Have an error when trying to mine with sgminer on nvidia 1060 GPUs:
[12:31:34] ptxas application ptx input, line 9; fatal : Unsupported .version 6.0; current version is '5.0'
ptxas fatal : Ptx assembly aborted due to errors
Can't figure out whats the problem is in. Any thoughts?
Topic: [ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner - page 8. (Read 877843 times)
July 19, 2017, 09:58:05 AM
July 16, 2017, 02:49:14 PM
Ok, through some trial and error I got pass this stage, however I'm still having issues, on suprnova it does not show a hash rating, nor is it getting any coins.
This is what my .bat files looks like now:
sgminer.exe -I 13 -w 128 -k myr-gr --no-submit-stale -o stratum+tcp://dgbg.suprnova.cc:7978 -u worker.01 -p workerpw
This executes and runs, and everything as far as I can tell looks ok, but I'm not getting a hashrate on my pool(ran it for like 15 minutes).
Any ideas on what I might be doing wrong? Also, what does the "-w 128" specify??
[/quote]
Try:
sgminer.exe -I 18 -w 64 -k myr-gr --no-submit-stale -o stratum+tcp://dgbg.suprnova.cc:7978 -u worker.01 -p d=0.03
July 08, 2017, 10:08:25 PM
Hey guys, I need some help.
I'm trying to get SGminer 5.6.1 (windows) to work with Digibyte Myriad-Groestl on Suprnova Pool.
I created a bat file that I put into the SGminer folder and here's the contents of it:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
sgminer.exe -I 20 -g 4 -w 128 -k myriadcoin-groestl --no-submit-stale -o stratum+tcp://dgbg.suprnova.cc:7978 -u worker.01 -p workerpw
However I get a few failure notices when I try to start it:
"
error: Clang front-end compilation failed!
Frontend phase failed compilation.
Error: Compiling CL to IR
Failed to init GPU thread 0, disabling device 0
Restarting the GPU from the menu will not fix this.
Re-check your configuration and try restarting.
"
Other notes:
I'm running 3 R9 Fury's and 1 Radeon Pro Duo with driver 16.32 on windows 7
Any ideas??
I'm trying to get SGminer 5.6.1 (windows) to work with Digibyte Myriad-Groestl on Suprnova Pool.
I created a bat file that I put into the SGminer folder and here's the contents of it:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
sgminer.exe -I 20 -g 4 -w 128 -k myriadcoin-groestl --no-submit-stale -o stratum+tcp://dgbg.suprnova.cc:7978 -u worker.01 -p workerpw
However I get a few failure notices when I try to start it:
"
error: Clang front-end compilation failed!
Frontend phase failed compilation.
Error: Compiling CL to IR
Failed to init GPU thread 0, disabling device 0
Restarting the GPU from the menu will not fix this.
Re-check your configuration and try restarting.
"
Other notes:
I'm running 3 R9 Fury's and 1 Radeon Pro Duo with driver 16.32 on windows 7
Any ideas??
Ok, through some trial and error I got pass this stage, however I'm still having issues, on suprnova it does not show a hash rating, nor is it getting any coins.
This is what my .bat files looks like now:
sgminer.exe -I 13 -w 128 -k myr-gr --no-submit-stale -o stratum+tcp://dgbg.suprnova.cc:7978 -u worker.01 -p workerpw
This executes and runs, and everything as far as I can tell looks ok, but I'm not getting a hashrate on my pool(ran it for like 15 minutes).
Any ideas on what I might be doing wrong? Also, what does the "-w 128" specify??
July 06, 2017, 08:52:49 PM
Hey guys, I need some help.
I'm trying to get SGminer 5.6.1 (windows) to work with Digibyte Myriad-Groestl on Suprnova Pool.
I created a bat file that I put into the SGminer folder and here's the contents of it:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
sgminer.exe -I 20 -g 4 -w 128 -k myriadcoin-groestl --no-submit-stale -o stratum+tcp://dgbg.suprnova.cc:7978 -u worker.01 -p workerpw
However I get a few failure notices when I try to start it:
"
error: Clang front-end compilation failed!
Frontend phase failed compilation.
Error: Compiling CL to IR
Failed to init GPU thread 0, disabling device 0
Restarting the GPU from the menu will not fix this.
Re-check your configuration and try restarting.
"
Other notes:
I'm running 3 R9 Fury's and 1 Radeon Pro Duo with driver 16.32 on windows 7
Any ideas??
I'm trying to get SGminer 5.6.1 (windows) to work with Digibyte Myriad-Groestl on Suprnova Pool.
I created a bat file that I put into the SGminer folder and here's the contents of it:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
sgminer.exe -I 20 -g 4 -w 128 -k myriadcoin-groestl --no-submit-stale -o stratum+tcp://dgbg.suprnova.cc:7978 -u worker.01 -p workerpw
However I get a few failure notices when I try to start it:
"
error: Clang front-end compilation failed!
Frontend phase failed compilation.
Error: Compiling CL to IR
Failed to init GPU thread 0, disabling device 0
Restarting the GPU from the menu will not fix this.
Re-check your configuration and try restarting.
"
Other notes:
I'm running 3 R9 Fury's and 1 Radeon Pro Duo with driver 16.32 on windows 7
Any ideas??
July 02, 2017, 07:08:28 AM
Sgminer starts and returns to the command prompt without error, any suggestions ?
Similar problem.
I have similar problem in win10 on win7 no problem ... why?
Thanks
July 02, 2017, 02:42:17 AM
Sgminer starts and returns to the command prompt without error, any suggestions ?
Similar problem.
I have similar problem in win10 on win7 no problem ... why?
Thanks
June 29, 2017, 02:33:55 PM
Sgminer starts and returns to the command prompt without error, any suggestions ?
Similar problem.
June 29, 2017, 07:12:53 AM
Sgminer starts and returns to the command prompt without error, any suggestions ?
June 20, 2017, 07:52:48 AM
Hi all,
Please help me
I'm trying to undermine this crypto alone (because for the moment and so) https://bitcointalksearch.org/topic/subject-ann-bitcoinplanet-btpl-skein-algo-looking-for-mining-pool-1971728
I have an AMD card and sgminer but I can not get it started.
I opened sgminer.exe and typed URL http://127.0.0.1:33075 and after user and pass and I came out of a screen; http://imgur.com/a/ON9d6
Then type G (G) PU MANAGEMENT and exit this screen; http://imgur.com/a/hLPks
Then type (E) NABLE and exit this screen; http://imgur.com/a/lcT2N
So at this point does not part hash
Where am I wrong?
Please help me
Thank you
Please help me
I'm trying to undermine this crypto alone (because for the moment and so) https://bitcointalksearch.org/topic/subject-ann-bitcoinplanet-btpl-skein-algo-looking-for-mining-pool-1971728
I have an AMD card and sgminer but I can not get it started.
I opened sgminer.exe and typed URL http://127.0.0.1:33075 and after user and pass and I came out of a screen; http://imgur.com/a/ON9d6
Then type G (G) PU MANAGEMENT and exit this screen; http://imgur.com/a/hLPks
Then type (E) NABLE and exit this screen; http://imgur.com/a/lcT2N
So at this point does not part hash
Where am I wrong?
Please help me
Thank you
June 11, 2017, 02:51:43 AM
I was mining DGB on my pc using sgminer 5.6.1 and everything was fine, but I decided to install Crimson 15.12 driver and now the miner doesn't send any share to pool.
http://imgur.com/a/K86jY
Screenshot
http://imgur.com/a/K86jY
I noticed that WU is 0.000/m all time, It was on 0.05 before.
I'm using an AMD Radeon R7 Series
How I can fix it?
http://imgur.com/a/K86jY
Screenshot
http://imgur.com/a/K86jY
I noticed that WU is 0.000/m all time, It was on 0.05 before.
I'm using an AMD Radeon R7 Series
How I can fix it?
15.12 is good for the Claymore miners.
June 02, 2017, 03:01:53 PM
I was mining DGB on my pc using sgminer 5.6.1 and everything was fine, but I decided to install Crimson 15.12 driver and now the miner doesn't send any share to pool.
http://imgur.com/a/K86jY
Screenshot
http://imgur.com/a/K86jY
I noticed that WU is 0.000/m all time, It was on 0.05 before.
I'm using an AMD Radeon R7 Series
How I can fix it?
http://imgur.com/a/K86jY
Screenshot
http://imgur.com/a/K86jY
I noticed that WU is 0.000/m all time, It was on 0.05 before.
I'm using an AMD Radeon R7 Series
How I can fix it?
I assume You can roll back driver in Device Manager/properties of gpus...
June 02, 2017, 02:30:56 PM
I was mining DGB on my pc using sgminer 5.6.1 and everything was fine, but I decided to install Crimson 15.12 driver and now the miner doesn't send any share to pool.
http://imgur.com/a/K86jY
Screenshot
http://imgur.com/a/K86jY
I noticed that WU is 0.000/m all time, It was on 0.05 before.
I'm using an AMD Radeon R7 Series
How I can fix it?
http://imgur.com/a/K86jY
Screenshot
http://imgur.com/a/K86jY
I noticed that WU is 0.000/m all time, It was on 0.05 before.
I'm using an AMD Radeon R7 Series
How I can fix it?
May 20, 2017, 12:51:19 PM
sgminer-5.*****-nicehash-***** = VIRUS TROYAN GdSda.A
Is that real?
I do not think so. That is just a false alarm.
May 09, 2017, 02:32:30 PM
sgminer-5.*****-nicehash-***** = VIRUS TROYAN GdSda.A
Is that real?
May 05, 2017, 06:29:25 AM
sgminer-5.*****-nicehash-***** = VIRUS TROYAN GdSda.A
April 16, 2017, 11:35:16 AM
https://bitcointalksearch.org/topic/m.18613098 is where I talked about the exact issue.
April 16, 2017, 10:20:48 AM
I can't mine using this command
Bin\AMD-GenesisMining\sgminer.exe --api-listen -k groestlcoin -o stratum+ssl://hub.miningpoolhub.com:17004 -u aaronsace -p x --gpu-threads 2 --worksize 128 --intensity d
I got this result:
I think I must have put the entry incorrectly. Why is sgminer search for http://stratum+ssl://hub.miningpoolhub.com:17004 ?
Why there is http:// before stratum+ssl://
However, other people have tried the exact same command and claim that it works. Yes aaronsace is not even my user name. It's a username that's proven to work.
So I wonder where I am wrong?
Maybe I put pool and worker info wrong. However, others have tried exact same command and it works.
Maybe I put wrong attributes?
Maybe I have some missing library?
WHat do you do if you try that command?
Bin\AMD-GenesisMining\sgminer.exe --api-listen -k groestlcoin -o stratum+ssl://hub.miningpoolhub.com:17004 -u aaronsace -p x --gpu-threads 2 --worksize 128 --intensity d
I got this result:
Code:
[21:14:39] Started sgminer 5.5.5-gm
[21:14:39] * using Jansson 2.7
[21:14:40] Probing for an alive pool
[21:15:40] No servers were found that could be used to get work from.
[21:15:40] Please check the details from the list below of the servers you have input
[21:15:40] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[21:15:40] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: aaronsace Password: x
[21:15:40] Press any key to exit, or sgminer will try again in 15s.
[21:15:56] No servers were found that could be used to get work from.
[21:15:56] Please check the details from the list below of the servers you have input
[21:15:56] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[21:15:56] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: aaronsace Password: x
[21:15:56] Press any key to exit, or sgminer will try again in 15s.
[21:16:12] No servers were found that could be used to get work from.
[21:16:12] Please check the details from the list below of the servers you have input
[21:16:12] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[21:16:12] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17004 User: aaronsace Password: x
[21:16:12] Press any key to exit, or sgminer will try again in 15s.
I think I must have put the entry incorrectly. Why is sgminer search for http://stratum+ssl://hub.miningpoolhub.com:17004 ?
Why there is http:// before stratum+ssl://
However, other people have tried the exact same command and claim that it works. Yes aaronsace is not even my user name. It's a username that's proven to work.
So I wonder where I am wrong?
Maybe I put pool and worker info wrong. However, others have tried exact same command and it works.
Maybe I put wrong attributes?
Maybe I have some missing library?
WHat do you do if you try that command?
April 13, 2017, 02:59:01 PM
Hi to all, I'm a newbie in this world...
Trying to mine Centurion - changed wallet in centurion.bat as stated but I can't see centuron on my walle - used both local account and Centurionwallet account. What I'm doing wrong?
Thanks in advance
Trying to mine Centurion - changed wallet in centurion.bat as stated but I can't see centuron on my walle - used both local account and Centurionwallet account. What I'm doing wrong?
Thanks in advance
April 02, 2017, 11:49:31 AM
Hi, there is a problem with sgminer/5.5.1-b, pool switching is not working on Baikal a900, after auto or manual switch miner does not produce accepted shares, need to restart, all the newer version miners affected! Is there a way to fix it somehow? What can cause this?
March 25, 2017, 03:49:25 AM
Hi,
I cannot start SGminer neither with milti-algo conf or single on windows 8.1. (tried V5 and also the latest version) The miner starts and closes without any error.
I have two HD 7790 cards installed and they work ok through the nicehash interface or optiminer_zcash_win but would like to try multi-algo option with sgminer...
Thanks
Orlando
I cannot start SGminer neither with milti-algo conf or single on windows 8.1. (tried V5 and also the latest version) The miner starts and closes without any error.
I have two HD 7790 cards installed and they work ok through the nicehash interface or optiminer_zcash_win but would like to try multi-algo option with sgminer...
Thanks
Orlando
Bump... Can anyone help me please?
You need to try various versions of the sgminer. For my rigs, some rig work on 5.5.5, some on 5.5.4 or early versions, Some have the same problem as yours.
Jump to: