Topic: [ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin - page 4. (Read 515713 times)
June 26, 2014, 06:12:17 AM
FYI: anybody following sph-sgminer should switch to this thread: https://bitcointalksearch.org/topic/ann-sgminer-v5-optimized-x11x13neoscryptlyra2reetc-kernel-switch-miner-632503 ... sph-sgminer is not being developed any more and has been merged into sgminer_v5 (with optimized X11,X13,nist5 alogs).
June 21, 2014, 04:28:23 AM
Here is my settings for r9 270 dual-x oc card
I mine dark coin
I have 4 x r9 270 and 8 gb ram
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0E
sgminer.exe -k x11mod -w 128 -g 2 --intensity 16 --lookup-gap 2 --thread-concurrency 0 --no-submit-stale
I got 1850 Mh/s avg.
It works with intensity 15 too.
I mine dark coin
I have 4 x r9 270 and 8 gb ram
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0E
sgminer.exe -k x11mod -w 128 -g 2 --intensity 16 --lookup-gap 2 --thread-concurrency 0 --no-submit-stale
I got 1850 Mh/s avg.
It works with intensity 15 too.
June 17, 2014, 09:22:51 AM
how much btc day a day you guys pulling in? :0P
June 16, 2014, 02:50:52 PM
This is a great miner for altcoins, I am getting good speeds on MYR and GRS with this one.. 
June 15, 2014, 12:43:46 AM
how to set para for amd HD 6750
June 14, 2014, 02:56:38 PM
Have a new version of the chicken blood?
June 14, 2014, 02:14:07 PM
I can't mine at all even on a pool it keep saying
"waiting for work to be available from pools"
"waiting for work to be available from pools"
June 12, 2014, 03:50:11 AM
Hey guys, I'm having a issue where 1 of my GPU has low hashrate... though I feel like its going to SICK state but it's really stable.
- AMD 13.1mod drivers
- USB risers
- 8gb ram
Tried restarting, lowers or higher engine and memory clocks, different intensity etc... nothing helps.
I'll continue re-arranging the positions of the slot but last time still the same.
Is there something I miss?
Run a stress test on it and see the results. - AMD 13.1mod drivers
- USB risers
- 8gb ram
Tried restarting, lowers or higher engine and memory clocks, different intensity etc... nothing helps.
I'll continue re-arranging the positions of the slot but last time still the same.
Is there something I miss?
June 10, 2014, 06:20:31 AM
Hey guys, I'm having a issue where 1 of my GPU has low hashrate... though I feel like its going to SICK state but it's really stable.
- AMD 13.1mod drivers
- USB risers
- 8gb ram
Tried restarting, lowers or higher engine and memory clocks, different intensity etc... nothing helps.
I'll continue re-arranging the positions of the slot but last time still the same.
Is there something I miss?
- AMD 13.1mod drivers
- USB risers
- 8gb ram
Tried restarting, lowers or higher engine and memory clocks, different intensity etc... nothing helps.
I'll continue re-arranging the positions of the slot but last time still the same.
Is there something I miss?
June 09, 2014, 04:22:49 PM
I have been trying to get this working but whatever i do i see no accepted shares appear on pools
The miner shows 2.8 Mh being busy i notice hw errors, local shares going up, but the pools report 0.000000000 khash mined
I used 7 versions found and all the same nothing accepted in the miner or on the pool
The pow of the coin i was trying to mine is almost done and still no shares
The card a sapphire 7970, the commands i tried this far:
Have been trying 4 different x13 coins and all same result
sgminer -k marucoin (-o stratum+tcp://sum.suprnova.cc:port user settings ) -I19 -g 4 -w 128
sgminer -k x13mod and same settings
tried also -I 16 -g2 -w 256 or even tried changing the TC and shaders nothing changes
It looks like its hashing 2.4 to 2.9 Mh, but i get no accepted shares at all
At some pools the miner simply goes into idle mode reporting nothing todo
I noticed some of your posted settings have the wrong syntax. I highlighted them because you don't have a space between the letter and the number.The miner shows 2.8 Mh being busy i notice hw errors, local shares going up, but the pools report 0.000000000 khash mined
I used 7 versions found and all the same nothing accepted in the miner or on the pool
The pow of the coin i was trying to mine is almost done and still no shares
The card a sapphire 7970, the commands i tried this far:
Have been trying 4 different x13 coins and all same result
sgminer -k marucoin (-o stratum+tcp://sum.suprnova.cc:port user settings ) -I19 -g 4 -w 128
sgminer -k x13mod and same settings
tried also -I 16 -g2 -w 256 or even tried changing the TC and shaders nothing changes
It looks like its hashing 2.4 to 2.9 Mh, but i get no accepted shares at all
At some pools the miner simply goes into idle mode reporting nothing todo
Here are my 7970 settings that I've used on several X13 coins
sgminer -k x13mod -o stratum+tcp://boost2.suprnova.cc:3311 -u login credentials -p password -I 19 -g 4 -w 128
(I don't use gpu-clock or mem-clock settings in the bat file. I create a conf file and change settings from there) TC or shader settings are not needed for X13 and should be set to 0.
If these settings still produce the problems you mentioned then something else is wrong.
Hope this helps.
I can post my conf file if that would help.
June 09, 2014, 11:37:16 AM
older cards have to use -k x13modold
June 09, 2014, 11:22:33 AM
I have been trying to get this working but whatever i do i see no accepted shares appear on pools
The miner shows 2.8 Mh being busy i notice hw errors, local shares going up, but the pools report 0.000000000 khash mined
I used 7 versions found and all the same nothing accepted in the miner or on the pool
The pow of the coin i was trying to mine is almost done and still no shares
The card a sapphire 7970, the commands i tried this far:
Have been trying 4 different x13 coins and all same result
sgminer -k marucoin (-o stratum+tcp://sum.suprnova.cc:port user settings ) -I19 -g 4 -w 128
sgminer -k x13mod and same settings
tried also -I 16 -g2 -w 256 or even tried changing the TC and shaders nothing changes
It looks like its hashing 2.4 to 2.9 Mh, but i get no accepted shares at all
At some pools the miner simply goes into idle mode reporting nothing todo
The miner shows 2.8 Mh being busy i notice hw errors, local shares going up, but the pools report 0.000000000 khash mined
I used 7 versions found and all the same nothing accepted in the miner or on the pool
The pow of the coin i was trying to mine is almost done and still no shares
The card a sapphire 7970, the commands i tried this far:
Have been trying 4 different x13 coins and all same result
sgminer -k marucoin (-o stratum+tcp://sum.suprnova.cc:port user settings ) -I19 -g 4 -w 128
sgminer -k x13mod and same settings
tried also -I 16 -g2 -w 256 or even tried changing the TC and shaders nothing changes
It looks like its hashing 2.4 to 2.9 Mh, but i get no accepted shares at all
At some pools the miner simply goes into idle mode reporting nothing todo
June 09, 2014, 06:55:21 AM
talkcoin isn't added yet here?
I am pretty sure phm stopped working on this a while back 
June 08, 2014, 03:41:09 PM
talkcoin isn't added yet here?
June 06, 2014, 03:43:38 PM
I'm trying to test run the xll/mod miner and having no luck connecting 
was testing on cloak at dedicated with their stratum and worker etc everything looked good but everything ended up in the hv: and I wasn't seeing any "accepted"??
I'm just running a 6950 on windows lol I'm probably missing something pretty simple, any help ??
I was getting 1.3 m/h's out of my 6950 on a x11 coin... will the OG X11 miner work on AXIS
really want to get on it from start
was testing on cloak at dedicated with their stratum and worker etc everything looked good but everything ended up in the hv: and I wasn't seeing any "accepted"??I'm just running a 6950 on windows lol I'm probably missing something pretty simple, any help ??
I was getting 1.3 m/h's out of my 6950 on a x11 coin... will the OG X11 miner work on AXIS
really want to get on it from start
June 05, 2014, 04:32:19 PM
Guys,
Why i am not getting any accepted share in X13 (marucoin) ?
Why i am not getting any accepted share in X13 (marucoin) ?
June 03, 2014, 10:12:06 AM
I'm trying to use PHM's sph-sgminer. I'm trying to mine X11 coins using my R9 290s and I keep ending up with "Error: clSetKernelArg of all params failed."
June 03, 2014, 07:28:00 AM
Which kernel are you guys running to mine x13 coins with this specific software? Lasybear's does not work for my r9 270's (locks after an hour), but this version of sgminer runs perfectly fine.
this verison is not efficient at all
Right, but what's the alternative?
X13 seems to be really profitable right now.
there some guy getting like 1.7 i think, you should take a look at the x13mod thread
Yeah, thanks for the heads up. I'm trying the 14.4 drivers right now, to see if that works.
June 03, 2014, 07:27:14 AM
Which kernel are you guys running to mine x13 coins with this specific software? Lasybear's does not work for my r9 270's (locks after an hour), but this version of sgminer runs perfectly fine.
this verison is not efficient at all
Right, but what's the alternative?
X13 seems to be really profitable right now.
there are some guys getting like 1.7 i think, you should take a look at the x13mod thread
or try to install 14.4 plus the mod -g2 -I 13/ -I 18
other users have experienced some issues, then after a format their issue were gone
some times you are forced to do it...
June 03, 2014, 06:56:04 AM
Which kernel are you guys running to mine x13 coins with this specific software? Lasybear's does not work for my r9 270's (locks after an hour), but this version of sgminer runs perfectly fine.
this verison is not efficient at all
Right, but what's the alternative?
X13 seems to be really profitable right now.
Jump to: