[ANN] Sfards:SF100, the first 28nm Dual-Mode Miner is accepting pre-order now - page 21.

alienesb

hero member

Activity: 868

Merit: 1000

Quote from: J4bberwock on August 08, 2015, 06:05:09 AM

Quote from: bigredbutton on August 08, 2015, 04:57:13 AM

**searches for J4bberwock group buy thread**

Nope, not yet.... Will check back again shortly.

Don't expect it for at least 2 weeks. I'm extremely busy with breakout boards orders and another large project.
US distribution will most likely be with my usual resellers (Finksy, Holybitcoin, and maybe 1 or 2 new ones who showed interest in the early stage of the project).
It will save a lot on shipping for small orders.

Europe will be handled by me for now.

Are you selling these with the Orb's heatsink or just the board? If we just want the board (because we have Orb bodies) will they be cheaper? Thanks!

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: J4bberwock on August 08, 2015, 06:05:09 AM

Quote from: bigredbutton on August 08, 2015, 04:57:13 AM

**searches for J4bberwock group buy thread**

Nope, not yet.... Will check back again shortly.

Don't expect it for at least 2 weeks. I'm extremely busy with breakout boards orders and another large project.
US distribution will most likely be with my usual resellers (Finksy, Holybitcoin, and maybe 1 or 2 new ones who showed interest in the early stage of the project).
It will save a lot on shipping for small orders.

Europe will be handled by me for now.

I will send Finksy a pm

J4bberwock

hero member

Activity: 840

Merit: 1000

Quote from: bigredbutton on August 08, 2015, 04:57:13 AM

**searches for J4bberwock group buy thread**

Nope, not yet.... Will check back again shortly.

Don't expect it for at least 2 weeks. I'm extremely busy with breakout boards orders and another large project.
US distribution will most likely be with my usual resellers (Finksy, Holybitcoin, and maybe 1 or 2 new ones who showed interest in the early stage of the project).
It will save a lot on shipping for small orders.

Europe will be handled by me for now.

bigredbutton

full member

Activity: 209

Merit: 100

**searches for J4bberwock group buy thread**

Nope, not yet.... Will check back again shortly.

qctechno

sr. member

Activity: 307

Merit: 250

Count me in +1

jelin1984

legendary

Activity: 2408

Merit: 1004

I am in for 3

alienesb

hero member

Activity: 868

Merit: 1000

Quote from: philipma1957 on August 06, 2015, 11:57:53 AM

@J4bberwock when you are ready I will take one of them.

Yep count me in too

zerocoder

full member

Activity: 252

Merit: 100

@J4bberwock I also want to buy 1

seems like everybody waiting for it

valkir

legendary

Activity: 1484

Merit: 1004

I also curious to try one of these! Wink

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

@J4bberwock when you are ready I will take one of them.

jstefanop

legendary

Activity: 2174

Merit: 1401

Quote from: kenshirothefist on August 06, 2015, 05:08:29 AM

Quote from: J4bberwock on August 06, 2015, 02:23:08 AM

Quote from: alh on August 06, 2015, 12:55:28 AM

One thing I'll add. I am pretty sure I saw that the chips would sell for roughly $30 each. That would put the parts cost for this in at least the $70-80 range (wild guess on my part). Maybe j4bberwock got a better price, but I don't think anybody should expect this to be cheap.

Final retail price will be close to $150.
You are right on the price of the chips, you can't get them really cheaper.
Then, you add the PCB, the other components, and the cost of the assembly.
To be transparent, they will cost me at least $125 including import taxes and VAT.
And we are speaking of a bulk order of over 1000 boards.

J4bberwock, which software will support these miners? Will cgminer or bfgminer devs add support for these devices, or is ancient minerd (the one that is also used for SFARDS official miner) the only one that is going to be supported?

It will be minerd initially, but the driver code is structured quit well so I might be adding bfgminer support pretty quickly.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: Tigggger on August 06, 2015, 10:46:29 AM

First report of actual units in the wild, but don't get excited it's not good news

Quote from: pcfli on August 06, 2015, 09:38:19 AM

5 units sfards miner already arrive in our farm, but the quality is not as good as they promise, only 1 of them run at 1.5T/48M, all other four canot farm at promised hashrate, 2 of them canot run at all, ask other friend got similar report. already ask sfards technician to provide help, but i think it is better to wait until the quality become more stable, it will be a nightmare for our employee if a large batch of miner canot run stable

well I would say it is about time. and 1.5th along with 48m are meh .. I would love to know what power use is.

A 1.5th with a 48m earn 119usd + 123usd monthly or 242 total before power so if they use 1kwatt that is 72 usd per month at 10 cents.

242-72 = 170 at 1400 with shipping you are looking at 8 months 2 weeks to break even. This is bullish since I used 0 for diff increase and kept the ltc ½ out of the picture.

Tigggger

legendary

Activity: 1098

Merit: 1000

First report of actual units in the wild, but don't get excited it's not good news

Quote from: pcfli on August 06, 2015, 09:38:19 AM

5 units sfards miner already arrive in our farm, but the quality is not as good as they promise, only 1 of them run at 1.5T/48M, all other four canot farm at promised hashrate, 2 of them canot run at all, ask other friend got similar report. already ask sfards technician to provide help, but i think it is better to wait until the quality become more stable, it will be a nightmare for our employee if a large batch of miner canot run stable

J4bberwock

hero member

Activity: 840

Merit: 1000

Quote from: kenshirothefist on August 06, 2015, 05:08:29 AM

Quote from: J4bberwock on August 06, 2015, 02:23:08 AM

Quote from: alh on August 06, 2015, 12:55:28 AM

One thing I'll add. I am pretty sure I saw that the chips would sell for roughly $30 each. That would put the parts cost for this in at least the $70-80 range (wild guess on my part). Maybe j4bberwock got a better price, but I don't think anybody should expect this to be cheap.

Final retail price will be close to $150.
You are right on the price of the chips, you can't get them really cheaper.
Then, you add the PCB, the other components, and the cost of the assembly.
To be transparent, they will cost me at least $125 including import taxes and VAT.
And we are speaking of a bulk order of over 1000 boards.

J4bberwock, which software will support these miners? Will cgminer or bfgminer devs add support for these devices, or is ancient minerd (the one that is also used for SFARDS official miner) the only one that is going to be supported?

For now, only cpuminer works.
CGminer/BFGminer will be done if the devs can get the hardware.

Regarding hashing speeds and efficiency, they will be given in a few days once the next boards will be received and tested, but you can easily guess them from the chips specs.

TheRealSteve

hero member

Activity: 686

Merit: 500

FUN > ROI

Quote from: jelin1984 on August 06, 2015, 03:38:20 AM

what willbe the hashing scrypt speed?

Practical:

Quote from: J4bberwock on August 05, 2015, 04:49:23 PM

Definitive answer will be in 7-10 days once a few details will be fixed.

Theoretical from stats in first post:

Quote from: Sfards on March 11, 2015, 06:29:37 AM

SF100 dual-mode miner has 24 SF3301 chips, with the running modes as following:
[...]

Litecoin single mining mode: Hashing power 47 MHS

[...]
It is also possible to overclock to certain extent (Sha-256: 2T, Scrypt: 55M).
[...]
After strenuous testing of the SF3301, we reached hashrates of 152GH/s for SHA-256 and 3.17MH/s for Scrypt.

47Mh/s / 24 * 2 = 3.92Mh/s - lower bound
55Mh/s / 24 * 2 = 4.58Mh/s - upper bound
3.17Mh/s * 2 = 6.34Mh/s - optimistic bound

kenshirothefist

sr. member

Activity: 457

Merit: 273

Quote from: J4bberwock on August 06, 2015, 02:23:08 AM

Quote from: alh on August 06, 2015, 12:55:28 AM

One thing I'll add. I am pretty sure I saw that the chips would sell for roughly $30 each. That would put the parts cost for this in at least the $70-80 range (wild guess on my part). Maybe j4bberwock got a better price, but I don't think anybody should expect this to be cheap.

Final retail price will be close to $150.
You are right on the price of the chips, you can't get them really cheaper.
Then, you add the PCB, the other components, and the cost of the assembly.
To be transparent, they will cost me at least $125 including import taxes and VAT.
And we are speaking of a bulk order of over 1000 boards.

J4bberwock, which software will support these miners? Will cgminer or bfgminer devs add support for these devices, or is ancient minerd (the one that is also used for SFARDS official miner) the only one that is going to be supported?

jelin1984

legendary

Activity: 2408

Merit: 1004

what willbe the hashing scrypt speed?

J4bberwock

hero member

Activity: 840

Merit: 1000

Quote from: alh on August 06, 2015, 12:55:28 AM

One thing I'll add. I am pretty sure I saw that the chips would sell for roughly $30 each. That would put the parts cost for this in at least the $70-80 range (wild guess on my part). Maybe j4bberwock got a better price, but I don't think anybody should expect this to be cheap.

Final retail price will be close to $150.
You are right on the price of the chips, you can't get them really cheaper.
Then, you add the PCB, the other components, and the cost of the assembly.
To be transparent, they will cost me at least $125 including import taxes and VAT.
And we are speaking of a bulk order of over 1000 boards.

alh

legendary

Activity: 1846

Merit: 1052

One thing I'll add. I am pretty sure I saw that the chips would sell for roughly $30 each. That would put the parts cost for this in at least the $70-80 range (wild guess on my part). Maybe j4bberwock got a better price, but I don't think anybody should expect this to be cheap.

J4bberwock

hero member

Activity: 840

Merit: 1000

Quote from: thefix on August 05, 2015, 03:39:28 PM

Quote from: jstefanop on August 05, 2015, 03:09:35 PM

Quote from: philipma1957 on August 05, 2015, 02:08:40 PM

Quote from: adaseb on August 05, 2015, 02:03:44 PM

So besides the Zoomhash website, is there any other place to buy these miners at a more fair price?

Not aware of them in any USA seller other then Zoomhash. And like everyone else I have not seen a photo of one in action.

Here is one in "action" Wink

Do the chips live up to the stated specs?

Definitive answer will be in 7-10 days once a few details will be fixed.
I'm currently on vacations, and working on it with only some basic tools.
One of the details is the final choice of the voltage converter for the chips.
The one I'm currently using mixes 2 brands, and they don't seem to like to work together.
So I'll probably switch everything to TI chips.

Topic: [ANN] Sfards:SF100, the first 28nm Dual-Mode Miner is accepting pre-order now - page 21. (Read 129801 times)