Bitcoin Forum>Bitcoin>Mining>Hardware
Pages:
Author

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 280. (Read 1260290 times)

psjw4450
sr. member
Activity: 342
Merit: 250
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 11:06:05 PM
#8904
Quote from: ?? on ??
Quote from: psjw4450 on November 22, 2014, 08:35:07 PM
Has anyone had the issue where they can't access an SP20 at the ip address that what set by the router.  I can't access my my miner to set it up.    

quite often. it can be most frustrating.

you can try              myminer.io        first

if no-go try       arp -a            in cmd box

or more accurate/thorough is advanced IP scanner (freeware) from advanced-ip-scanner.com

B.O.L!




Thanks for the information.  I did myminer.io and I am showing the miners that I can't access.  I still can't access them from this page.  Any other ideas.  

arb -a is showing on the ones that aren't accessbile.
(192.168.1.59) at on eth0

psjw4450
sr. member
Activity: 342
Merit: 250
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 08:35:07 PM
#8903
Has anyone had the issue where they can't access an SP20 at the ip address that what set by the router.  I can't access my my miner to set it up.   
Tigggger
legendary
Activity: 1098
Merit: 1000
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 05:25:45 PM
#8902
Thanks for the reply, sadly can't get my host to do anything until Monday as they aren't in over the weekend.

My gut says it will go back to DHCP too hence my reluctance to try it, was hoping was of the spondoolies guys would know for sure then I might have a chance.
DevonMiner
sr. member
Activity: 471
Merit: 250
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 04:23:16 PM
#8901
Quote from: Tigggger on November 22, 2014, 03:44:14 PM
One of my SP10's stopped working a few hours ago, it seems to be permanently stuck with the message

"The miner is not running or waiting for pool connection"

Minergate seems to be restarting itself every couple of minutes but cgminer isn't running.

Have tried a manual restart of it and a couple of reboots but they haven't fixed it.

I came across a post earlier in this thread that had the same problem and one of the suggestions was a factory reset.  This machine is hosted in another country from me and I just have remote access. If I try this option will it revert to the default of DHCP or will it retain all my IP settings ? If it's the former then if I try it I won't be able to access the machine again until Monday when the hosting centre are available to look at it.

Ask the hosting company techs to do a hard reset first (unplug, leave for a minute) and then power up again. Worked for a SP10 of mine in Iceland. I believe a factory reset would take you back to DHCP.

EDIT: Maybe you've already done a hard reset, by saying 'manual reset'? A factory reset would presumably take the firmware version back to that as installed when the miner was shipped.

Tigggger
legendary
Activity: 1098
Merit: 1000
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 03:44:14 PM
#8900
One of my SP10's stopped working a few hours ago, it seems to be permanently stuck with the message

"The miner is not running or waiting for pool connection"

Minergate seems to be restarting itself every couple of minutes but cgminer isn't running.

Have tried a manual restart of it and a couple of reboots but they haven't fixed it.

I came across a post earlier in this thread that had the same problem and one of the suggestions was a factory reset.  This machine is hosted in another country from me and I just have remote access. If I try this option will it revert to the default of DHCP or will it retain all my IP settings ? If it's the former then if I try it I won't be able to access the machine again until Monday when the hosting centre are available to look at it.
Guy Corem
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 03:07:34 PM
#8899
Quote from: Ski72 on November 22, 2014, 01:54:00 PM
Quote from: Guy Corem on November 22, 2014, 11:29:27 AM
Quote from: GoRDoN-ChoU on November 22, 2014, 11:18:17 AM
Quote from: Guy Corem on November 22, 2014, 11:10:33 AM
Quote from: GoRDoN-ChoU on November 22, 2014, 11:00:23 AM
Quote from: Guy Corem on November 22, 2014, 10:53:13 AM
Quote from: GoRDoN-ChoU on November 22, 2014, 10:46:59 AM
... me too, my emails has been ignored for 5 days
What's your order# and support ticket# ?

Guy
order#3274
dont have a ticket number, thanks for reply
Splitted into 2 separate orders, #3274, #with3274 - ship at the same day but as separate packages.
yes, and when will it ship?
Sunday or Monday the latest.
So order #3292 will be shipping around the same?
Yes
Ski72
member
Activity: 84
Merit: 10
Kinex - The New Frontier
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 01:54:00 PM
#8898
Quote from: Guy Corem on November 22, 2014, 11:29:27 AM
Quote from: GoRDoN-ChoU on November 22, 2014, 11:18:17 AM
Quote from: Guy Corem on November 22, 2014, 11:10:33 AM
Quote from: GoRDoN-ChoU on November 22, 2014, 11:00:23 AM
Quote from: Guy Corem on November 22, 2014, 10:53:13 AM
Quote from: GoRDoN-ChoU on November 22, 2014, 10:46:59 AM
... me too, my emails has been ignored for 5 days
What's your order# and support ticket# ?

Guy
order#3274
dont have a ticket number, thanks for reply
Splitted into 2 separate orders, #3274, #with3274 - ship at the same day but as separate packages.
yes, and when will it ship?
Sunday or Monday the latest.
So order #3292 will be shipping around the same?
Guy Corem
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 11:29:27 AM
#8897
Quote from: GoRDoN-ChoU on November 22, 2014, 11:18:17 AM
Quote from: Guy Corem on November 22, 2014, 11:10:33 AM
Quote from: GoRDoN-ChoU on November 22, 2014, 11:00:23 AM
Quote from: Guy Corem on November 22, 2014, 10:53:13 AM
Quote from: GoRDoN-ChoU on November 22, 2014, 10:46:59 AM
... me too, my emails has been ignored for 5 days
What's your order# and support ticket# ?

Guy
order#3274
dont have a ticket number, thanks for reply
Splitted into 2 separate orders, #3274, #with3274 - ship at the same day but as separate packages.
yes, and when will it ship?
Sunday or Monday the latest.
philipma1957
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 11:19:50 AM
#8896
Quote from: Biffa on November 22, 2014, 11:04:34 AM
Quote from: philipma1957 on November 22, 2014, 10:43:04 AM
yeah but it looks like you are doing exactly what I want to do.
lower the fans .
 lower the watts
lower the hash

Yes but even with the fans at low speed the noise is too much for my wifes ears Shocked

So I replaced the fan with a 130CFM one with a less mechanical scream in the bearings, but the ASICs get hot and underclock themselves automatically to try and stay under 125c (I think thats what they are doing according to the asic stats page)

LOOP[0] ON TO:0
 0: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:703 Ul:749) 101W 143A  83c] ASIC:[115c (125c) 1035hz(BL:1035) 2757 (E:193) F:0 L:0]
 1: DC2DC/1/:[vlt1:679 vlt2:685(DCl:794 Tl:685 Ul:749) 92W 134A  99c] ASIC:[110c (125c) 995hz(BL: 995) 2659 (E:193) F:0 L:0]
LOOP[1] ON TO:0
 2: DC2DC/1/:[vlt1:615 vlt2:616(DCl:794 Tl:616 Ul:749) 56W  91A  92c] ASIC:[115c (125c) 760hz(BL: 760) 2111 (E:193) F:0 L:0]
 3: DC2DC/1/:[vlt1:593 vlt2:597(DCl:794 Tl:597 Ul:749) 54W  90A  95c] ASIC:[120c (125c) 760hz(BL: 760) 2024 (E:192) F:0 L:0]
LOOP[2] ON TO:0
 4: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:698 Ul:749) 99W 142A  85c] ASIC:[120c (125c) 1025hz(BL:1025) 2850 (E:193) F:0 L:0]
 5: DC2DC/1/:[vlt1:673 vlt2:680(DCl:794 Tl:680 Ul:749) 87W 129A  97c] ASIC:[120c (125c) 960hz(BL: 960) 2524 (E:193) F:0 L:0]
LOOP[3] ON TO:0
 6: DC2DC/1/:[vlt1:626 vlt2:632(DCl:794 Tl:632 Ul:749) 60W  94A  91c] ASIC:[115c (125c) 775hz(BL: 775) 2093 (E:192) F:0 L:0]
 7: DC2DC/1/:[vlt1:601 vlt2:602(DCl:794 Tl:602 Ul:749) 53W  88A  92c] ASIC:[120c (125c) 750hz(BL: 750) 1939 (E:192) F:0 L:0]




 this sounds like a plan for me  my goal is 900 watts and 1400gh with decent noise level. my ordered ship so I should get it on tues or weds.

I can then directly match it up noise wise with the s-3's   1 sp20 matched against 3 s-3's
Once i test a bit I can order more of them.
GoRDoN-ChoU
newbie
Activity: 39
Merit: 0
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 11:18:17 AM
#8895
Quote from: Guy Corem on November 22, 2014, 11:10:33 AM
Quote from: GoRDoN-ChoU on November 22, 2014, 11:00:23 AM
Quote from: Guy Corem on November 22, 2014, 10:53:13 AM
Quote from: GoRDoN-ChoU on November 22, 2014, 10:46:59 AM
... me too, my emails has been ignored for 5 days
What's your order# and support ticket# ?

Guy
order#3274
dont have a ticket number, thanks for reply
Splitted into 2 separate orders, #3274, #with3274 - ship at the same day but as separate packages.
yes, and when will it ship?
Guy Corem
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 11:10:33 AM
#8894
Quote from: GoRDoN-ChoU on November 22, 2014, 11:00:23 AM
Quote from: Guy Corem on November 22, 2014, 10:53:13 AM
Quote from: GoRDoN-ChoU on November 22, 2014, 10:46:59 AM
... me too, my emails has been ignored for 5 days
What's your order# and support ticket# ?

Guy
order#3274
dont have a ticket number, thanks for reply
Splitted into 2 separate orders, #3274, #with3274 - ship at the same day but as separate packages.
Biffa
legendary
Activity: 3234
Merit: 1220
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 11:04:34 AM
#8893
Quote from: philipma1957 on November 22, 2014, 10:43:04 AM
yeah but it looks like you are doing exactly what I want to do.
lower the fans .
 lower the watts
lower the hash

Yes but even with the fans at low speed the noise is too much for my wifes ears Shocked

So I replaced the fan with a 130CFM one with a less mechanical scream in the bearings, but the ASICs get hot and underclock themselves automatically to try and stay under 125c (I think thats what they are doing according to the asic stats page)

LOOP[0] ON TO:0
 0: DC2DC/1/:[vlt1:699 vlt2:703(DCl:794 Tl:703 Ul:749) 101W 143A  83c] ASIC:[115c (125c) 1035hz(BL:1035) 2757 (E:193) F:0 L:0]
 1: DC2DC/1/:[vlt1:679 vlt2:685(DCl:794 Tl:685 Ul:749) 92W 134A  99c] ASIC:[110c (125c) 995hz(BL: 995) 2659 (E:193) F:0 L:0]
LOOP[1] ON TO:0
 2: DC2DC/1/:[vlt1:615 vlt2:616(DCl:794 Tl:616 Ul:749) 56W  91A  92c] ASIC:[115c (125c) 760hz(BL: 760) 2111 (E:193) F:0 L:0]
 3: DC2DC/1/:[vlt1:593 vlt2:597(DCl:794 Tl:597 Ul:749) 54W  90A  95c] ASIC:[120c (125c) 760hz(BL: 760) 2024 (E:192) F:0 L:0]
LOOP[2] ON TO:0
 4: DC2DC/1/:[vlt1:693 vlt2:698(DCl:794 Tl:698 Ul:749) 99W 142A  85c] ASIC:[120c (125c) 1025hz(BL:1025) 2850 (E:193) F:0 L:0]
 5: DC2DC/1/:[vlt1:673 vlt2:680(DCl:794 Tl:680 Ul:749) 87W 129A  97c] ASIC:[120c (125c) 960hz(BL: 960) 2524 (E:193) F:0 L:0]
LOOP[3] ON TO:0
 6: DC2DC/1/:[vlt1:626 vlt2:632(DCl:794 Tl:632 Ul:749) 60W  94A  91c] ASIC:[115c (125c) 775hz(BL: 775) 2093 (E:192) F:0 L:0]
 7: DC2DC/1/:[vlt1:601 vlt2:602(DCl:794 Tl:602 Ul:749) 53W  88A  92c] ASIC:[120c (125c) 750hz(BL: 750) 1939 (E:192) F:0 L:0]
GoRDoN-ChoU
newbie
Activity: 39
Merit: 0
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 11:00:23 AM
#8892
Quote from: Guy Corem on November 22, 2014, 10:53:13 AM
Quote from: GoRDoN-ChoU on November 22, 2014, 10:46:59 AM
... me too, my emails has been ignored for 5 days
What's your order# and support ticket# ?

Guy
order#3274
dont have a ticket number, thanks for reply
Guy Corem
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 10:53:13 AM
#8891
Quote from: GoRDoN-ChoU on November 22, 2014, 10:46:59 AM
... me too, my emails has been ignored for 5 days
What's your order# and support ticket# ?

Guy
GoRDoN-ChoU
newbie
Activity: 39
Merit: 0
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 10:46:59 AM
#8890
Quote from: 727miner on November 21, 2014, 07:46:24 AM
Quote from: ScaryHash on November 21, 2014, 07:40:12 AM
Quote from: zvisha on November 19, 2014, 07:29:35 AM
Hi All
We have now new support team.
You can see them online as spond.support.1 (Sonya) and spond.support.2 (Michael).
They accept direct Skype calls between 14:00-16:00 and 19:00-21:00 Israel time.

You can also send mail like always, to [email protected].

If they can not help, they will redirect you to me.


Well, got up early today to talk to support. It's 14:37 Jerusalem time, nobody there.

Now I gotta go to work.

I get off work too late to talk to them at 1900 hours...some I'm screwed for another week.



I feel your pain, they've been ignoring my emails for 3 days now. Customer support is non-existent.
me too, my emails has been ignored for 5 days
philipma1957
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 10:43:04 AM
#8889
Quote from: Biffa on November 22, 2014, 10:03:42 AM
Quote from: philipma1957 on November 22, 2014, 09:23:39 AM
Quote from: Biffa on November 22, 2014, 04:55:30 AM
Quote from: ?? on ??
anyone else having MUCH less than expected results from 2.5.12 upgrade?



Please provide link to 2.3.46 FW if possible

and an option to set the fans higher than 90

For what model? 2.5.26 just released for SP20 Smiley

None of the firmware has made any difference to mine, just sits around 1.4TH

Very temperature locked.

what watts for that number?
do you have results for the next lower watt setting?

say ? watts =  1400gh
say ? watts  = 1300gh
say ? watts = 1200gh

I always tend to underclock a bit so I would be interested in slight underclock info




Mines not really indicative of a normal SP20 I'm running a half speed fan so I can keep my sanity.

The thing is it automatically downclocks if the asic temps get too high, which drops the overall power consumption.

So at 1400gh its using under 900W even though I have the settings maxed out in the web interface.

Yes if you do lower the watts it does automatically lower the hashing speed but it would also depend on your PSU if you are after wall watts.

I could do some tests tonight


yeah but it looks like you are doing exactly what I want to do.
lower the fans .
 lower the watts
lower the hash

and get great watt to gh.  900/1400 is 0.64 watts per gh please let us know some more .

 I play around with s-3's a lot I can get them quiet  use 1075 watts for 466 + 451 + 434 = 1351 or 1075/1351 = 0.79 watts per gh

so the sp20 is a lot more efficient at your settings.

I have a evga 1600 p2 waiting for this sp20
Biffa
legendary
Activity: 3234
Merit: 1220
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 10:03:42 AM
#8888
Quote from: philipma1957 on November 22, 2014, 09:23:39 AM
Quote from: Biffa on November 22, 2014, 04:55:30 AM
Quote from: ?? on ??
anyone else having MUCH less than expected results from 2.5.12 upgrade?



Please provide link to 2.3.46 FW if possible

and an option to set the fans higher than 90

For what model? 2.5.26 just released for SP20 Smiley

None of the firmware has made any difference to mine, just sits around 1.4TH

Very temperature locked.

what watts for that number?
do you have results for the next lower watt setting?

say ? watts =  1400gh
say ? watts  = 1300gh
say ? watts = 1200gh

I always tend to underclock a bit so I would be interested in slight underclock info




Mines not really indicative of a normal SP20 I'm running a half speed fan so I can keep my sanity.

The thing is it automatically downclocks if the asic temps get too high, which drops the overall power consumption.

So at 1400gh its using under 900W even though I have the settings maxed out in the web interface.

Yes if you do lower the watts it does automatically lower the hashing speed but it would also depend on your PSU if you are after wall watts.

I could do some tests tonight
philipma1957
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 09:23:39 AM
#8887
Quote from: Biffa on November 22, 2014, 04:55:30 AM
Quote from: ?? on ??
anyone else having MUCH less than expected results from 2.5.12 upgrade?



Please provide link to 2.3.46 FW if possible

and an option to set the fans higher than 90

For what model? 2.5.26 just released for SP20 Smiley

None of the firmware has made any difference to mine, just sits around 1.4TH

Very temperature locked.

what watts for that number?
do you have results for the next lower watt setting?

say ? watts =  1400gh
say ? watts  = 1300gh
say ? watts = 1200gh

I always tend to underclock a bit so I would be interested in slight underclock info


Biffa
legendary
Activity: 3234
Merit: 1220
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 09:20:40 AM
#8886
Quote from: Grix on November 22, 2014, 06:27:44 AM
Suddenly my SP30 gained 200GHps for seemingly no reason  Grin



Lower temps maybe? Or did you do something you lil devil you! Cheesy
Grix
hero member
Activity: 536
Merit: 500
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
November 22, 2014, 06:27:44 AM
#8885
Suddenly my SP30 gained 200GHps for seemingly no reason  Grin

Pages:
Bitcoin Forum>Bitcoin>Mining>Hardware
Jump to: