Topic: [ANN] Signatum - New Algorithm - Fair Launch - No Premine - page 448. (Read 823858 times)
Sigt prices don't go up. The official website has not been updated yet.
does anyone have stability problem with palgin?
even at -i 20 my rigs still stops :/ (1060 and 980ti)
even at -i 20 my rigs still stops :/ (1060 and 980ti)
Streebog algo doesn't like too much OC, that's the thing I suppose.
P.S. : Ubuntu binary nearly compiled, will add to github soon.
i had one rig with which the miner stop but the 1060 had no core oc (oc one the memory though)
Strange, I have 10 1060_3Gbx6 rigs running stable from yesterday's release till now. I prefer intensity 22, hard-coded default is 21.
what is your frequencies on the 1060? no oc at all?
thx
+30 core only on some rigs.
Will check Ubuntu build. I'm not kinda Linux guy, so it can have problems.
UPD: Updated Windows bins, should be more stable, also little speedup for 1060's.
Sweet! Will download right away
does anyone have stability problem with palgin?
even at -i 20 my rigs still stops :/ (1060 and 980ti)
even at -i 20 my rigs still stops :/ (1060 and 980ti)
Streebog algo doesn't like too much OC, that's the thing I suppose.
P.S. : Ubuntu binary nearly compiled, will add to github soon.
i had one rig with which the miner stop but the 1060 had no core oc (oc one the memory though)
Strange, I have 10 1060_3Gbx6 rigs running stable from yesterday's release till now. I prefer intensity 22, hard-coded default is 21.
what is your frequencies on the 1060? no oc at all?
thx
+30 core only on some rigs.
Will check Ubuntu build. I'm not kinda Linux guy, so it can have problems.
UPD: Updated Windows bins, should be more stable, also little speedup for 1060's.
Ubuntu binary:
https://github.com/palginpav/ccminer/releases/download/skunk-1/ccminer-1.0-skunk.tar.gz
WARNING: compiled on VM, haven't tested, testers with Ubuntu needed
P.S: don't look at size, it's still static-linkage thing
https://github.com/palginpav/ccminer/releases/download/skunk-1/ccminer-1.0-skunk.tar.gz
WARNING: compiled on VM, haven't tested, testers with Ubuntu needed
P.S: don't look at size, it's still static-linkage thing
Running ubuntu 16.04
getting this error:
*** ccminer alexis-1.0 palgin skunkmod for nVidia GPUs from alexis78@github ***
*** Built with the nVidia CUDA Toolkit 8.0 (Not recommended prefer 7.5)
*** Based on tpruvot@github ccminer
*** Originally based on Christian Buchner and Christian H. project
*** Include some of the work of djm34, sp, tsiv and klausT.
*** Skunk algo modded by palgin
Illegal instruction (core dumped)
I have the G3900.
I'm downloading the source from palgin github and compiling it now. Will try if that works.
trupvot ccminer works but hash for 1070 is 18mh/s.
Hope I could get palgin's ccminer to work.
palgin says don't compile, the sigt codes are not in the repostory.
I see, no wonder compiling didn't work
got this error while building ccminer.cpp:(.text+0x7b75): undefined reference to `scanhash_timetravel10'
does anyone have stability problem with palgin?
even at -i 20 my rigs still stops :/ (1060 and 980ti)
even at -i 20 my rigs still stops :/ (1060 and 980ti)
Streebog algo doesn't like too much OC, that's the thing I suppose.
P.S. : Ubuntu binary nearly compiled, will add to github soon.
i had one rig with which the miner stop but the 1060 had no core oc (oc one the memory though)
Strange, I have 10 1060_3Gbx6 rigs running stable from yesterday's release till now. I prefer intensity 22, hard-coded default is 21.
what is your frequencies on the 1060? no oc at all?
thx
I had also stability problems with my rig using palgin's ccminer. My cards was little bit OC-ed, but now resetting to default and change tdp to from 100% to 85% its working fine. I have Asus Strix GTX 1060 OC. Intensity is 22. 18.4-18.5 MH/s for every card. Thanks palgin!
Ubuntu binary:
https://github.com/palginpav/ccminer/releases/download/skunk-1/ccminer-1.0-skunk.tar.gz
WARNING: compiled on VM, haven't tested, testers with Ubuntu needed
P.S: don't look at size, it's still static-linkage thing
https://github.com/palginpav/ccminer/releases/download/skunk-1/ccminer-1.0-skunk.tar.gz
WARNING: compiled on VM, haven't tested, testers with Ubuntu needed
P.S: don't look at size, it's still static-linkage thing
Running ubuntu 16.04
getting this error:
*** ccminer alexis-1.0 palgin skunkmod for nVidia GPUs from alexis78@github ***
*** Built with the nVidia CUDA Toolkit 8.0 (Not recommended prefer 7.5)
*** Based on tpruvot@github ccminer
*** Originally based on Christian Buchner and Christian H. project
*** Include some of the work of djm34, sp, tsiv and klausT.
*** Skunk algo modded by palgin
Illegal instruction (core dumped)
I have the G3900.
I'm downloading the source from palgin github and compiling it now. Will try if that works.
trupvot ccminer works but hash for 1070 is 18mh/s.
Hope I could get palgin's ccminer to work.
palgin says don't compile, the sigt codes are not in the repostory.
1060 6G - 19.38 M/hash.
Ubuntu binary:
https://github.com/palginpav/ccminer/releases/download/skunk-1/ccminer-1.0-skunk.tar.gz
WARNING: compiled on VM, haven't tested, testers with Ubuntu needed
P.S: don't look at size, it's still static-linkage thing
https://github.com/palginpav/ccminer/releases/download/skunk-1/ccminer-1.0-skunk.tar.gz
WARNING: compiled on VM, haven't tested, testers with Ubuntu needed
P.S: don't look at size, it's still static-linkage thing
Running ubuntu 16.04
getting this error:
*** ccminer alexis-1.0 palgin skunkmod for nVidia GPUs from alexis78@github ***
*** Built with the nVidia CUDA Toolkit 8.0 (Not recommended prefer 7.5)
*** Based on tpruvot@github ccminer
*** Originally based on Christian Buchner and Christian H. project
*** Include some of the work of djm34, sp, tsiv and klausT.
*** Skunk algo modded by palgin
Illegal instruction (core dumped)
I have the G3900.
I'm downloading the source from palgin github and compiling it now. Will try if that works.
trupvot ccminer works but hash for 1070 is 18mh/s.
Hope I could get palgin's ccminer to work.
does anyone have stability problem with palgin?
even at -i 20 my rigs still stops :/ (1060 and 980ti)
even at -i 20 my rigs still stops :/ (1060 and 980ti)
Streebog algo doesn't like too much OC, that's the thing I suppose.
P.S. : Ubuntu binary nearly compiled, will add to github soon.
i had one rig with which the miner stop but the 1060 had no core oc (oc one the memory though)
Strange, I have 10 1060_3Gbx6 rigs running stable from yesterday's release till now. I prefer intensity 22, hard-coded default is 21.
what is your frequencies on the 1060? no oc at all?
thx
Ubuntu binary:
https://github.com/palginpav/ccminer/releases/download/skunk-1/ccminer-1.0-skunk.tar.gz
WARNING: compiled on VM, haven't tested, testers with Ubuntu needed
P.S: don't look at size, it's still static-linkage thing
https://github.com/palginpav/ccminer/releases/download/skunk-1/ccminer-1.0-skunk.tar.gz
WARNING: compiled on VM, haven't tested, testers with Ubuntu needed
P.S: don't look at size, it's still static-linkage thing
Running ubuntu 16.04
getting this error:
*** ccminer alexis-1.0 palgin skunkmod for nVidia GPUs from alexis78@github ***
*** Built with the nVidia CUDA Toolkit 8.0 (Not recommended prefer 7.5)
*** Based on tpruvot@github ccminer
*** Originally based on Christian Buchner and Christian H. project
*** Include some of the work of djm34, sp, tsiv and klausT.
*** Skunk algo modded by palgin
Illegal instruction (core dumped)
Ubuntu binary:
https://github.com/palginpav/ccminer/releases/download/skunk-1/ccminer-1.0-skunk.tar.gz
WARNING: compiled on VM, haven't tested, testers with Ubuntu needed
P.S: don't look at size, it's still static-linkage thing
https://github.com/palginpav/ccminer/releases/download/skunk-1/ccminer-1.0-skunk.tar.gz
WARNING: compiled on VM, haven't tested, testers with Ubuntu needed
P.S: don't look at size, it's still static-linkage thing
Running ubuntu 16.04
getting this error:
*** ccminer alexis-1.0 palgin skunkmod for nVidia GPUs from alexis78@github ***
*** Built with the nVidia CUDA Toolkit 8.0 (Not recommended prefer 7.5)
*** Based on tpruvot@github ccminer
*** Originally based on Christian Buchner and Christian H. project
*** Include some of the work of djm34, sp, tsiv and klausT.
*** Skunk algo modded by palgin
Illegal instruction (core dumped)
Best coin ever! Lets pump Signatum to $1 
Hi!
15.60 MH/s with a GTX 1070 is OK?
Thanks a lot!!
15.60 MH/s with a GTX 1070 is OK?
Thanks a lot!!
I think 1070 should give you 20~25 MH/s
Try my miner instead, seems you're using tpruvot's version from the first page, for that miner speed is fair for 1070. With my version you'll get something around 26 MH, haven't tested on 1070's . Link's in this post.
Thanks, my gtx 1070 around 25-26 MH.
Thanks, my gtx 1070 around 25-26 MH.
can u give the link of the ccminer? thats not Sp mod right? thats free?
https://github.com/palginpav/ccminer/releases/download/skunk-1/ccminer-1.0-skunk.zip
It's free yes.
I get an error :
missing vcruntime140.dll I have try to add it but doesn't work !
I'm using windows 10 64 bit
with original one it works perfectly !
I suppose you added 64bit library.
Find and use 32bit .dll.
Both will have same name for fun, watch to not use one in folder like x64
I found mine in some Blizzard game folder :-)
Understood, Thanks!
a rx480 faz apenas 17mh
Is it possible to do more?
a rx480 faz apenas 17mh
Is it possible to do more?
Seems like a fair speed for 480.
How to run rx480 and 1070 on the same system??
add this to batch --gpu-platform 0,1,2 etc choose which platform ( between 0,1,2,3)
It is not clear to me
English is not my native language.
This is my line.
ccminer -a skunk -o stratum+tcp://sigt.suprnova.cc:7106 -u TEST.TEST -p PASSWORD123 --cpu-priority=3 -i 22
pause
It would be like this??
ccminer -a skunk --gpu-platform 0,1 -o stratum+tcp://sigt.suprnova.cc:7106 -u ThiiOWNED.ThiiOWNED -p senha123 --cpu-priority=3 -i 22
pause
??
No, you need to choose gpu platform in sgminer only. So, you need to run 2 miners simultaneously, sgminer for AMD cards, ccminer for Nvidia cards.
Understood, Thanks!
a rx480 faz apenas 17mh
Is it possible to do more?
How to run rx480 and 1070 on the same system??
add this to batch --gpu-platform 0,1,2 etc choose which platform ( between 0,1,2,3)
It is not clear to me
English is not my native language.
This is my line.
ccminer -a skunk -o stratum+tcp://sigt.suprnova.cc:7106 -u TEST.TEST -p PASSWORD123 --cpu-priority=3 -i 22
pause
It would be like this??
ccminer -a skunk --gpu-platform 0,1 -o stratum+tcp://sigt.suprnova.cc:7106 -u ThiiOWNED.ThiiOWNED -p senha123 --cpu-priority=3 -i 22
pause
??
No, you need to choose gpu platform in sgminer only. So, you need to run 2 miners simultaneously, sgminer for AMD cards, ccminer for Nvidia cards.
81 pages in 1 week, impressive
that righ, signatum is very hot, i think the price will go to 100ksat
81 pages in 1 week, impressive
How to run rx480 and 1070 on the same system??
add this to batch --gpu-platform 0,1,2 etc choose which platform ( between 0,1,2,3)
It is not clear to me
English is not my native language.
This is my line.
ccminer -a skunk -o stratum+tcp://sigt.suprnova.cc:7106 -u TEST.TEST -p PASSWORD123 --cpu-priority=3 -i 22
pause
It would be like this??
ccminer -a skunk --gpu-platform 0,1 -o stratum+tcp://sigt.suprnova.cc:7106 -u ThiiOWNED.ThiiOWNED -p senha123 --cpu-priority=3 -i 22
pause
??
No, you need to choose gpu platform in sgminer only. So, you need to run 2 miners simultaneously, sgminer for AMD cards, ccminer for Nvidia cards.
Jump to: