I apologize for going a bit off topic, but is the faucet currently operational?
I get this message:
Correct! We have sent 1.28 MED to your address! the result is: null
But no coins are credited to my wallet.
Topic: [ANN] [SHA256]+[CPU] MediterraneanCoin (MED) - REUSE your ERUPTER!! - page 78. (Read 227779 times)
February 11, 2014, 11:36:07 AM
February 11, 2014, 11:13:37 AM
i downloaded bfgminer gen2, im using 2 block erupters on windows 32. the problem is the very low shares acepted, 1 or 2 shares every 5 min. what could be the problem?
If u have low reject rate, i think the problem is the DIFF of pool.
Post ur conf.
bfgminer -o pool -u myworker -p my_pass -S all -Q 0
little story:
I plugged 5 USB Erupters to hub and connected to ibipot.com pool.. hashrate was 600-700MHash/S total.. :O
disconnected USB's one-by-one..
finally figured out that PC has Atom CPU and was not able to perform scrypt fast enough..
Mainly when hash is low I have figured there is some kind of PC CPU limit reached.. - bottelneck CPU
For example on other i7 CPU PC my college runs cgminer-med(1st) + MCProxy3 + stratum-mining-proxy (latest posted here) he has BFL Jalapenos total has 12.5G but cgminer only shows 9-10MHash.. limiting factor on his PC is stratum-mining-proxy that appears to be single threaded (not using all CPU cores) - bottleneck CPU and proxy software
I recomend we should identify our bottlenecks and write here, so developers can develop better software
I also keep an eye on pool server, but there are lots of resources available..
EDIT: I also run 3x Antminer U1's under MacOSX, using standard bfgminer, then I run windows 8.1 (90day demo) virtualbox on the same Mac and there I use latest bfgminer-med with --http-port option connected to pool. Hasrate is 4.46 that is what it should be.. - no bottelneck, Mac CPU can handel all and I still can work at the same time.
i changed my 2 erupters to a core i3 laptop and still same results. i thought my little atom was the problem but now using a bigger CPU and still a few accepted shares per hour.
Only for experiment try my lowhashrate (low diff) server :
http://med.mine.nu/
February 11, 2014, 10:58:04 AM
i downloaded bfgminer gen2, im using 2 block erupters on windows 32. the problem is the very low shares acepted, 1 or 2 shares every 5 min. what could be the problem?
If u have low reject rate, i think the problem is the DIFF of pool.
Post ur conf.
bfgminer -o pool -u myworker -p my_pass -S all -Q 0
http://i58.tinypic.com/11rx3yh.jpg
little story:
I plugged 5 USB Erupters to hub and connected to ibipot.com pool.. hashrate was 600-700MHash/S total.. :O
disconnected USB's one-by-one..
finally figured out that PC has Atom CPU and was not able to perform scrypt fast enough..
Mainly when hash is low I have figured there is some kind of PC CPU limit reached.. - bottelneck CPU
For example on other i7 CPU PC my college runs cgminer-med(1st) + MCProxy3 + stratum-mining-proxy (latest posted here) he has BFL Jalapenos total has 12.5G but cgminer only shows 9-10MHash.. limiting factor on his PC is stratum-mining-proxy that appears to be single threaded (not using all CPU cores) - bottleneck CPU and proxy software
I recomend we should identify our bottlenecks and write here, so developers can develop better software
I also keep an eye on pool server, but there are lots of resources available..
EDIT: I also run 3x Antminer U1's under MacOSX, using standard bfgminer, then I run windows 8.1 (90day demo) virtualbox on the same Mac and there I use latest bfgminer-med with --http-port option connected to pool. Hasrate is 4.46 that is what it should be.. - no bottelneck, Mac CPU can handel all and I still can work at the same time.
i changed my 2 erupters to a core i3 laptop and still same results. i thought my little atom was the problem but now using a bigger CPU and still a few accepted shares per hour.
February 11, 2014, 08:19:43 AM
hei @cr1st0f whats up with MED hashrate?
uhuauhauhauha sorry batt it coming soon i want do a site with all stats;)
February 11, 2014, 06:13:59 AM
hei @cr1st0f whats up with MED hashrate?
February 11, 2014, 06:02:15 AM
WTB MED, Please post offers, and reasons why you think its a fair offer
February 11, 2014, 05:03:25 AM
hi all,
we have added two dll to win32 build of cgminer (libhidapi-0.dll and ftd2xx.dll), this should help in supporting some ASIC devices under Windows.
The exe build is exactly the same as before.
also the place to download is same as before:
https://github.com/mrtexaznl/cgminer/releases/tag/v3.9.0.2-mcproxy
https://github.com/mrtexaznl/cgminer/releases/download/v3.9.0.2-mcproxy/win32-cgminer.zip
we have added two dll to win32 build of cgminer (libhidapi-0.dll and ftd2xx.dll), this should help in supporting some ASIC devices under Windows.
The exe build is exactly the same as before.
also the place to download is same as before:
https://github.com/mrtexaznl/cgminer/releases/tag/v3.9.0.2-mcproxy
https://github.com/mrtexaznl/cgminer/releases/download/v3.9.0.2-mcproxy/win32-cgminer.zip
February 11, 2014, 04:19:55 AM
i downloaded bfgminer gen2, im using 2 block erupters on windows 32. the problem is the very low shares acepted, 1 or 2 shares every 5 min. what could be the problem?
If u have low reject rate, i think the problem is the DIFF of pool.
Post ur conf.
bfgminer -o pool -u myworker -p my_pass -S all -Q 0
little story:
I plugged 5 USB Erupters to hub and connected to ibipot.com pool.. hashrate was 600-700MHash/S total.. :O
disconnected USB's one-by-one..
finally figured out that PC has Atom CPU and was not able to perform scrypt fast enough..
Mainly when hash is low I have figured there is some kind of PC CPU limit reached.. - bottelneck CPU
For example on other i7 CPU PC my college runs cgminer-med(1st) + MCProxy3 + stratum-mining-proxy (latest posted here) he has BFL Jalapenos total has 12.5G but cgminer only shows 9-10MHash.. limiting factor on his PC is stratum-mining-proxy that appears to be single threaded (not using all CPU cores) - bottleneck CPU and proxy software
I recomend we should identify our bottlenecks and write here, so developers can develop better software
I also keep an eye on pool server, but there are lots of resources available..
EDIT: I also run 3x Antminer U1's under MacOSX, using standard bfgminer, then I run windows 8.1 (90day demo) virtualbox on the same Mac and there I use latest bfgminer-med with --http-port option connected to pool. Hasrate is 4.46 that is what it should be.. - no bottelneck, Mac CPU can handel all and I still can work at the same time.
February 11, 2014, 03:45:38 AM
done.
thx you for the link
greetings
thx you for the link
greetings
What soft combination use for mining?
bfgminer gen2 on a jalapeno
seems to work fine but the p2pool show no correct hashrate
weird because paiements has arrived on my wallet
https://dl.dropboxusercontent.com/u/6997766/bfgminer.jpg
https://dl.dropboxusercontent.com/u/6997766/wallet.jpg
any idea ?
February 11, 2014, 12:46:11 AM
i downloaded bfgminer gen2, im using 2 block erupters on windows 32. the problem is the very low shares acepted, 1 or 2 shares every 5 min. what could be the problem?
If u have low reject rate, i think the problem is the DIFF of pool.
Post ur conf.
bfgminer -o pool -u myworker -p my_pass -S all -Q 0
Try "low hash rate" server on my testing pool:
http://med.mine.nu/index.php
February 11, 2014, 12:21:18 AM
So what's a good amount of MED to have? What do you guys all have? Can we buy or sell it places? sorry, i don't know much about this coin but seems cool.
February 10, 2014, 10:35:50 PM
i downloaded bfgminer gen2, im using 2 block erupters on windows 32. the problem is the very low shares acepted, 1 or 2 shares every 5 min. what could be the problem?
If u have low reject rate, i think the problem is the DIFF of pool.
Post ur conf.
bfgminer -o pool -u myworker -p my_pass -S all -Q 0
http://i58.tinypic.com/11rx3yh.jpg
February 10, 2014, 10:24:31 PM
i downloaded bfgminer gen2, im using 2 block erupters on windows 32. the problem is the very low shares acepted, 1 or 2 shares every 5 min. what could be the problem?
If u have low reject rate, i think the problem is the DIFF of pool.
Post ur conf.
February 10, 2014, 10:10:42 PM
i downloaded bfgminer gen2, im using 2 block erupters on windows 32. the problem is the very low shares acepted, 1 or 2 shares every 5 min. what could be the problem?
February 10, 2014, 09:37:46 PM
You also might try mcxnow. They recently added Max coin due to all the hype and had issues, but I like their interface and all the transfers are really fast. I think they have fixed their previous issues due to the big Max launch too.
Do not deal with anything that has to do with RealSolid (mcxnow included), guy is scammer or at least very untrustworthy person!
You guys playing on his exchange or dealing with him are asking for troubles and I do not doubt you will get them, sooner or later.
Anyway, what is exchange rate for MED? I'm looking to buy USB Erupter for MED but not sure if 700 MED is the right price, any help?
I asked guys selling those devices for MED what colors are available so here it goes, a picture showing all colors available right now.
Faucet is not working, I can't recall when it was last time I received some MED. For at least few weeks all I got was "result: null"
February 10, 2014, 09:11:10 PM
Purchased some Block erupters from the http://ibipot.com/ pool. Pool owner sent me a tracking number 7 hours later. Very nice!
Nice, gotta get that hash rate up
Let me know when they arrive I was considering also purchasing some
will be getting mine in the next couple of days...ordered last week from him...will let everyone know
on another note will anyone sell me a jally for some MED?
February 10, 2014, 08:03:37 PM
Picked up a jally just to dig some MED! Lets do this
What's the going rate for these?
February 10, 2014, 08:02:54 PM
done.
thx you for the link
greetings
thx you for the link
greetings
What soft combination use for mining?
February 10, 2014, 07:52:46 PM
done.
thx you for the link
greetings
thx you for the link
greetings
February 10, 2014, 06:21:05 PM
hey
i've setup a small p2pool node right here :
http://62.210.172.50:9375/
if anyone would like to try, fee is 1%
nite guys
i've setup a small p2pool node right here :
http://62.210.172.50:9375/
if anyone would like to try, fee is 1%
nite guys
will try
next time you restart try this https://github.com/hardcpp/P2PoolExtendedFrontEnd
look much better
Jump to: