Topic: [ANN] Sexcoin - coin for adult industry - page 2. (Read 111339 times)

Yes. I can confirm. I mined my first solo ever today. I have not more hash-power than kelsey. Lucky Day 

You can solo-mine using connect or addnode.



listen=1 option (the default) tells Sexcoin-qt to ACCEPT other client network connections in general. It allows people to connect to your client without getting the address from another node on the network, using -connect will negate listen=1.

When mining using connect, your blocks will be confirmed first by the clients you are directly connected to, which will in turn relay the block information to all the nodes THEY are connected to (and so-on and so-on).

All that being said, I have successfully mined, sent and received coins safely with the block chain being reported by my client as out-of-sync.

Also, note above that the P2Pool is working again

Hope that helps!

you're lucky anyone say over 500 kh/s joins the pool and I can't even get more then the odd share in, so no payouts, the idea behind pool mining is to help those who can't solo mine join forces.

I mine with 25kh/s and get about 3.4 SXC per payout

By the way, you should add +0.00002382 to your username (SXC address) to adjust the share difficulty for a lower hash rate. Should not make any difference regarding the payout but gives you a constant share rate.

I'm not understanding the whole 'connect-thing': If I want to mine solo, do I need addnode or is solo-mining with a "Sexcoin-qt -connect" possible? If my sexcoin.conf contains listen=1, others who have "Sexcoin-qt -connect" can't connect to my blockchain. So how can I share my own share, if I have found a new block with solo-mining and my sexcoind in connect-mode?

So whats the difference between "addnode" and "connect"?
-"addnode" tells the client to add this peer as a node BUT ALSO try to add them dynamically through the network.
-"connect" option tells the client to ONLY connect to these peers and these peers ONLY.

"-listen   Accept connections from outside (default: 1 if no -proxy or -connect)"

my little 20kh/s would never get a share in there atm

Pool : http://66.172.10.55:19337/static/

it's working properly again
You are welcome to mine

I have a workaround for those that do not like the "Synchronizing with network..." issue to be displayed.

First, this is not an attack or malicious act by anyone but more of an oversight when the coin was created. Your wallet is safe and your coins aren't going anywhere because of issue.

Having that in mind, here is at least one way of fixing it until the coin itself (meaning all clients on the network and the block chain) can be fixed which is something we will be working on very soon.

In your sexcoin.conf file, instead of using the "addnode" keyword, change that to "connect". Your config file should look something this ....

connect=46.39.246.24:9560
connect=68.52.140.186:9560
connect=84.253.217.35:9560
connect=67.191.160.195:9560
connect=223.27.19.38:9560
connect=207.29.218.6:9560

So whats the difference between "addnode" and "connect"?
Simply, "addnode" tells the client to add this peer as a node but also try to add them dynamically through the network. The "connect" option tells the client to ONLY connect to these peers and these peers ONLY.

So if you make these changes, please note that at least ONE of these in the list must be up and accepting connections, otherwise you will not be able to connect to the network. 2 of the nodes listed above belong to me and I will try and keep them up as much as possible. One is my personal workstation which gets rebooted every now and again and the other is a new server I added the client to last night, so it should be up most of the time.

A few of us are working on a new client that will be announced very shortly, so hang in there everyone. We appreciate everyone's patience. Feel free to PM me if you have any problems with the above config.

Yes I can confirm.  Sorry, I'm answering lately. Should I send them back for compatibility test?

Since the old client crashes more often then a stock car it might be a good idea to release the new client ASAP.

ok so thats where that 500 came from.....so yes recieved.

Not yet ... it's still in beta
We will release the new version as soon as we are sure that everything works fine

1 keep your wallet.dat in a safe place
2 delete sexcoin forder from Roaming

3 add this in your sexcoin.conf file
4 addnode=46.39.246.24:9560
5 addnode=68.52.140.186:9560
6 addnode=84.253.217.35:9560
7 addnode=67.191.160.195:9560
8 addnode=223.27.19.38:9560
9 If you have any other nodes delete them

10 run again the sexcoin wallet
11 exit wallet
12 replace the wallet.dat with the one that you put in safe place
13 run again the sexcoin wallet