Pages:
Author

Topic: [ANN] [SUP] Supcoin, PLUCK algorithm, Just Launched, Mine Now! - page 25. (Read 62221 times)

legendary
Activity: 952
Merit: 1000
...tested coinminers the last 14hours. worked out quite well.
the blockoverview is nearly the same on both pools: last 24h = 133%

but would be nice to get some more hash to get faster block times!


Yes, it'll be really good if the hashes are spread over the pools, fees are the same on both pools so you get the same coins.


why not rise the fees on your pool to make people think about spreading the hash?


I cannot just rise the Fee while miners are mining..  It is like your landlord is rising your rent while you are in the flat Smiley



Of course you can - it's just a shitty thing to do unless you give them reasonable notice.

Also a good way to shit on your customer base.
legendary
Activity: 2688
Merit: 1240
...tested coinminers the last 14hours. worked out quite well.
the blockoverview is nearly the same on both pools: last 24h = 133%

but would be nice to get some more hash to get faster block times!


Yes, it'll be really good if the hashes are spread over the pools, fees are the same on both pools so you get the same coins.


why not rise the fees on your pool to make people think about spreading the hash?


I cannot just rise the Fee while miners are mining..  It is like your landlord is rising your rent while you are in the flat Smiley

hero member
Activity: 610
Merit: 500
Surely no one will be able to release AMD GPU miner
sr. member
Activity: 249
Merit: 250
legendary
Activity: 2940
Merit: 1169
Is there AMD GPU miner?
hero member
Activity: 610
Merit: 500
Net Hashrate: 2,579.17 KH/s  Shocked wtf
sr. member
Activity: 330
Merit: 252
...tested coinminers the last 14hours. worked out quite well.
the blockoverview is nearly the same on both pools: last 24h = 133%

but would be nice to get some more hash to get faster block times!


Yes, it'll be really good if the hashes are spread over the pools, fees are the same on both pools so you get the same coins.


why not rise the fees on your pool to make people think about spreading the hash?
full member
Activity: 126
Merit: 100
wolf0 man you know cpus arent so strong when there is gpus so you can release it will not cause to difficulity to be more
legendary
Activity: 1027
Merit: 1000

my card is gt 650 m and my throught value is 0.4

You can try between 0.4 and 1.1 values for throught
you can give the configuration file.bat?

ccminer30 -a pluck -o stratum+tcp://sup.suprnova.cc:7777 -u xxx.xxx -p xxxx --throughput 0.4 -f 1
thank you
but gt 630 m not working
legendary
Activity: 1470
Merit: 1024

my card is gt 650 m and my throught value is 0.4

You can try between 0.4 and 1.1 values for throught
you can give the configuration file.bat?

ccminer30 -a pluck -o stratum+tcp://sup.suprnova.cc:7777 -u xxx.xxx -p xxxx --throughput 0.4 -f 1
hero member
Activity: 500
Merit: 500
....oh, just I get 10 SUP tomy testwallet,...so the "no payout adress provided" should not be a problem Wink
no problem, coinbase-adress is buggy in solomine

Solo Miners!

If you are using CPU miner, please do not use the --coinbase-address flag. I'm investigating an issue where the miner doesn't properly construct blocks with the block height in the coinbase. Long story short, remove that flag to use "getwork" rather than "getblocktemplate". Getwork does not suffer from this problem and the CPU miner should work fine when using it.

you can now switch on real network (use a pool, solomine is quite impossible) and you can also delete your testwallet, he's worthless.
legendary
Activity: 1027
Merit: 1000
can someone help me get the nvidia miner to work? 2x750ti's, win64. using driver 344.11
can someone with same setup confirm that theirs work?

i have a 660 in slot 0 that im not using, and the 750ti's in slot 1+2

my command is
ccminer.exe -a pluck  -o stratum+tcp://sup.suprnova.cc:7777  -u xxx.750ti -p x -d750ti#1,750ti#2 --throughput 4.,4. -f 1

this gives me bsod after a hefty driver-crashing-flickering event.

halp plox?

The 660 needs ccminer30.exe, the 750 needs ccminer.exe.

I am not using the 660 for mining. It's a desktop/gaming only card. I just mention it since it's is in the system.

Try to lower the --throughput

my card is gt 650 m and my throught value is 0.4

You can try between 0.4 and 1.1 values for throught
you can give the configuration file.bat?
sr. member
Activity: 249
Merit: 250
can someone help me get the nvidia miner to work? 2x750ti's, win64. using driver 344.11
can someone with same setup confirm that theirs work?

i have a 660 in slot 0 that im not using, and the 750ti's in slot 1+2

my command is
ccminer.exe -a pluck  -o stratum+tcp://sup.suprnova.cc:7777  -u xxx.750ti -p x -d750ti#1,750ti#2 --throughput 4.,4. -f 1

this gives me bsod after a hefty driver-crashing-flickering event.

halp plox?

The 660 needs ccminer30.exe, the 750 needs ccminer.exe.

I am not using the 660 for mining. It's a desktop/gaming only card. I just mention it since it's is in the system.

Try to lower the --throughput

my card is gt 650 m and my throught value is 0.4

You can try between 0.4 and 1.1 values for throught

What is a value range i can try and not get bluescreen every time?
Its rather annoying since i need to restart a lot of stuff for it.
I have absolutely no problems with this setup for any other coin types.



2.95
full member
Activity: 141
Merit: 100
can someone help me get the nvidia miner to work? 2x750ti's, win64. using driver 344.11
can someone with same setup confirm that theirs work?

i have a 660 in slot 0 that im not using, and the 750ti's in slot 1+2

my command is
ccminer.exe -a pluck  -o stratum+tcp://sup.suprnova.cc:7777  -u xxx.750ti -p x -d750ti#1,750ti#2 --throughput 4.,4. -f 1

this gives me bsod after a hefty driver-crashing-flickering event.

halp plox?

The 660 needs ccminer30.exe, the 750 needs ccminer.exe.

I am not using the 660 for mining. It's a desktop/gaming only card. I just mention it since it's is in the system.

Try to lower the --throughput

my card is gt 650 m and my throught value is 0.4

You can try between 0.4 and 1.1 values for throught

What is a value range i can try and not get bluescreen every time?
Its rather annoying since i need to restart a lot of stuff for it.
I have absolutely no problems with this setup for any other coin types.

legendary
Activity: 1455
Merit: 1033
and launch your test wallet with
Quote
supcoin-qt.exe -testnet
and your miner with
Quote
wolf-pluckminer-generic64.exe -o http://127.0.0.1:14412 -O :
warning: testnet is on port 14412, real network is on 4412
you will save a lot of time to testing on testnet.

the same problem at testnet:
Code:
[2015-02-21 11:42:47] Binding thread 1 to cpu 1
[2015-02-21 11:42:47] 4 miner threads started, using 'pluck' algorithm.
[2015-02-21 11:42:47] Binding thread 0 to cpu 0
[2015-02-21 11:42:47] Binding thread 2 to cpu 2
[2015-02-21 11:42:47] Binding thread 3 to cpu 3
[2015-02-21 11:42:47] No payout address provided, switching to getwork
[2015-02-21 11:42:57] thread 3: 512 hashes, 0.05 khash/s
[2015-02-21 11:42:57] thread 0: 512 hashes, 0.05 khash/s
[2015-02-21 11:42:57] thread 2: 512 hashes, 0.05 khash/s

edit:

....oh, just I get 10 SUP tomy testwallet,...so the "no payout adress provided" should not be a problem Wink
legendary
Activity: 1470
Merit: 1024
can someone help me get the nvidia miner to work? 2x750ti's, win64. using driver 344.11
can someone with same setup confirm that theirs work?

i have a 660 in slot 0 that im not using, and the 750ti's in slot 1+2

my command is
ccminer.exe -a pluck  -o stratum+tcp://sup.suprnova.cc:7777  -u xxx.750ti -p x -d750ti#1,750ti#2 --throughput 4.,4. -f 1

this gives me bsod after a hefty driver-crashing-flickering event.

halp plox?

The 660 needs ccminer30.exe, the 750 needs ccminer.exe.

I am not using the 660 for mining. It's a desktop/gaming only card. I just mention it since it's is in the system.

Try to lower the --throughput

my card is gt 650 m and my throught value is 0.4

You can try between 0.4 and 1.1 values for throught
legendary
Activity: 1722
Merit: 1000
Admin of CoinMiners Pools
can someone help me get the nvidia miner to work? 2x750ti's, win64. using driver 344.11
can someone with same setup confirm that theirs work?

i have a 660 in slot 0 that im not using, and the 750ti's in slot 1+2

my command is
ccminer.exe -a pluck  -o stratum+tcp://sup.suprnova.cc:7777  -u xxx.750ti -p x -d750ti#1,750ti#2 --throughput 4.,4. -f 1

this gives me bsod after a hefty driver-crashing-flickering event.

halp plox?

The 660 needs ccminer30.exe, the 750 needs ccminer.exe.

I am not using the 660 for mining. It's a desktop/gaming only card. I just mention it since it's is in the system.

Try to lower the --throughput
full member
Activity: 141
Merit: 100
can someone help me get the nvidia miner to work? 2x750ti's, win64. using driver 344.11
can someone with same setup confirm that theirs work?

i have a 660 in slot 0 that im not using, and the 750ti's in slot 1+2

my command is
ccminer.exe -a pluck  -o stratum+tcp://sup.suprnova.cc:7777  -u xxx.750ti -p x -d750ti#1,750ti#2 --throughput 4.,4. -f 1

this gives me bsod after a hefty driver-crashing-flickering event.

halp plox?

The 660 needs ccminer30.exe, the 750 needs ccminer.exe.

I am not using the 660 for mining. It's a desktop/gaming only card. I just mention it since it's is in the system.
hero member
Activity: 500
Merit: 500
and launch your test wallet with
Quote
supcoin-qt.exe -testnet
and your miner with
Quote
wolf-pluckminer-generic64.exe -o http://127.0.0.1:14412 -O :
warning: testnet is on port 14412, real network is on 4412
you will save a lot of time to testing on testnet.
sr. member
Activity: 249
Merit: 250
Hello,
I trie the first time to mine a coin, so my questions perhabs sounds al "little" bit nooby  Roll Eyes

I startet the Wallet-Software, and downloaded the Wolf-pluckminer (renamed to pluck.exe) to the same directory.
make an

supercoinf.conf:

rpcuser=testusername
rpcpassword=testpass
server=1


make a mining.bat:

pluck.exe -o http://127.0.0.1:4412 -O testusername:testpass

But when I start I get the massage: no payout adress provided, switch to gerwork
..and the mining starts....

;-/

It should be

Code:
pluck.exe -t -o 127.0.0.1:4412 -u testusername -p testpass
No, the same problem ;-/
no payout adress provided, switch to gerwork
do I have to make anything at the Walletsoftware? ..I only installed it and have it running

Why not mine on a pool?

first time I trie it,...it´s only a test so I don´t want to register me on another Site or Pool. Wink

It has to be supcoin.conf not supercoinf.conf
Pages:
Jump to: