Topic: [ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers - page 3. (Read 90638 times)
July 22, 2014, 02:52:07 AM
hi, this sgminer work pn x15 (algorithm bitblock)) or not?
July 15, 2014, 03:54:06 PM
This is the miner I use. If you have problems with your card delete the .conf file that is included and pass parameters on the command line instead.
July 15, 2014, 12:28:35 PM
Do 14.6 drivers capable to run 6 GPU's in win8.1? I've already tried to install but only 5 GPU's are running okay, can't get rid of code 43 error for the 6th gpu. Any clue?
I have the same problem and been trying to fix it for 2 weeks now. Since I updated to 14.6 I can only get 5 gpu's to work and get error 43 on the other. Runnings Windows 8.1 64 bit. I used the amd cleanup utility to wipe 14.6 and went back to 13.12 since thats what I had before but it didn't help.
Does anyone have a fix for this?
July 14, 2014, 10:06:26 AM
Please can somebody share NIST5 .bin created with AMD 14.6 drivers for 280x (nist5Tahitiglg....bin)?
Thx
Thx
hereyou go
Code:
https://mega.co.nz/#!ohMVVQjZ!Jbhr82S1ZsXGBPx0PaoU632DlN-g3n0TemNbMRbpkIc
i get 13-13.50mh/s
i run 2 7970s and 1 280x on this rig hope it helps...
July 14, 2014, 09:06:12 AM
Not sure how you're supposed to use nist5 with this miner, the kernel isn't included... :l
Looking a bit closer, none of the algos mentioned in the opening post are included with this release. Was the upload file changed to something else?
Looking a bit closer, none of the algos mentioned in the opening post are included with this release. Was the upload file changed to something else?
July 13, 2014, 12:56:35 PM
Please can somebody share NIST5 .bin created with AMD 14.6 drivers for 280x (nist5Tahitiglg....bin)?
Thx
Thx
July 13, 2014, 10:17:17 AM
guy how can i mine nist5 algo on linux bamt ... any good link ... coz i cant find.
i have bamt1.6.2
ty very much
i have bamt1.6.2
ty very much
July 13, 2014, 05:25:02 AM
How can nist5 be cooler when my rigs gets hot as they did with X11?and my fan are louder now???
First time using nist5 with this baby on on my 5x 280x rig! It is much more optiimized it seem, than other miners? I dont know, first time trying out nist5, and haven't dug much into it.
I get 4.15mh/s per BIOS undervolted 280x on x11
I get 5.85mh/s on nist5
Exact same settings. Does this look good, or should I try tweaking my configs all all?
July 13, 2014, 04:55:53 AM
with 280X you have to reach about 13 MH with modded talkcoin kernel...
July 13, 2014, 03:59:55 AM
How can nist5 be cooler when my rigs gets hot as they did with X11?and my fan are louder now???
First time using nist5 with this baby on on my 5x 280x rig! It is much more optiimized it seem, than other miners? I dont know, first time trying out nist5, and haven't dug much into it.
I get 4.15mh/s per BIOS undervolted 280x on x11
I get 5.85mh/s on nist5
Exact same settings. Does this look good, or should I try tweaking my configs all all?
July 13, 2014, 02:52:01 AM
How can nist5 be cooler when my rigs gets hot as they did with X11?and my fan are louder now???
July 11, 2014, 04:44:50 AM
Hello djm34,
i know it's so much to ask, but it would be great if you could tweak your miner to mine TWE algorithm
it's one of the rare good coins out there which is abandoned by the miners and i dont know why exactly
it has a strong network and some miners are still mining this coin
if you could find some free time, please take a look at this coin and this algorithm
thanks
i know it's so much to ask, but it would be great if you could tweak your miner to mine TWE algorithm
it's one of the rare good coins out there which is abandoned by the miners and i dont know why exactly
it has a strong network and some miners are still mining this coin
if you could find some free time, please take a look at this coin and this algorithm
thanks
July 10, 2014, 10:16:39 PM
Yea shame that 5xxxx/6xxx working so slow compared to newer series with x11.13.
However nist5 working just fine. Managed 6.5MH/s with 5850.
However nist5 working just fine. Managed 6.5MH/s with 5850.
July 10, 2014, 09:41:06 PM
sorry, no 7950s in my farm
July 10, 2014, 03:25:37 PM
Hi,
I have released a version of sgminer which allows to mine X11 and X13 coins using 14.6 amd drivers.
Can you make sgminer or kernel that works with HD5XXX Amd cards at greater speed ? I have released a version of sgminer which allows to mine X11 and X13 coins using 14.6 amd drivers.
Also it needs to mine X15
Tested your miner on my cards HD5xxx and frivers 14.6, and there is no improvement, moreover they are slower then on 13.12
July 10, 2014, 03:15:58 PM
do i still have to use 14.4 for hd 7950?
anyone here has a .bin file from 14.6 please?
anyone here has a .bin file from 14.6 please?
July 09, 2014, 10:02:57 PM
yes temps and fan speeds are showing
July 09, 2014, 08:39:07 AM
does your mining rig show the temp and fan speed?
The miner has been running on my test rig now for 2.5 hours. It has one Gigabyte WF 270 non X and three Sapphire 270x cards. The Gigabyte is undervolted to 1.075 volts and the 3 Sapphires are undervolted to 1.100 volts. Engine clocks down just a bit to find stability.
Running BAMT 1.6.0 upgraded to the 14.6 beta drivers, using this procedure:
http://www.reddit.com/r/BAMT/comments/28xu3i/add_amd_146_drivers_and_djm34s_optimized_sgminer/
Config:
{
"pools" : [
{
"url" : "x",
"user" : "x",
"pass" : "x"
}
],
"xintensity" : "512",
"kernel" : "x11mod",
"lookup-gap" : "2",
"shaders" : "1280",
"worksize" : "128",
"gpu-threads" : "2",
"gpu-engine" : "1050",
"gpu-fan" : "20-85",
"gpu-memclock" : "1250",
"gpu-powertune" : "20",
"temp-cutoff" : "92",
"temp-overheat" : "89",
"temp-target" : "75",
"api-listen": true,
"api-port": "4028",
"api-allow": "W:127.0.0.1",
"api-mcast-port" : "4028",
"auto-fan" : true,
"expiry" : "1",
"failover-only" : true,
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"temp-hysteresis" : "3",
"failover-switch-delay" : "30",
"no-pool-disable" : true,
"kernel-path" : "/usr/local/bin"
}
Each one hits 2.55 MH/s
Running BAMT 1.6.0 upgraded to the 14.6 beta drivers, using this procedure:
http://www.reddit.com/r/BAMT/comments/28xu3i/add_amd_146_drivers_and_djm34s_optimized_sgminer/
Config:
{
"pools" : [
{
"url" : "x",
"user" : "x",
"pass" : "x"
}
],
"xintensity" : "512",
"kernel" : "x11mod",
"lookup-gap" : "2",
"shaders" : "1280",
"worksize" : "128",
"gpu-threads" : "2",
"gpu-engine" : "1050",
"gpu-fan" : "20-85",
"gpu-memclock" : "1250",
"gpu-powertune" : "20",
"temp-cutoff" : "92",
"temp-overheat" : "89",
"temp-target" : "75",
"api-listen": true,
"api-port": "4028",
"api-allow": "W:127.0.0.1",
"api-mcast-port" : "4028",
"auto-fan" : true,
"expiry" : "1",
"failover-only" : true,
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"temp-hysteresis" : "3",
"failover-switch-delay" : "30",
"no-pool-disable" : true,
"kernel-path" : "/usr/local/bin"
}
Each one hits 2.55 MH/s
July 09, 2014, 08:15:18 AM
why my temp and fan show nothing. i have update the driver in 14.6rc2.my os is bamt1.3 .anyone who can help me,thanks
July 06, 2014, 03:17:07 PM
You should Install 14.6 , I read a thread about 14.4 , anyway , then go to https://bitcointalksearch.org/topic/annx11x13-x11-darkcoinx13-marucoin-miner-based-on-sph-sgminer-623409
here you'll find moded sgminer with 2 moded kernels for x11 and x13.
here you'll find moded sgminer with 2 moded kernels for x11 and x13.
Jump to: