[ANN] QQCoin- Scrypt Jane, ASIC Resistant, N-Factor, Multipool Resistant - page 133.

lemfuture

hero member

Activity: 686

Merit: 500

Quote from: coinpool_de on December 29, 2013, 01:16:39 AM

okay. My Pool is running now.
Hope someone will join and test ist.

http://qqc.coinpool.de

Stratum Port 1008
http://qqc.coinpool.de:1008

Please join to test it and to get a valid Block.

Thanks.

how to join this? idk what exactly are the steps and how exactly to type where

Bradlu

newbie

Activity: 42

Merit: 0

Quote from: coinpool_de on December 29, 2013, 01:31:57 AM

okay. My Pool is running now.
WOW 15 Users joined!!! Thanks a lot.

http://qqc.coinpool.de

Stratum Port 1008
http://qqc.coinpool.de:1008

In your getting started you give an example using cgminer. Not sure that works. I looked at a yacoin pool and their example config is: ybcminer --scrypt -o http://yac.coinmine.pl:9088 -u WorkerName.1 -p WorkerPassword

Treggar

full member

Activity: 196

Merit: 100

Yeah the miner is reporting really odd hashrates. Earlier today it was saying I was getting 1.6Mh/s ... now 250Kh/s

cointoss

member

Activity: 92

Merit: 10

Quote from: efx on December 29, 2013, 01:26:21 AM

Quote from: cointoss on December 29, 2013, 12:53:39 AM

Quote from: efx on December 29, 2013, 12:10:19 AM

Up to ~5.6 at i20.

^ Does GPU-z show your clocks holding steady? Powertune might be kicking in.

Clocks are steady, it shows 99% GPU load in GPU-Z, I'm finding valid blocks, but they are only running at 2.8Mh/s. :/

Can you post your config? (and anyone else who can get 5Mhz with QQ on a 7950) Are you using a file or command line arguments?

Thanks.

My config is nothing more than the solo-mine batch with scan and expiry at 1. YBCminer should be setting the other parameters to the same values automatically for all of us with 7950s.

It's possible that the miner is setting less than ideal values for threads (-g iirc) or thread concurrency in your specific case due to mixed up device IDs or something.

Oddly, mine seems to be going slower suddenly but perhaps I have a tab open using excessive GPu resources or something...Going to reboot and see what's up.

I went back to the vanilla solo-mine.bat but it didn't improve my hashes, unfortunately. Mine was at 2.8mh/s while you guys were getting 5mh/s and now it's at 2.45mh/s while the others have fallen to around 3.3mh/s.

Is Scrypt Jane more system RAM intensive than regular Scrypt? I have 4gb for 3x7950. They run beautifully on plain Scrypt.

Those of you who reached 5mh/s, how much system RAM are you running and what GPU driver?

mtbitcoin

legendary

Activity: 876

Merit: 1000

Etherscan.io

QQCoin has a nice ring to it and sounds like something that might appeal to th Chinese seeing that QQ is a popular messenging platform in china

Oh well...

coingeter

jr. member

Activity: 56

Merit: 10

Quote from: cqcy85 on December 29, 2013, 01:36:50 AM

Quote from: coinpool_de on December 29, 2013, 01:31:57 AM

okay. My Pool is running now.
WOW 15 Users joined!!! Thanks a lot.

http://qqc.coinpool.de

Stratum Port 1008
http://qqc.coinpool.de:1008

someone told me it is scrypt-jane and can not be mined by cgminer, is it correct?

I think so

peterlustig

sr. member

Activity: 812

Merit: 250

The Fourth Generation of Blockchain in DeFi

I think the nFactor change happened at 20000 blocks btw (at 20089 right now), so every 20000 blocks I guess.

cqcy85

member

Activity: 66

Merit: 10

Quote from: coinpool_de on December 29, 2013, 01:31:57 AM

okay. My Pool is running now.
WOW 15 Users joined!!! Thanks a lot.

http://qqc.coinpool.de

Stratum Port 1008
http://qqc.coinpool.de:1008

someone told me it is scrypt-jane and can not be mined by cgminer, is it correct?

efx

sr. member

Activity: 378

Merit: 250

Quote from: peterlustig on December 29, 2013, 01:31:24 AM

I think there was an nFactor change, my hashrate fell from 5 to 3.3MH/s.

Ah yes, that occurred to me right as I hit restart, heh. Also right around 3.3 now

^ normal for scrypt-'jane' as we have seen it used so far Wink

chip99

full member

Activity: 196

Merit: 100

Quote from: efx on December 29, 2013, 01:26:21 AM

Quote from: cointoss on December 29, 2013, 12:53:39 AM

Quote from: efx on December 29, 2013, 12:10:19 AM

Up to ~5.6 at i20.

^ Does GPU-z show your clocks holding steady? Powertune might be kicking in.

Clocks are steady, it shows 99% GPU load in GPU-Z, I'm finding valid blocks, but they are only running at 2.8Mh/s. :/

Can you post your config? (and anyone else who can get 5Mhz with QQ on a 7950) Are you using a file or command line arguments?

Thanks.

My config is nothing more than the solo-mine batch with scan and expiry at 1. YBCminer should be setting the other parameters to the same values automatically for all of us with 7950s.

It's possible that the miner is setting less than ideal values for threads (-g iirc) or thread concurrency in your specific case due to mixed up device IDs or something.

Oddly, mine seems to be going slower suddenly but perhaps I have a tab open using excessive GPu resources or something...Going to reboot and see what's up.

its normal that the speed is going down. because the difficulty is increasing.

coinpool_de

sr. member

Activity: 504

Merit: 250

okay. My Pool is running now.
WOW 15 Users joined!!! Thanks a lot.

http://qqc.coinpool.de

Stratum Port 1008
http://qqc.coinpool.de:1008

peterlustig

sr. member

Activity: 812

Merit: 250

The Fourth Generation of Blockchain in DeFi

I think there was an nFactor change, my hashrate fell from 5 to 3.3MH/s.

phinino

jr. member

Activity: 56

Merit: 10

Quote from: coinpool_de on December 29, 2013, 01:16:39 AM

okay. My Pool is running now.
Hope someone will join and test ist.

http://qqc.coinpool.de

Stratum Port 1008
http://qqc.coinpool.de:1008

Please join to test it and to get a valid Block.

Thanks.

Good job!
You may need to post an new topic post to ANN.

efx

sr. member

Activity: 378

Merit: 250

Quote from: coinpool_de on December 29, 2013, 01:24:40 AM

Quote from: cqcy85 on December 29, 2013, 01:22:13 AM

the pool request us to use cgminer?

i am running it with cgminer

YBCminer (or your own version) cgminer, right?

efx

sr. member

Activity: 378

Merit: 250

Quote from: cointoss on December 29, 2013, 12:53:39 AM

Quote from: efx on December 29, 2013, 12:10:19 AM

Up to ~5.6 at i20.

^ Does GPU-z show your clocks holding steady? Powertune might be kicking in.

Clocks are steady, it shows 99% GPU load in GPU-Z, I'm finding valid blocks, but they are only running at 2.8Mh/s. :/

Can you post your config? (and anyone else who can get 5Mhz with QQ on a 7950) Are you using a file or command line arguments?

Thanks.

My config is nothing more than the solo-mine batch with scan and expiry at 1. YBCminer should be setting the other parameters to the same values automatically for all of us with 7950s.

It's possible that the miner is setting less than ideal values for threads (-g iirc) or thread concurrency in your specific case due to mixed up device IDs or something.

Oddly, mine seems to be going slower suddenly but perhaps I have a tab open using excessive GPu resources or something...Going to reboot and see what's up.

coinpool_de

sr. member

Activity: 504

Merit: 250

Quote from: cqcy85 on December 29, 2013, 01:22:13 AM

the pool request us to use cgminer?

i am running it with cgminer

chip99

full member

Activity: 196

Merit: 100

QQcoin will get very popular in china. i advise you to hold.

phinino

jr. member

Activity: 56

Merit: 10

I'm selling 10K QQs as well.

~~Each 1k QQCs for 0.1 BTC.~~
Each 1k QQCs for 0.05 BTC. (price updated)

Pm me or read my post here first:

http://qqco.in/forum/index.php?topic=6.msg21#msg21

cqcy85

member

Activity: 66

Merit: 10

the pool request us to use cgminer?

coinpool_de

sr. member

Activity: 504

Merit: 250

okay. My Pool is running now.
Hope someone will join and test ist.

http://qqc.coinpool.de

Stratum Port 1008
http://qqc.coinpool.de:1008

Please join to test it and to get a valid Block.

Thanks.

Topic: [ANN] QQCoin- Scrypt Jane, ASIC Resistant, N-Factor, Multipool Resistant - page 133. (Read 187348 times)