 Info Updated MinerValuesForWork: Payload:NvidiaNVNvidiaNV------------------
11:32:02 Info FOUND VALID NONCE!!! Timestamp:1485516722 Nonce:1366376601
11:32:02 Info Received response method:miner-submit JSON:{"result":{},"error":"Error: Proof of work is higher than target payload:
11:32:22 Info FOUND VALID NONCE!!! Timestamp:1485516742 Nonce:2331609238
11:32:22 Info Received response method:miner-submit JSON:{"result":{},"error":"Error: Proof of work is higher than target payload:

[/quote]

That's ok, you're mining properly and "perhaps" you will find a block. Good luck!
[/quote]

Thank you) I understand you correctly , I remove the -t 10 option , start up again the miner to continue mining?

I found a block and I am trying to send some coins to POLONIEX.
I wrote the Destination account, and the payload data, everything seems OK but I get this message:

so -t is only to verify, not to keep it all the time right ?

That's ok, you're mining properly and "perhaps" you will find a block. Good luck!

And I'm with UBUNTU 16.10