Topic: [ANN] Sfards:SF100, the first 28nm Dual-Mode Miner is accepting pre-order now - page 15. (Read 129760 times)
August 15, 2015, 07:16:20 PM
WTF! seems their interface needs some work. Looks like your sharing (for a short time) other users hashes. Or Ghash.io doesn't know what to make of this new hardware.
August 15, 2015, 05:49:02 PM
Screen grab to show what I am talking about
August 15, 2015, 04:59:25 PM
One day at 5.49Th/s? On a single unit? How's that possible?
something weird happen i had a spike to 30TH out of no where
That's not a spike - that's a whole day, 24 hours. According to that screen shot, your 1.7Th miner was churning out 5.49Th for 24 hours - that's impossible.
he had someone point ~30th to his address! it was pointed for so much time that it gave the average per day at 5.49Th. is that hard???
Well....yes - because that's his miner username, not a payment address. If you are asking me if ghash or someone else accidently entered exactly the same miner name as his, after presumably entering exactly the same password/2fa in order to do so, then accidentally pointed 30Th at it for however long - then yes, that's pretty hard.
I don't use ghash, for obvious reasons, so I'm not really familiar with their (lack of) security measures though.
If I post my 24hr graph ghash had there web server crash at some point I was unable to login when I did it showed my average hash rate of 30th which is wrong all that work was on that one specific worker although my block payout for that time Fran was higher then usual so it's all bizarre to me not possible for someone to accidental use exactly the same worker so it must have had to do with the pool issues in the last 24 hrs now it's normal and stable
August 15, 2015, 04:38:29 PM
One day at 5.49Th/s? On a single unit? How's that possible?
something weird happen i had a spike to 30TH out of no where
That's not a spike - that's a whole day, 24 hours. According to that screen shot, your 1.7Th miner was churning out 5.49Th for 24 hours - that's impossible.
he had someone point ~30th to his address! it was pointed for so much time that it gave the average per day at 5.49Th. is that hard???
Well....yes - because that's his miner username, not a payment address. If you are asking me if ghash or someone else accidently entered exactly the same miner name as his, after presumably entering exactly the same password/2fa in order to do so, then accidentally pointed 30Th at it for however long - then yes, that's pretty hard.
I don't use ghash, for obvious reasons, so I'm not really familiar with their (lack of) security measures though.
August 15, 2015, 04:00:31 PM
One day at 5.49Th/s? On a single unit? How's that possible?
something weird happen i had a spike to 30TH out of no where
That's not a spike - that's a whole day, 24 hours. According to that screen shot, your 1.7Th miner was churning out 5.49Th for 24 hours - that's impossible.
he had someone point ~30th to his address! it was pointed for so much time that it gave the average per day at 5.49Th. is that hard???
August 15, 2015, 03:47:17 PM
One day at 5.49Th/s? On a single unit? How's that possible?
something weird happen i had a spike to 30TH out of no where
That's not a spike - that's a whole day, 24 hours. According to that screen shot, your 1.7Th miner was churning out 5.49Th for 24 hours - that's impossible.
August 15, 2015, 03:42:41 PM
Screen shot of the web interface its all managed from the cloud using there website cant figure out how to login to local machine and OC yet
saving space
saving space
Are you saying there is not a local interface to manage miner? It is all done online?
I hope it is not all done online without local. That would be different to say the least.
if you go to login to the device's local IP it has a web server but I haven't figured out how to login the password I setup for the website wasn't working for the local interface I have to try and play with that a little
Ahh ok thanks! If it was only online that would scare me as if service goes down then miner might be a brick.
Hopefully they will release username/pass so we can see local.
getting it to "bind" as they call it to your account is a little strange you need to login to there website then from the browser it scans your LAN and reports back any miners it finds. You then bind it to your account it reboots then you can manage and configure it from that web interface. It is definitely not intuitive at all it took me over an hour to get the thing working and I have had hands on experience with pretty much every type of mining hardware produced in the last 2 years, it kind of reminds me of the original ZenCloud Pi Devices before GAW turned that to shit
August 15, 2015, 03:31:16 PM
Screen shot of the web interface its all managed from the cloud using there website cant figure out how to login to local machine and OC yet
saving space
saving space
Are you saying there is not a local interface to manage miner? It is all done online?
I hope it is not all done online without local. That would be different to say the least.
if you go to login to the device's local IP it has a web server but I haven't figured out how to login the password I setup for the website wasn't working for the local interface I have to try and play with that a little
Ahh ok thanks! If it was only online that would scare me as if service goes down then miner might be a brick.
Hopefully they will release username/pass so we can see local.
August 15, 2015, 03:30:02 PM
Noise level of the miner is Lower than an S5 but higher than an S3 id say its in between only has 1 large fan but it has run solid for 5 days now no issues no rebooting
August 15, 2015, 03:28:56 PM
Screen shot of the web interface its all managed from the cloud using there website cant figure out how to login to local machine and OC yet
saving space
saving space
Are you saying there is not a local interface to manage miner? It is all done online?
I hope it is not all done online without local. That would be different to say the least.
if you go to login to the device's local IP it has a web server but I haven't figured out how to login the password I setup for the website wasn't working for the local interface I have to try and play with that a little
August 15, 2015, 03:27:47 PM
One day at 5.49Th/s? On a single unit? How's that possible?
something weird happen i had a spike to 30TH out of no where
August 15, 2015, 03:23:17 PM
Screen shot of the web interface its all managed from the cloud using there website cant figure out how to login to local machine and OC yet
saving space
saving space
Are you saying there is not a local interface to manage miner? It is all done online?
I hope it is not all done online without local. That would be different to say the least.
August 15, 2015, 01:54:40 PM
One day at 5.49Th/s? On a single unit? How's that possible?
August 15, 2015, 01:20:35 PM
Screen shot of the web interface its all managed from the cloud using there website cant figure out how to login to local machine and OC yet
August 15, 2015, 01:08:46 PM
My SFARDS unit is working just fine at the speeds advertised. The software interface is a little confusing to setup, and I haven't figured out how to overclock but I am getting 1.7TH SHA256 and 50MH Scrypt running on a 1200 Watt Evga Platinum PSU and power draw is about what I expected. I can post some screen shots of pool stats or the web interface for the controller for anyone that is interested
please post lots of shots and please show power usage if you can.
Screen shots from Ghash of my hashing speed
August 15, 2015, 12:57:54 PM
My SFARDS unit is working just fine at the speeds advertised. The software interface is a little confusing to setup, and I haven't figured out how to overclock but I am getting 1.7TH SHA256 and 50MH Scrypt running on a 1200 Watt Evga Platinum PSU and power draw is about what I expected. I can post some screen shots of pool stats or the web interface for the controller for anyone that is interested
please post lots of shots and please show power usage if you can.
August 15, 2015, 12:51:19 PM
My SFARDS unit is working just fine at the speeds advertised. The software interface is a little confusing to setup, and I haven't figured out how to overclock but I am getting 1.7TH SHA256 and 50MH Scrypt running on a 1200 Watt Evga Platinum PSU and power draw is about what I expected. I can post some screen shots of pool stats or the web interface for the controller for anyone that is interested
August 15, 2015, 10:31:13 AM
i want to buy some
any link?
any link?
August 14, 2015, 03:38:40 PM
Almost there:
@J4bberwock,
will you create a new post specifically for your new toys? So far I could see, I'm betting all my coins on your project than SF100...
I would love to have a custom made board like this one ... I 'm watching this one a lot .
I have to agree looks very nice with white PCB! Thanks for keeping us up to date.
To be able to play with these chips and not pay 1.2k would have many customers I think. So I think you have a market
August 14, 2015, 10:35:07 AM
Almost there:
@J4bberwock,
will you create a new post specifically for your new toys? So far I could see, I'm betting all my coins on your project than SF100...
I would love to have a custom made board like this one ... I 'm watching this one a lot .
Jump to: