Mobo? HA! What about the power supply?
Those must be 4 7990s and I'll guess 3-4 psus are being used..
Topic: [ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner - page 47. (Read 877859 times)
August 15, 2015, 10:58:20 AM
Those must be 4 7990s and I'll guess 3-4 psus are being used..
August 15, 2015, 10:52:18 AM
Mobo? HA! What about the power supply?
August 15, 2015, 09:36:40 AM
Hi guys need help on a rig i have 1x R9 280x and 3x 750 Ti how can i mine with R9 with sgminer because i get error the ccminer for nvidia work perfect.
Any sugestions?
Thx in advance
Any sugestions?
Thx in advance
1) Ensure that all cards work - GPU-Z/Device Manager/AfterBurner
2) Start miner on AMD GPU only, use --gpu-platform. If it won't work at all - re-install AMD drivers. If it will work but won't display temp/speeds or enter "3d mode" when mining - you need dummy plug. R9 290x can use simple DVI dummy with resistors. Or you can plug monitor in it.
nvidia and amd use two different drivers to access the cards in the system ...
you cannot mix and match them ... at least not from a 'standard' point of view ...
you cannot mix and match them ... at least not from a 'standard' point of view ...
Yeah.. right..
for all the time ive been mining - i have never seen this done successfully ... especially with windows ...
now i have
...the farm will still be sticking with linux - but damn good to see ...
btw - how did you get all 10 gpus in the one system without a BIOS change? ...
#crysx
Check his signature.
And i have to say. Congrats. Been able to get 8 running on linux. Had no more space to connect any extra gpu's.
And yes, i would also love to know what mobo that is. Gotta go get me one of those for sure
Greetings
August 15, 2015, 08:58:48 AM
August 15, 2015, 07:53:44 AM
Hi guys need help on a rig i have 1x R9 280x and 3x 750 Ti how can i mine with R9 with sgminer because i get error the ccminer for nvidia work perfect.
Any sugestions?
Thx in advance
Any sugestions?
Thx in advance
1) Ensure that all cards work - GPU-Z/Device Manager/AfterBurner
2) Start miner on AMD GPU only, use --gpu-platform. If it won't work at all - re-install AMD drivers. If it will work but won't display temp/speeds or enter "3d mode" when mining - you need dummy plug. R9 290x can use simple DVI dummy with resistors. Or you can plug monitor in it.
nvidia and amd use two different drivers to access the cards in the system ...
you cannot mix and match them ... at least not from a 'standard' point of view ...
you cannot mix and match them ... at least not from a 'standard' point of view ...
Yeah.. right..
for all the time ive been mining - i have never seen this done successfully ... especially with windows ...
now i have
...the farm will still be sticking with linux - but damn good to see ...
btw - how did you get all 10 gpus in the one system without a BIOS change? ...
#crysx
August 15, 2015, 06:36:46 AM
Hi guys need help on a rig i have 1x R9 280x and 3x 750 Ti how can i mine with R9 with sgminer because i get error the ccminer for nvidia work perfect.
Any sugestions?
Thx in advance
Any sugestions?
Thx in advance
1) Ensure that all cards work - GPU-Z/Device Manager/AfterBurner
2) Start miner on AMD GPU only, use --gpu-platform. If it won't work at all - re-install AMD drivers. If it will work but won't display temp/speeds or enter "3d mode" when mining - you need dummy plug. R9 290x can use simple DVI dummy with resistors. Or you can plug monitor in it.
nvidia and amd use two different drivers to access the cards in the system ...
you cannot mix and match them ... at least not from a 'standard' point of view ...
you cannot mix and match them ... at least not from a 'standard' point of view ...
Yeah.. right..
August 15, 2015, 03:52:50 AM
Can someone help me with a config for AMD 7950 for Lyra2REv2
August 15, 2015, 03:31:10 AM
On Linux you can easily mine with AMD and nvidia cards together. Use AMD as primary then install cuda without opengl.
dont they both need different drivers? ...
i tried this a while ago and it just refused to work ...
#crysx
You can install both drivers on the same machine; the nvidia one and cuda should be installed by the run file, not the deb.
August 15, 2015, 03:10:05 AM
On Linux you can easily mine with AMD and nvidia cards together. Use AMD as primary then install cuda without opengl.
dont they both need different drivers? ...
i tried this a while ago and it just refused to work ...
#crysx
August 15, 2015, 03:00:16 AM
On Linux you can easily mine with AMD and nvidia cards together. Use AMD as primary then install cuda without opengl.
