If you need help with masternodes I can help you out via TeamViewer / No Stealing since I am a reputable person .
Ofc for a small fee.
https://www.bitrated.com/SpiryX
Send me a PM .
Topic: [ANN] SLING | Fully Working DECENTRALIZED MARKET in Wallet | SLING MARKET LIVE - page 133. (Read 178780 times)
April 26, 2015, 12:34:52 PM
April 26, 2015, 12:28:29 PM
*Warning Nub Alert*
...but isn't that what people want? Us nubs to put more coin in this coin?
I hope so, simple questions for the VPS setup I would really appreciate any help with and will pay for someone's time. I was able to figure out missing dependencies from a post in this thread, tyvm, have slingd running on an ubuntu system with sling.conf in the folder it was looking in. When I was trying to get this working yesterday I already sent the 7331 tot he address in the node setup screen, but whenever I start the slingqt and try to start the node I get:
"could not allocate vin for collateralAddress" and I have googled this in every search term and way I can think of, no luck.
I have a machine on my network running ubuntu and I had already setup the node on my test wallet PC running the windows qt client.
My sling.conf on my ubuntu machine is EXACTLY like this but the only changes I made is where it states to do so. I did not change the
rpcallow ip since it does not state to do so. I put the user and pass from the sling.conf I was using on the win qt machine
rpcallowip=127.0.0.1
rpcuser=REPLACEME
rpcpassword=REPLACEME
server=1
listen=1
port=REPLACEMEWITHYOURPORT
masternode=1
masternodeaddr=MY PUBLIC IP:PORT
masternodeprivkey=MY KEY GENERATED BY THE QT RUNNING ON MY WIN MACHINE
On the ubuntu machine the slingd just sits without any activity. I assume it is running. Any way I can check? But if it isn't showing up in the QT wallet as running, it really isn't right?
I've tried completely deleting the sling.conf on the windows qt machine and I've tried entering everything I can think would be useful. I've setup a trigger for the port specified above in port=
I checked the network interface information and it shows 127.0.0.1 with a type of loopback, and it also shows the IP address of that machine. Not my public address and port like I put in the conf on that system, but I expected it to use my public IP to hit the VPS. I dont think the collateral address has anything to do with anything on my ubuntu system anyway does it?
Maybe I need to try setting the node up again, but I figured it would want me to use a different address to deposit the 7331 sling and then I would miss out on the little bit of regular staking I was starting to get again from the regular QT side.
I was telling a guy who was hitting me back with some of the basics that maybe this one isn't for me, I might need to move over to something with a little more help for nubs like shadow or something, so if I can't pay someone or get it going somehow please pm me with any offers for 8k. I will hold on to a little just in case something pops but the timing worked out well for me on this coin and while I am definitely not making any money since I rented all my hash and didnt sell a coin I will still hold a couple hundred for good luck.
Thanks if anyone can help and again I expect to pay people for their time if anyone can help out. BTW I am prepared to get a proper VPS an do not have an issue paying for a decent one, but I think I need to get it working on my local machines and figure out whatsup before I started paying for VPS.
...but isn't that what people want? Us nubs to put more coin in this coin?
I hope so, simple questions for the VPS setup I would really appreciate any help with and will pay for someone's time. I was able to figure out missing dependencies from a post in this thread, tyvm, have slingd running on an ubuntu system with sling.conf in the folder it was looking in. When I was trying to get this working yesterday I already sent the 7331 tot he address in the node setup screen, but whenever I start the slingqt and try to start the node I get:
"could not allocate vin for collateralAddress" and I have googled this in every search term and way I can think of, no luck.
I have a machine on my network running ubuntu and I had already setup the node on my test wallet PC running the windows qt client.
My sling.conf on my ubuntu machine is EXACTLY like this but the only changes I made is where it states to do so. I did not change the
rpcallow ip since it does not state to do so. I put the user and pass from the sling.conf I was using on the win qt machine
rpcallowip=127.0.0.1
rpcuser=REPLACEME
rpcpassword=REPLACEME
server=1
listen=1
port=REPLACEMEWITHYOURPORT
masternode=1
masternodeaddr=MY PUBLIC IP:PORT
masternodeprivkey=MY KEY GENERATED BY THE QT RUNNING ON MY WIN MACHINE
On the ubuntu machine the slingd just sits without any activity. I assume it is running. Any way I can check? But if it isn't showing up in the QT wallet as running, it really isn't right?
I've tried completely deleting the sling.conf on the windows qt machine and I've tried entering everything I can think would be useful. I've setup a trigger for the port specified above in port=
I checked the network interface information and it shows 127.0.0.1 with a type of loopback, and it also shows the IP address of that machine. Not my public address and port like I put in the conf on that system, but I expected it to use my public IP to hit the VPS. I dont think the collateral address has anything to do with anything on my ubuntu system anyway does it?
Maybe I need to try setting the node up again, but I figured it would want me to use a different address to deposit the 7331 sling and then I would miss out on the little bit of regular staking I was starting to get again from the regular QT side.
I was telling a guy who was hitting me back with some of the basics that maybe this one isn't for me, I might need to move over to something with a little more help for nubs like shadow or something, so if I can't pay someone or get it going somehow please pm me with any offers for 8k. I will hold on to a little just in case something pops but the timing worked out well for me on this coin and while I am definitely not making any money since I rented all my hash and didnt sell a coin I will still hold a couple hundred for good luck.
Thanks if anyone can help and again I expect to pay people for their time if anyone can help out. BTW I am prepared to get a proper VPS an do not have an issue paying for a decent one, but I think I need to get it working on my local machines and figure out whatsup before I started paying for VPS.
Ok i am coming along now.. i get the same issue could not allocate vin for collateralAddress
so the VPS is set i have address the wallet is unlock the only thing is i havent sent the 7331 yet
What must i do in orde to make this working.. i work command line all the way:)
April 26, 2015, 12:20:45 PM
Understood, so when I left my wallet unlocked are those stake amounts and I need to resend the 7331 again?
Or, should I simply lock the wallet now?
The payouts are only coming from the address assigned by the masternode setup.
When I list the masternodes, mine is the only one showing up
Or, should I simply lock the wallet now?
The payouts are only coming from the address assigned by the masternode setup.
When I list the masternodes, mine is the only one showing up
April 26, 2015, 12:08:55 PM
When I was trying to get this working yesterday I already sent the 7331 tot he address in the node setup screen, but whenever I start the slingqt and try to start the node I get:
"could not allocate vin for collateralAddress" and I have googled this in every search term and way I can think of, no luck.
"could not allocate vin for collateralAddress" and I have googled this in every search term and way I can think of, no luck.
If your cold wallet is locked, unlock it and see if that works.
That did get by the error, so the cold wallet must be unlocked always?
Or, can it be unlocked for staking only?
I did get my first couple of payouts from the node I think, or they were stakes because the wallet was unlocked heh, and I thank the gentleman who answered PMs this morning to help me get some things set straight, but I still thought I could lock it after starting the masternode...
My "stake" amounts are .8913333x
Is this because they are staking, or masternode payouts?
It would seem to me from staking since they are consistent, but I have staking=0 in my cold wallet sling.conf, although I am running the wallet unlocked currently. Don't hack the nub guys, I'll give you the coins
If I check the weight in the inputs area, I have other addresses with much higher coin age, so maybe it is working...
Once I learn these things, I am going to make a readme to help us nubs.
April 26, 2015, 10:50:19 AM
When I was trying to get this working yesterday I already sent the 7331 tot he address in the node setup screen, but whenever I start the slingqt and try to start the node I get:
"could not allocate vin for collateralAddress" and I have googled this in every search term and way I can think of, no luck.
"could not allocate vin for collateralAddress" and I have googled this in every search term and way I can think of, no luck.
If your cold wallet is locked, unlock it and see if that works.
That did get by the error, so the cold wallet must be unlocked always?
Or, can it be unlocked for staking only?
I did get my first couple of payouts from the node I think, or they were stakes because the wallet was unlocked heh, and I thank the gentleman who answered PMs this morning to help me get some things set straight, but I still thought I could lock it after starting the masternode...
My "stake" amounts are .8913333x
Is this because they are staking, or masternode payouts?
It would seem to me from staking since they are consistent, but I have staking=0 in my cold wallet sling.conf, although I am running the wallet unlocked currently. Don't hack the nub guys, I'll give you the coins
If I check the weight in the inputs area, I have other addresses with much higher coin age, so maybe it is working...
Once I learn these things, I am going to make a readme to help us nubs.
April 26, 2015, 10:42:44 AM
Swings are fun to play, many people think it'll pump more.
April 26, 2015, 10:39:44 AM
when hitting make -f makefile.unix i get following error why is this?
xx@xx:~/sling/src# make -f makefile.unix
g++ -c -O2 -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -DUSE_SECP256K1 -I/root/sling/src -I/root/sling/src/obj -DUSE_UPNP=0 -DENABLE_WALLET -I/root/sling/src/leveldb/include -I/root/sling/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/alert.d -o obj/alert.o alert.cpp
In file included from alert.h:9:0,
from alert.cpp:5:
serialize.h:19:48: fatal error: boost/type_traits/is_fundamental.hpp: No such file or directory
#include
^
compilation terminated.
makefile.unix:201: recipe for target 'obj/alert.o' failed
make: *** [obj/alert.o] Error 1
Do you have all of the dependencies and stuff? You have libboost-all-dev? xx@xx:~/sling/src# make -f makefile.unix
g++ -c -O2 -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -DUSE_SECP256K1 -I/root/sling/src -I/root/sling/src/obj -DUSE_UPNP=0 -DENABLE_WALLET -I/root/sling/src/leveldb/include -I/root/sling/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/alert.d -o obj/alert.o alert.cpp
In file included from alert.h:9:0,
from alert.cpp:5:
serialize.h:19:48: fatal error: boost/type_traits/is_fundamental.hpp: No such file or directory
#include
^
compilation terminated.
makefile.unix:201: recipe for target 'obj/alert.o' failed
make: *** [obj/alert.o] Error 1
April 26, 2015, 08:55:54 AM
Thanks! it worked.
Devs should fix the repository...
Devs should fix the repository...
Getting errors trying to compile the daemon on linux.
I'm using GCC 4.9.2, boost 1.55, and tried with both libdb(++) 5.1 and 5.3.
Can anyone help?
I'm using GCC 4.9.2, boost 1.55, and tried with both libdb(++) 5.1 and 5.3.
Quote
/bin/sh ../share/genbuild.sh obj/build.h
g++ -c -O2 -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -DUSE_SECP256K1 -I/home/user/1/sling/src -I/home/user/1/sling/src/obj -DENABLE_WALLET -I/home/user/1/sling/src/leveldb/include -I/home/user/1/sling/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/crypto/hmac_sha256.d -o obj/crypto/hmac_sha256.o crypto/hmac_sha256.cpp
crypto/hmac_sha256.cpp:34:1: fatal error: opening dependency file obj/crypto/hmac_sha256.d: No such file or directory
}
^
compilation terminated.
makefile.unix:201: recipe for target 'obj/crypto/hmac_sha256.o' failed
make: *** [obj/crypto/hmac_sha256.o] Error 1
g++ -c -O2 -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -DUSE_SECP256K1 -I/home/user/1/sling/src -I/home/user/1/sling/src/obj -DENABLE_WALLET -I/home/user/1/sling/src/leveldb/include -I/home/user/1/sling/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/crypto/hmac_sha256.d -o obj/crypto/hmac_sha256.o crypto/hmac_sha256.cpp
crypto/hmac_sha256.cpp:34:1: fatal error: opening dependency file obj/crypto/hmac_sha256.d: No such file or directory
}
^
compilation terminated.
makefile.unix:201: recipe for target 'obj/crypto/hmac_sha256.o' failed
make: *** [obj/crypto/hmac_sha256.o] Error 1
Can anyone help?
Code:
git clone https://bitbucket.org/slingrepo/sling
cd sling
cd secp256k1
./autogen.sh
./configure
make
make install
cp /usr/local/lib/libsecp256k1.* /usr/lib
cd ..
cd src
mkdir obj
cp crypto obj/crypto -rR
make -f makefile.unix
sudo cp slingd /usr/bin
cd ../..
cd sling
cd secp256k1
./autogen.sh
./configure
make
make install
cp /usr/local/lib/libsecp256k1.* /usr/lib
cd ..
cd src
mkdir obj
cp crypto obj/crypto -rR
make -f makefile.unix
sudo cp slingd /usr/bin
cd ../..
when hitting make -f makefile.unix i get following error why is this?
xx@xx:~/sling/src# make -f makefile.unix
g++ -c -O2 -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -DUSE_SECP256K1 -I/root/sling/src -I/root/sling/src/obj -DUSE_UPNP=0 -DENABLE_WALLET -I/root/sling/src/leveldb/include -I/root/sling/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/alert.d -o obj/alert.o alert.cpp
In file included from alert.h:9:0,
from alert.cpp:5:
serialize.h:19:48: fatal error: boost/type_traits/is_fundamental.hpp: No such file or directory
#include
^
compilation terminated.
makefile.unix:201: recipe for target 'obj/alert.o' failed
make: *** [obj/alert.o] Error 1
April 26, 2015, 05:18:44 AM
When I was trying to get this working yesterday I already sent the 7331 tot he address in the node setup screen, but whenever I start the slingqt and try to start the node I get:
"could not allocate vin for collateralAddress" and I have googled this in every search term and way I can think of, no luck.
"could not allocate vin for collateralAddress" and I have googled this in every search term and way I can think of, no luck.
If your cold wallet is locked, unlock it and see if that works.
April 26, 2015, 04:10:25 AM
Dead? Already poor thing . 
no just a good shake out
to get the last of the cheap coins ... so thank you for those Oh , right ? I dono what to say about that
) you won't fool me . April 26, 2015, 03:35:26 AM
Dead? Already poor thing .
no just a good shake out
to get the last of the cheap coins ... so thank you for those April 26, 2015, 03:20:35 AM
Dead? Already poor thing .
April 26, 2015, 02:13:07 AM
*Warning Nub Alert*
...but isn't that what people want? Us nubs to put more coin in this coin?
I hope so, simple questions for the VPS setup I would really appreciate any help with and will pay for someone's time. I was able to figure out missing dependencies from a post in this thread, tyvm, have slingd running on an ubuntu system with sling.conf in the folder it was looking in. When I was trying to get this working yesterday I already sent the 7331 tot he address in the node setup screen, but whenever I start the slingqt and try to start the node I get:
"could not allocate vin for collateralAddress" and I have googled this in every search term and way I can think of, no luck.
I have a machine on my network running ubuntu and I had already setup the node on my test wallet PC running the windows qt client.
My sling.conf on my ubuntu machine is EXACTLY like this but the only changes I made is where it states to do so. I did not change the
rpcallow ip since it does not state to do so. I put the user and pass from the sling.conf I was using on the win qt machine
rpcallowip=127.0.0.1
rpcuser=REPLACEME
rpcpassword=REPLACEME
server=1
listen=1
port=REPLACEMEWITHYOURPORT
masternode=1
masternodeaddr=MY PUBLIC IP:PORT
masternodeprivkey=MY KEY GENERATED BY THE QT RUNNING ON MY WIN MACHINE
On the ubuntu machine the slingd just sits without any activity. I assume it is running. Any way I can check? But if it isn't showing up in the QT wallet as running, it really isn't right?
I've tried completely deleting the sling.conf on the windows qt machine and I've tried entering everything I can think would be useful. I've setup a trigger for the port specified above in port=
I checked the network interface information and it shows 127.0.0.1 with a type of loopback, and it also shows the IP address of that machine. Not my public address and port like I put in the conf on that system, but I expected it to use my public IP to hit the VPS. I dont think the collateral address has anything to do with anything on my ubuntu system anyway does it?
Maybe I need to try setting the node up again, but I figured it would want me to use a different address to deposit the 7331 sling and then I would miss out on the little bit of regular staking I was starting to get again from the regular QT side.
I was telling a guy who was hitting me back with some of the basics that maybe this one isn't for me, I might need to move over to something with a little more help for nubs like shadow or something, so if I can't pay someone or get it going somehow please pm me with any offers for 8k. I will hold on to a little just in case something pops but the timing worked out well for me on this coin and while I am definitely not making any money since I rented all my hash and didnt sell a coin I will still hold a couple hundred for good luck.
Thanks if anyone can help and again I expect to pay people for their time if anyone can help out. BTW I am prepared to get a proper VPS an do not have an issue paying for a decent one, but I think I need to get it working on my local machines and figure out whatsup before I started paying for VPS.
...but isn't that what people want? Us nubs to put more coin in this coin?
I hope so, simple questions for the VPS setup I would really appreciate any help with and will pay for someone's time. I was able to figure out missing dependencies from a post in this thread, tyvm, have slingd running on an ubuntu system with sling.conf in the folder it was looking in. When I was trying to get this working yesterday I already sent the 7331 tot he address in the node setup screen, but whenever I start the slingqt and try to start the node I get:
"could not allocate vin for collateralAddress" and I have googled this in every search term and way I can think of, no luck.
I have a machine on my network running ubuntu and I had already setup the node on my test wallet PC running the windows qt client.
My sling.conf on my ubuntu machine is EXACTLY like this but the only changes I made is where it states to do so. I did not change the
rpcallow ip since it does not state to do so. I put the user and pass from the sling.conf I was using on the win qt machine
rpcallowip=127.0.0.1
rpcuser=REPLACEME
rpcpassword=REPLACEME
server=1
listen=1
port=REPLACEMEWITHYOURPORT
masternode=1
masternodeaddr=MY PUBLIC IP:PORT
masternodeprivkey=MY KEY GENERATED BY THE QT RUNNING ON MY WIN MACHINE
On the ubuntu machine the slingd just sits without any activity. I assume it is running. Any way I can check? But if it isn't showing up in the QT wallet as running, it really isn't right?
I've tried completely deleting the sling.conf on the windows qt machine and I've tried entering everything I can think would be useful. I've setup a trigger for the port specified above in port=
I checked the network interface information and it shows 127.0.0.1 with a type of loopback, and it also shows the IP address of that machine. Not my public address and port like I put in the conf on that system, but I expected it to use my public IP to hit the VPS. I dont think the collateral address has anything to do with anything on my ubuntu system anyway does it?
Maybe I need to try setting the node up again, but I figured it would want me to use a different address to deposit the 7331 sling and then I would miss out on the little bit of regular staking I was starting to get again from the regular QT side.
I was telling a guy who was hitting me back with some of the basics that maybe this one isn't for me, I might need to move over to something with a little more help for nubs like shadow or something, so if I can't pay someone or get it going somehow please pm me with any offers for 8k. I will hold on to a little just in case something pops but the timing worked out well for me on this coin and while I am definitely not making any money since I rented all my hash and didnt sell a coin I will still hold a couple hundred for good luck.
Thanks if anyone can help and again I expect to pay people for their time if anyone can help out. BTW I am prepared to get a proper VPS an do not have an issue paying for a decent one, but I think I need to get it working on my local machines and figure out whatsup before I started paying for VPS.
April 25, 2015, 08:04:14 PM
price is picking up!! soon its going to be hard to get these low prices before monday road map!
April 25, 2015, 07:58:14 PM
Having an issue with the wallet. If I close it then try to reopen it says...... Cant obtain lock on directory..... sling is probably already running. I have to actually restart my computer to get it to open again.
Any ideas?
I noticed when you close the wallet sometimes the icon stays in the system tray for like a minute. You probably just have to wait for it to finish doing whatever its doing and the icon to go away before you run it again.Any ideas?
I've noticed that too. It stays running in the background for awhile, but you can always force close it with the task manager with ctr + alt + delete.
April 25, 2015, 07:31:17 PM
Oh crap. My sell order for about 45k sats was called in. Looks like I parachuted too early. Bye all, sling was good to me.
could be better if you would hold on longer
things are just getting started I'll catch a few if and when the next dip comes. Not going to chase after the rainbow right now.
April 25, 2015, 07:24:14 PM
Oh crap. My sell order for about 45k sats was called in. Looks like I parachuted too early. Bye all, sling was good to me.
could be better if you would hold on longer
things are just getting started 
April 25, 2015, 07:20:23 PM
ok thanks will try that. Just want to make sure I got it working right before I send my coins.
EDIT: Yep that worked.. Thanks
EDIT: Yep that worked.. Thanks
April 25, 2015, 07:19:30 PM
Having an issue with the wallet. If I close it then try to reopen it says...... Cant obtain lock on directory..... sling is probably already running. I have to actually restart my computer to get it to open again.
Any ideas?
I noticed when you close the wallet sometimes the icon stays in the system tray for like a minute. You probably just have to wait for it to finish doing whatever its doing and the icon to go away before you run it again. Any ideas?
April 25, 2015, 07:17:57 PM
Having an issue with the wallet. If I close it then try to reopen it says...... Cant obtain lock on directory data..... sling is probably already running. I have to actually restart my computer to get it to open again.
Any ideas?
Any ideas?
Jump to: