Topic: [ANN] Prospector - Multi-Coin GPU+CPU cryptocurrency miner - page 13. (Read 32105 times)

Added windows binaries for 0.0.6

Old GPUs, current version does not work on 2xx hardware. I am working on complete kernel rewrite that might help.

The miner not working on my R9 280x x3 cards only rejected and driver crashed.
Miner intialized on 1 card and 2 other card is disable then in a few min device(0:1) initialized...then driver crashed

After optimization and debugging, you need to start working on a dual mode, like Claymore. The beginning is good. I wish the author luck. I will test whenever possible.

Will have to wait for your Windows build before testing then.

Whats your undervolting specs?

Works fine,
with RX580 8GB 19 M/h with undervolting...
SGMiner only 15-16 M/h with undervolting
Many thanks!

Core only, not so much mem opperations in comparison.

Thank you so much. It is working now and getting the following. Not sure why showing no shares accepted though.

===================
12:34:24 - INFO   prospector 0.0.5-ALPHA starting
12:34:24 - INFO   Configuration successfuly loaded from config.json
12:34:26 - INFO   OpenCL initialized
12:34:26 - INFO   Not launching CPU miner
12:34:26 - INFO    Miner starting on gpu (0:0) - Pitcairn
12:34:26 - INFO   Device (0:1) disabled
12:34:26 - INFO   Signatum: Subscribed, waiting for jobs
12:34:26 - INFO   Signatum: Miner received subscription response
12:34:26 - INFO   Signatum: Authorized  by the pool
12:34:26 - INFO   Signatum: Miner changed difficulty
12:34:26 - INFO   Signatum: Miner changed difficulty
12:34:38 - INFO   Signatum: Miner received new job
12:34:48 - INFO   Signatum: Shares   0 accepted / 0 total
12:34:48 - INFO   Signatum: Devices (0:0) - 0.00Hash/s
12:34:48 - INFO   Signatum: Average 0.00, 0.00, 0.00 Hash/s (30s, 5m, 30m)
12:35:02 - INFO   (0:0) Initialized
12:35:10 - INFO   Signatum: Shares   0 accepted / 0 total
12:35:10 - INFO   Signatum: Devices (0:0) - 3.09MHash/s
12:35:10 - INFO   Signatum: Average 1.03M, 772.53k, 772.53k Hash/s (30s, 5m, 30m)
12:35:20 - INFO   Signatum: Miner received new job
12:35:22 - INFO   Signatum: Miner received new job
12:35:33 - INFO   Signatum: Shares   0 accepted / 0 total
12:35:33 - INFO   Signatum: Devices (0:0) - 3.09MHash/s
12:35:33 - INFO   Signatum: Average 3.09M, 1.54M, 1.54M Hash/s (30s, 5m, 30m)
12:35:41 - INFO   Signatum: Miner received new job
12:35:55 - INFO   Signatum: Shares   0 accepted / 0 total
12:35:55 - INFO   Signatum: Devices (0:0) - 3.09MHash/s
12:35:55 - INFO   Signatum: Average 3.09M, 1.93M, 1.93M Hash/s (30s, 5m, 30m)
12:36:17 - INFO   Signatum: Shares   0 accepted / 0 total
12:36:17 - INFO   Signatum: Devices (0:0) - 3.10MHash/s
12:36:17 - INFO   Signatum: Average 3.10M, 2.17M, 2.17M Hash/s (30s, 5m, 30m)
12:36:23 - INFO   Signatum: Miner received new job
12:36:38 - INFO   Signatum: Miner received new job
12:36:39 - INFO   Signatum: Shares   0 accepted / 0 total
12:36:39 - INFO   Signatum: Devices (0:0) - 3.09MHash/s
12:36:39 - INFO   Signatum: Average 3.15M, 2.33M, 2.33M Hash/s (30s, 5m, 30m)
12:37:02 - INFO   Signatum: Shares   0 accepted / 0 total
12:37:02 - INFO   Signatum: Devices (0:0) - 3.13MHash/s
12:37:02 - INFO   Signatum: Average 3.11M, 2.45M, 2.45M Hash/s (30s, 5m, 30m)
12:37:05 - INFO   Signatum: Miner received new job
12:37:24 - INFO   Signatum: Shares   0 accepted / 0 total
12:37:24 - INFO   Signatum: Devices (0:0) - 3.09MHash/s
12:37:24 - INFO   Signatum: Average 3.10M, 2.53M, 2.53M Hash/s (30s, 5m, 30m)
12:37:26 - INFO   Signatum: Miner received new job

Any reason why my shares aren't being accepcted? It says 0 accepted / 33 total.

I got about an 16 MH/s increase with 6 RX 570 Sapphire Pulse 4 Gb, which is pretty much like having a 7th gpu running along.
Went from 16,5-17 MH/s on SGminer to over 19 Mh/s.

Definitely makes up for the 1% devfee. Thank you so much and please keep optimizing this miner! Finnally we AMD miners get some upgrade to mine SIGT.

Thanks again!

I tested it on my GİGABYTE RX 560 gb 8.7-9 mh mine

Sigt is not supported on CPU, and miner recognizes this as an error. I will change this behavior in next release so that miner will not close if you insert invalid info, it will simpy inform you and don't mine.

For now set "cpu-coin" to "xmr" and "cpu" entry "enabled" to false

I didn't really change the default config apart from adding the pool address ...etc . As long as you set gpu-coin to sigt, it does really matter if the other coins are there. You need to set cpu to disable
"cpu": {
    "enabled": false,

I am using this config.json but it is not running. I have AMD Sapphire 270x R7. What am I doing wrong? Thanks in advance.

{
  "pools": {
    "sigt": {
      "url": "stratum+tcp://skunk.mine.zpool.ca:8433/",
      "username": "B7T4vpVCdKsaN5gfxHKUm3u4HXYALm6LSs",
      "password": "c=SIGT"
    }
  },
  "gpu-coin": "sigt",
  "cpu-coin": "sigt",
  "gpus": {
    "(0:0)": {
      "enabled": true,
      "label": "Pitcairn"
    }
  },
  "cpu": {
    "enabled": true,
    "label": "CPU"
  }
}

Both Linux and Windows versions are statically linked binaries.

Is this the complete file or there are more? I only got Prospector.exe in the download. Thanks

There is an issue with work stalls on gpus with 19 MH/s + , I have fixed this issue and will publish a new build soon.

I tested it on my 6 x RX580 8Gb and hash rate looks higher than using Sgminer.

Using stock 1366/2000 with a little bit of undervolting I am getting 20.2-20.4Mh

Same settings on Sgminer with intensity 20 I got 18.75Mh.


1) CPU seems to be less occupied with your miner and I do see some GPU on 0% load every now and then

2) Power usage is lower then Sgminer and maybe that is reflected by the idling on some GPU sometimes. 490W with Sgminer and 453W with Prospector.

3) GPU are a lot cooling, they are mostly 60 degrees or below,  and with SGminer they are mostly in the early 60s. I got have all my fans running 60% and my room temperature is around 21 degrees.


So from just looking at hash rate it looks good but on suprnova portal my hash rate on SGminer is quite stable at around 100-110Mh but with Prospector it fluctuate a lot. It can be 120Mh then drop to 60Mh or sometimes 50Mh.

I think there are rooms for improvement definitely but it looks promising so far.

8.85MH/s on RX560 compared to 8.3 on sgminer...when
you take away 2% fee, about 5% faster...hope theres still
more room for improvement...and buy some AMD cards soon,
as you have more room to colelct your fees there, because
ccminer for Nvidias seem to be highly optimized already