August 15, 2015, 12:00:38 AM
Hi guys need help on a rig i have 1x R9 280x and 3x 750 Ti how can i mine with R9 with sgminer because i get error the ccminer for nvidia work perfect.
Any sugestions?
Thx in advance
Any sugestions?
Thx in advance
Try creating a fake display by detecting then extending the main display to the nvidia cards.
Ok thx guys i let u know if i can make them works
August 14, 2015, 07:21:23 PM
Hi guys need help on a rig i have 1x R9 280x and 3x 750 Ti how can i mine with R9 with sgminer because i get error the ccminer for nvidia work perfect.
Any sugestions?
Thx in advance
Any sugestions?
Thx in advance
Try creating a fake display by detecting then extending the main display to the nvidia cards.
August 14, 2015, 06:43:13 PM
Hi guys need help on a rig i have 1x R9 280x and 3x 750 Ti how can i mine with R9 with sgminer because i get error the ccminer for nvidia work perfect.
Any sugestions?
Thx in advance
Any sugestions?
Thx in advance
nvidia and amd use two different drivers to access the cards in the system ...
you cannot mix and match them ... at least not from a 'standard' point of view ...
so suggestion is simple - remove the amd card and put it in a different system ( or build a small system ) that will be used for mining on that card alone ...
it required catalyst drivers and ( im assuming from the description ) you have nvidia drivers installed ...
btw - depending on what you are mining - you are MUCH better off using one of the forks of ccminer for the nvidia mining ...
the most universal one is sp's fork - but there are a few that are suited to different mining - like tpruvot and djm34 etc ...
sp-mod is here - https://bitcointalksearch.org/topic/ccminersp-mod-modded-nvidia-maxwell-pascal-kernels-826901 ...
#crysx
August 14, 2015, 10:14:19 AM
Hi guys need help on a rig i have 1x R9 280x and 3x 750 Ti how can i mine with R9 with sgminer because i get error the ccminer for nvidia work perfect.
Any sugestions?
Thx in advance
Any sugestions?
Thx in advance
August 06, 2015, 11:28:34 AM
nobody do not know
August 05, 2015, 09:59:48 AM
Any idea what is the profit from ETH ? 
August 04, 2015, 07:21:30 PM
Update as to my prior post. It seems that the 2nd 7990 core is recognized (rather than the cpu which I had previously thought... the hashrate on the cpu and the gpu core on intensity 8 is about the same). The 2nd core does not take configuration values by default. I am able to increase the intensity to the desired level manually, but it will not accept core or memory settings at all. Neither core has temperature information shown within the miner.
Is this because the gpu is not being fully recognized or mapped? The miner will be being restarted frequently due to some custom software I run, so the core not taking on the configuration values is problematic.
Thanks in advance for any advice!
Is this because the gpu is not being fully recognized or mapped? The miner will be being restarted frequently due to some custom software I run, so the core not taking on the configuration values is problematic.
Thanks in advance for any advice!
August 03, 2015, 06:59:44 AM
Quote
Code:
[11:54:08] [THR0] OCL NONCE 0000f590 (62864) found in slot 0 (found = 255)
[11:54:08] [THR0] GPU0: invalid nonce - HW error
[11:54:08] [THR0] Discarded cloned or rolled work
[11:54:08] GPU 0 found something?
[11:54:08] [THR0] OCL NONCE 0000f8c1 (63681) found in slot 0 (found = 255)
[11:54:08] [THR0] GPU0: invalid nonce - HW error
[11:54:08] [THR0] Discarded cloned or rolled work
[11:54:08] [THR0] Staged work: total (2) > max (1), discarding
[11:54:08] [THR0] Discarded work
[11:54:08] Selecting x11.eu.nicehash.com for work
[11:54:08] [THR0] gen_stratum_work() - algorithm = ckolivas
[11:54:08] [THR0] Generated stratum merkle a96b3b75691bc9e414687b7b68620a7ab169ab81c1063f7c1bcece552e247227
[11:54:08] [THR0] Generated stratum header 0000000362b3289a43114ccbbff96c87e819b1328a715f990d4381bd01e4493000000000a96b3
b75691bc9e414687b7b68620a7ab169ab81c1063f7c1bcece552e24722755bf3a3d1c050d6e000000000000008000000000000000000000000000000
00000000000000000000000000000000000000000000000000080020000
[11:54:08] [THR0] Work job_id 0000000366b1de49 nonce2 7 ntime 55bf3a3d
[11:54:08] [THR0] Generated target 0000000000000080000000000000008000000000000000b5ffffffffcdff3100
[11:54:08] Generated stratum work
[11:54:08] [THR0] Pushing work from x11.eu.nicehash.com to hash queue
I'm noob at this, but I want to learn how to make this work.
The line "[11:54:08] [THR0] gen_stratum_work() - algorithm = ckolivas" leads me to believe that you are trying to mine an X11 coin using a scrypt kernel. You need to set the algorithm to "darkcoin-mod" in order to hash correctly I think.
hero member
Activity: 1088
Merit: 531
Free Crypto in Stake.com Telegram t.me/StakeCasino
August 03, 2015, 05:28:27 AM
I'm trying to use this miner with x11 algo, but no luck.I'm getting this error: Rejected 1287f082(-> this number changes) Diff 13/0.020 GPU 0 (Share above target.)
My GPU is MSI R9 270 (2GB), I'm using Windows 10 Pro 64-bit and latest AMD drivers..
Anyone knows a solution?
My GPU is MSI R9 270 (2GB), I'm using Windows 10 Pro 64-bit and latest AMD drivers..
Anyone knows a solution?
thats like saying 'my car isnt working - can anyone help' ... without actually specifying what the issue is ...
you need to publish your settings for anyone to be able to help - if they can ...
this is obviously a setup issue - so we need to know what os - what miner - and the settings that you are using ...
tanx ...
#crysx
GPU:
Code:
Temp: 50.0 C
Fan Speed: 18% (968 RPM)
Engine Clock: 955 MHz
Memory Clock: 1400 Mhz
Vddc: 1.163 V
Activity: 95%
Powertune: 0%
Fan autotune is disabled (0-85)
GPU engine clock autotune is disabled (955-955)
Code:
[11:54:08] [THR0] OCL NONCE 0000f590 (62864) found in slot 0 (found = 255)
[11:54:08] [THR0] GPU0: invalid nonce - HW error
[11:54:08] [THR0] Discarded cloned or rolled work
[11:54:08] GPU 0 found something?
[11:54:08] [THR0] OCL NONCE 0000f8c1 (63681) found in slot 0 (found = 255)
[11:54:08] [THR0] GPU0: invalid nonce - HW error
[11:54:08] [THR0] Discarded cloned or rolled work
[11:54:08] [THR0] Staged work: total (2) > max (1), discarding
[11:54:08] [THR0] Discarded work
[11:54:08] Selecting x11.eu.nicehash.com for work
[11:54:08] [THR0] gen_stratum_work() - algorithm = ckolivas
[11:54:08] [THR0] Generated stratum merkle a96b3b75691bc9e414687b7b68620a7ab169ab81c1063f7c1bcece552e247227
[11:54:08] [THR0] Generated stratum header 0000000362b3289a43114ccbbff96c87e819b1328a715f990d4381bd01e4493000000000a96b3
b75691bc9e414687b7b68620a7ab169ab81c1063f7c1bcece552e24722755bf3a3d1c050d6e000000000000008000000000000000000000000000000
00000000000000000000000000000000000000000000000000080020000
[11:54:08] [THR0] Work job_id 0000000366b1de49 nonce2 7 ntime 55bf3a3d
[11:54:08] [THR0] Generated target 0000000000000080000000000000008000000000000000b5ffffffffcdff3100
[11:54:08] Generated stratum work
[11:54:08] [THR0] Pushing work from x11.eu.nicehash.com to hash queue
I'm noob at this, but I want to learn how to make this work.
August 02, 2015, 09:56:53 PM
I'm trying to use this miner with x11 algo, but no luck.I'm getting this error: Rejected 1287f082(-> this number changes) Diff 13/0.020 GPU 0 (Share above target.)
My GPU is MSI R9 270 (2GB), I'm using Windows 10 Pro 64-bit and latest AMD drivers..
Anyone knows a solution?
My GPU is MSI R9 270 (2GB), I'm using Windows 10 Pro 64-bit and latest AMD drivers..
Anyone knows a solution?
thats like saying 'my car isnt working - can anyone help' ... without actually specifying what the issue is ...
you need to publish your settings for anyone to be able to help - if they can ...
this is obviously a setup issue - so we need to know what os - what miner - and the settings that you are using ...
tanx ...
#crysx
Jump to: