[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 278.

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Within 1-2 days we'll reach to "shipping from stock" status.

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

The SP20 can be under-clocked to ~0.5 J/GH, depending on ~~cooling~~ ambient temperature and specific ASIC batch.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

I am getting really good numbers with lower :
watts 180
fan 40
volts .062
max volts .068

.55 watt per gh damn good

Temp Front / Back T,B

32 °C / 71,65 °C
Fan Speed
40
Start Voltage
0.62 / 0.62 / 0.62 / 0.62
Max Voltage
0.67
Max Watts
180 / 180 / 180 / 180

744 watts for 1350 gh = 0.552 watts per gh I am using an evga 1300 g2

notlist3d

legendary

Activity: 1456

Merit: 1000

Was not expecting it today. But nice surprise. Now need to test it and see how it does on speed

. If any of you find a great setting please share. Looks like your well on the way to finding one.

Ski72

member

Activity: 84

Merit: 10

Kinex - The New Frontier

Quote from: philipma1957 on November 24, 2014, 09:48:15 AM

okay my sp20 arrived fedex sent it early. woke me up and I answered the door half dressed. but this is not the story.

I open the box gear looks good. So I was wondering how do I set this up. I go to the site of sp-tech and do not see much for set up.

This thread is 450 pages so plain and simple were are the setup instructions's.

I do not mind starting a thread on setup with a ton of photos and links.

thanks for help

same here, received my SP20's - even my RMA unit (which I still have yet to ship the broken one back - that's good customer service!)
though I couldn't get to the door and have to go pick them up from the warehouse Undecided

being a quadriplegic sucks sometimes (well most all the time but ... gotta think positive!)
will put them next to my existing SP20's and see how they fair ...

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: philipma1957 on November 24, 2014, 09:48:15 AM

okay my sp20 arrived fedex sent it early. woke me up and I answered the door half dressed. but this is not the story.

I open the box gear looks good. So I was wondering how do I set this up. I go to the site of sp-tech and do not see much for set up.

This thread is 450 pages so plain and simple were are the setup instructions's.

I do not mind starting a thread on setup with a ton of photos and links.

thanks for help

Setup is a synch my seccond sp20 says Sp20E on the UI arrived today.

-You need too PSU's of around 750Watts each all you do is plugin the PCI-E cables ( I suggest user the same psu on the same 1,2 and 3,4)

-plug in the unit to your network and power up the PSU's. (remeber to do the cable trick green wire and black to power PSU withoute a motherboard DO NOT
user the ADD2PSU adapter on these)

-either use a port scanner to find the DHCP address assigned by your router or go to myminer.io to find all your Spoodoolies machines and just click on the link

-use the UI to add your pools and bam you are mining its that simple.

***Stuff on this new batch ****

This batch of sp20 seems better

i'm getting 1680 TH using .76 volts (max .79) at 1200 watts , i can tell these ones work harder since the heat generation is actually noticible. I've seen it run as high as 1760TH or so.

--
on a side note why does the voltage on each PCI slot range from .64- .80 while the max unit voltage is .79

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: philipma1957 on November 24, 2014, 09:48:15 AM

okay my sp20 arrived fedex sent it early. woke me up and I answered the door half dressed. but this is not the story.

I open the box gear looks good. So I was wondering how do I set this up. I go to the site of sp-tech and do not see much for set up.

This thread is 450 pages so plain and simple were are the setup instructions's.

I do not mind starting a thread on setup with a ton of photos and links.

thanks for help

SP20 Jackson Quick Start Guide

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: raskul on November 24, 2014, 11:19:54 AM

Quote from: philipma1957 on November 24, 2014, 11:17:56 AM

Quote from: raskul on November 24, 2014, 11:04:07 AM

is that a stable 1.4TH/s or just the initial spike-in?
that's pretty good if it holds stable.

ADD: get it off guild and mine like a man Tongue

I am waiting to switch to mmpool. I want to test at the guild.

I dropped power to this

Temp Front / Back T,B
31 °C / 71,67 °C
Fan Speed
40
Start Voltage
0.63 / 0.63 / 0.63 / 0.63
Max Voltage
0.69
Max Watts
190 / 190 / 190 / 190

and I am holding at 1394gh will report if it holds my k-watt numbers are about 700 I am almost doing .5 watts a gh !

If I hold up with these numbers I will be ordering more very soon.

SP-Tech. still holding up as the best miners on the market Grin

and i have a fetish for the noise they make... what is the SP20 like? have you got a dB meter handy?

I do have a meter . I will attempt to find it. oh I lowered settings again.

Temp Front / Back T,B

31 °C / 64,60 °C
Fan Speed
40
Start Voltage
0.62 / 0.62 / 0.62 / 0.62
Max Voltage
0.67
Max Watts
180 / 180 / 180 / 180

watt are

raskul

sr. member

Activity: 434

Merit: 250

Quote from: philipma1957 on November 24, 2014, 11:17:56 AM

Quote from: raskul on November 24, 2014, 11:04:07 AM

is that a stable 1.4TH/s or just the initial spike-in?
that's pretty good if it holds stable.

ADD: get it off guild and mine like a man Tongue

I am waiting to switch to mmpool. I want to test at the guild.

I dropped power to this

Temp Front / Back T,B
31 °C / 71,67 °C
Fan Speed
40
Start Voltage
0.63 / 0.63 / 0.63 / 0.63
Max Voltage
0.69
Max Watts
190 / 190 / 190 / 190

and I am holding at 1394gh will report if it holds my k-watt numbers are about 700 I am almost doing .5 watts a gh !

If I hold up with these numbers I will be ordering more very soon.

SP-Tech. still holding up as the best miners on the market Grin

and i have a fetish for the noise they make... what is the SP20 like? have you got a dB meter handy?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: raskul on November 24, 2014, 11:04:07 AM

is that a stable 1.4TH/s or just the initial spike-in?
that's pretty good if it holds stable.

ADD: get it off guild and mine like a man Tongue

I am waiting to switch to mmpool. I want to test at the guild.

I dropped power to this

Temp Front / Back T,B
31 °C / 71,67 °C
Fan Speed
40
Start Voltage
0.63 / 0.63 / 0.63 / 0.63
Max Voltage
0.69
Max Watts
190 / 190 / 190 / 190

and I am holding at 1394gh will report if it holds my k-watt numbers are about 700 I am almost doing .5 watts a gh !

If I hold up with these numbers I will be ordering more very soon.

mavericklm

hero member

Activity: 742

Merit: 500

There is a mistake on the sp20 page:

Size D 382mm; W 110mm; H 137 mm

Network Single 10/100 Ethernet port

Fans 1 X 120 mm

110mm wide but with a 120mm fan!

As a mod for better cooling or less decibels you can mod the top, at the front part, to use a 12cm extra fan!
Just take the panel off, make the round circle for 12fan, use some tool to cut the metal. Drill 4holes for fan fixing screws. Fix the fan with fan-guard on outside of the top cover. Power it from psu!
Part of the metal ''plate'' that the controller board is resting(also keeping the hashboards vertical) will need to be cut too!

Might work putting a fan on the left, front side too!

raskul

sr. member

Activity: 434

Merit: 250

is that a stable 1.4TH/s or just the initial spike-in?
that's pretty good if it holds stable.

ADD: get it off guild and mine like a man Tongue

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: raskul on November 24, 2014, 10:53:05 AM

Quote from: philipma1957 on November 24, 2014, 10:50:33 AM

Quote from: raskul on November 24, 2014, 10:18:12 AM

nice1 phil, be good to see your h/rate increase at mmpool.
meanwhile, i'm awaiting delivery of my own SP20... i'm gonna give it a full on photoshoot when it gets here Grin

I wanted to play with under clock under volt settings.

I am getting 1352 hash with 862 watts at the k-watt meter

settings below

Temp Front / Back T,B
31 °C / 48,47 °C
Fan Speed
40
Start Voltage
0.67 / 0.67 / 0.67 / 0.67
Max Voltage
0.73
Max Watts
200 / 200 / 200 / 200

I am using old firmware
right off the bat I can tell you they need to make a fan setting 30 for underclock people like myself.

biffa was right lowest setting is too loud . I will post more numbers with this I may lower volts to .65

not far off what I get with my under-clocked SP10's then. I'm running them at 833w and seeing ~1.2TH/s
(833w because that's the maximum I can have them at in the unit i have them in - getting the electric phase upgraded this week so i'll be back to turbo soon)

my second try is better 820 watts doing 1413 gh at the k-watt meter.

this means I can use a lessor psu

settings are:

Temp Front / Back T,B
31 °C / 74,68 °C
Fan Speed
40
Start Voltage
0.65 / 0.65 / 0.65 / 0.65
Max Voltage
0.71
Max Watts
195 / 195 / 195 / 195

raskul

sr. member

Activity: 434

Merit: 250

Quote from: philipma1957 on November 24, 2014, 10:50:33 AM

Quote from: raskul on November 24, 2014, 10:18:12 AM

nice1 phil, be good to see your h/rate increase at mmpool.
meanwhile, i'm awaiting delivery of my own SP20... i'm gonna give it a full on photoshoot when it gets here Grin

I wanted to play with under clock under volt settings.

I am getting 1352 hash with 862 watts at the k-watt meter

settings below

Temp Front / Back T,B
31 °C / 48,47 °C
Fan Speed
40
Start Voltage
0.67 / 0.67 / 0.67 / 0.67
Max Voltage
0.73
Max Watts
200 / 200 / 200 / 200

I am using old firmware
right off the bat I can tell you they need to make a fan setting 30 for underclock people like myself.

biffa was right lowest setting is too loud . I will post more numbers with this I may lower volts to .65

not far off what I get with my under-clocked SP10's then. I'm running them at 833w and seeing ~1.2TH/s
(833w because that's the maximum I can have them at in the unit i have them in - getting the electric phase upgraded this week so i'll be back to turbo soon)

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: raskul on November 24, 2014, 10:18:12 AM

nice1 phil, be good to see your h/rate increase at mmpool.
meanwhile, i'm awaiting delivery of my own SP20... i'm gonna give it a full on photoshoot when it gets here Grin

I wanted to play with under clock under volt settings.

I am getting 1352 hash with 862 watts at the k-watt meter

settings below

Temp Front / Back T,B
31 °C / 48,47 °C
Fan Speed
40
Start Voltage
0.67 / 0.67 / 0.67 / 0.67
Max Voltage
0.73
Max Watts
200 / 200 / 200 / 200

I am using old firmware
right off the bat I can tell you they need to make a fan setting 30 for underclock people like myself.

biffa was right lowest setting is too loud . I will post more numbers with this I may lower volts to .65
two fast under clock under volt settings

this setting below gives me .55 watts a gh

raskul

sr. member

Activity: 434

Merit: 250

nice1 phil, be good to see your h/rate increase at mmpool.
meanwhile, i'm awaiting delivery of my own SP20... i'm gonna give it a full on photoshoot when it gets here Grin

edgar

legendary

Activity: 1848

Merit: 1001

Quote from: philipma1957 on November 24, 2014, 09:48:15 AM

okay my sp20 arrived fedex sent it early. woke me up and I answered the door half dressed. but this is not the story.

I open the box gear looks good. So I was wondering how do I set this up. I go to the site of sp-tech and do not see much for set up.

This thread is 450 pages so plain and simple were are the setup instructions's.

I do not mind starting a thread on setup with a ton of photos and links.

thanks for help

myminer.io

it should be pretty straight forward from there. pool settings etc.

e2a - depending on your environment & factory settings, you may need to;

upgrade firmware

increase fan speed - 80-100
max watts - 285 - 288
startup voltage - 0.68
max voltage - 0.75

BOL!

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

okay my sp20 arrived fedex sent it early. woke me up and I answered the door half dressed. but this is not the story.

I open the box gear looks good. So I was wondering how do I set this up. I go to the site of sp-tech and do not see much for set up.

This thread is 450 pages so plain and simple were are the setup instructions's.

I do not mind starting a thread on setup with a ton of photos and links.

thanks for help

mavericklm

hero member

Activity: 742

Merit: 500

the lower we go in process fabrication(nm) and the higher the speed, better cooling is necessary: heatpipes, watercooling...
compare sp20 to s3...
keep the temperature low and everything is good!

Biffa

legendary

Activity: 3234

Merit: 1220

Quote from: psjw4450 on November 23, 2014, 10:50:21 PM

Is there any reason why none of my SP20's hit the adversited hashing speed of 1700. All of them are 1650 -1500.

Well "officially" from the specs they are "1.7 TH/s ± 10%"

But as to why, my experience is that they only get close to 1.7 if they are kept with intake temps of between 20-22°C anything higher and they tend to slow down as the chips reach near their max temps

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 278. (Read 1260290 times)