this is what I have so far but I dont know how to do the rest Code:
sgminer -k pluck -o stratum+tcp://stratum.coin-miners.info:3637 -u ipwn7474.homegreg -p homegreg
Topic: [ANN] [SUP] Supcoin, PLUCK algorithm, Just Launched, Mine Now! - page 9. (Read 62238 times)
February 23, 2015, 01:10:15 PM
anyone here have a 6850? because I have no idea how to get the config right and was wondering if you could share your config this is what I have so far but I dont know how to do the rest
this is what I have so far but I dont know how to do the rest February 23, 2015, 12:56:00 PM
that will probably sound weird, but if you have lots of 750ti or 900x nvidia cards, moving to sgminer might increase the performance...
750ti 2.3->3.75
980 8.5->9.5
with "-w 4 -I 13"
performance for the 780ti are better with the cuda version...
Alas, I have not. 750ti (1280/5400 MHz) issued 1.8-1.95 kh, on the sgminer began to give 1.6-1.7 kh. Tried different values of W and I.750ti 2.3->3.75
980 8.5->9.5
with "-w 4 -I 13"
performance for the 780ti are better with the cuda version...
my gtx980 pushes 11khash @ 1550mhz / 4000mem with sgminer
February 23, 2015, 12:16:31 PM
that will probably sound weird, but if you have lots of 750ti or 900x nvidia cards, moving to sgminer might increase the performance...
750ti 2.3->3.75
980 8.5->9.5
with "-w 4 -I 13"
performance for the 780ti are better with the cuda version...
Alas, I have not. 750ti (1280/5400 MHz) issued 1.8-1.95 kh, on the sgminer began to give 1.6-1.7 kh. Tried different values of W and I. 750ti 2.3->3.75
980 8.5->9.5
with "-w 4 -I 13"
performance for the 780ti are better with the cuda version...
February 23, 2015, 12:10:05 PM
I am attempting to set up a block explorer. Can I get the RPCPORT and PORT?
4412 and 4411 I believe?
Also, I forgot to update the ANN (will later) but there is a block explorer up now http://cryptobe.com/chain/SupCoin
Okay. Well I will just set it up to test my script. Is there any other services you need?
February 23, 2015, 12:09:00 PM
I am attempting to set up a block explorer. Can I get the RPCPORT and PORT?
4412 and 4411 I believe?
Also, I forgot to update the ANN (will later) but there is a block explorer up now http://cryptobe.com/chain/SupCoin
February 23, 2015, 12:01:00 PM
I am attempting to set up a block explorer. Can I get the RPCPORT and PORT?
February 23, 2015, 11:51:11 AM
please tell me what is the fastest Nvidia miner for gtx 970 ?
February 23, 2015, 11:39:32 AM
so high the diff& the price so lowIn these days mining so hard, so many farms out there
February 23, 2015, 11:38:17 AM
buy new vga card 270,280,290 and everything's work fine
and everything's work fine Speaking of, I cant seem to get more than 6.5kh out of my Tri-X 290. I have played around a bit with worksize, intensity, miner, and thats the best I can get. Some have posted 10kh from a 280x, I should at least be in that ball park, any takers?
I'm getting 9kh on my 290's: I 18, TC 24576, w 6. But I'm getting 7% rejects, have to finetune a little more.
February 23, 2015, 11:36:26 AM
I keep getting this.
Code:
[18:37:04] Started sgminer 5.1.0
[18:37:04] * using Jansson 2.7
[18:37:05] Probing for an alive pool
[18:37:05] stratum.coin-miners.info difficulty changed to 0.100
[18:37:07] Startup GPU initialization... Using settings from pool stratum.coin-miners.info.
[18:37:07] Startup Pool No = 0
[18:37:07] Building binary pluckBonairegw8l4lgtc4096.bin
[18:37:07] Error -11: Building Program (clBuildProgram)
[18:37:07] "C:\Users\Yampi\AppData\Local\Temp\OCL6840T5.cl", line 544: error: bad
argument type to opencl as_* function: expected src and dst have the
same size
if( ((__global uint *)hashbuffer)[7] <= (target)) {output[atomic_inc(output + 0xFF)] = SWAP3
2(get_global_id(0));
^
"C:\Users\Yampi\AppData\Local\Temp\OCL6840T5.cl", line 544: error: bad
argument type to opencl as_* function: e[18:37:07] Failed to init GPU thread 0, disabling
device 0
[18:37:07] Restarting the GPU from the menu will not fix this.
[18:37:07] Re-check your configuration and try restarting.
Press enter to continue:
[18:37:04] * using Jansson 2.7
[18:37:05] Probing for an alive pool
[18:37:05] stratum.coin-miners.info difficulty changed to 0.100
[18:37:07] Startup GPU initialization... Using settings from pool stratum.coin-miners.info.
[18:37:07] Startup Pool No = 0
[18:37:07] Building binary pluckBonairegw8l4lgtc4096.bin
[18:37:07] Error -11: Building Program (clBuildProgram)
[18:37:07] "C:\Users\Yampi\AppData\Local\Temp\OCL6840T5.cl", line 544: error: bad
argument type to opencl as_* function: expected src and dst have the
same size
if( ((__global uint *)hashbuffer)[7] <= (target)) {output[atomic_inc(output + 0xFF)] = SWAP3
2(get_global_id(0));
^
"C:\Users\Yampi\AppData\Local\Temp\OCL6840T5.cl", line 544: error: bad
argument type to opencl as_* function: e[18:37:07] Failed to init GPU thread 0, disabling
device 0
[18:37:07] Restarting the GPU from the menu will not fix this.
[18:37:07] Re-check your configuration and try restarting.
Press enter to continue:
February 23, 2015, 11:17:28 AM
Is there rich list somewhere?
February 23, 2015, 11:10:30 AM
try using sgminer (who knows it might work)
djm34....plz 6950 gpu not working on that sgminer amd ..plz update for 6950 card ....plzplzplz
What kind of error message are you getting ? (may-be it is that missing (uint) on the nonce))
with cgminer 3.7.1 , your wolf-x11Tahitigw64l8ku0 Bin 940( I know that your bin is for sgminer but I like to try with cgminer) and I took Bin from old Neo miner .Using Notepad I did some changes and mixed codes together an in while mining Nakamoto coin ( usualy 7MH/s per single R9 280x x 3 around 21 Mh/s ) after changes those 3 Bin files my cards got really crazy movement and noise for moment and I'd seen huge jump with MH/S at my screen .After while my hard disc got error and was gone.But I did picture of this high spike MH/s .I wish to make a copy of that new bin file but i'd lost after hard disc error.I made this post because I think that your BIN file have some not discovered power after split codes with Neo BIN.I know that was just luck or I'm completely wrong .But here .Two images at that spike.
Any opinion about that? Wonder if that was reason that my hard drive got error and stop working.
Neo and X11 aren't even close to similar; I don't see it.
February 23, 2015, 10:38:03 AM
try using sgminer (who knows it might work)
djm34....plz 6950 gpu not working on that sgminer amd ..plz update for 6950 card ....plzplzplz
What kind of error message are you getting ? (may-be it is that missing (uint) on the nonce))
with cgminer 3.7.1 , your wolf-x11Tahitigw64l8ku0 Bin 940( I know that your bin is for sgminer but I like to try with cgminer) and I took Bin from old Neo miner .Using Notepad I did some changes and mixed codes together an in while mining Nakamoto coin ( usualy 7MH/s per single R9 280x x 3 around 21 Mh/s ) after changes those 3 Bin files my cards got really crazy movement and noise for moment and I'd seen huge jump with MH/S at my screen .After while my hard disc got error and was gone.But I did picture of this high spike MH/s .I wish to make a copy of that new bin file but i'd lost after hard disc error.I made this post because I think that your BIN file have some not discovered power after split codes with Neo BIN.I know that was just luck or I'm completely wrong .But here .Two images at that spike.
Any opinion about that? Wonder if that was reason that my hard drive got error and stop working.Here you are two images from my experiment with single R9 280x
February 23, 2015, 10:33:42 AM
buy new vga card 270,280,290 and everything's work fine
and everything's work fine Speaking of, I cant seem to get more than 6.5kh out of my Tri-X 290. I have played around a bit with worksize, intensity, miner, and thats the best I can get. Some have posted 10kh from a 280x, I should at least be in that ball park, any takers?
I'm getting 6.4kh from an 270 non x. haven't toyed around with it, using --gpu-memclock 1400 --gpu-engine 1150 -w 10 -i 13
oddly the 270x is only giving me 5.8kh same settings but the card that runs the display so its gonna be down to that
you should definitely be getting more hashes than me most of my settings are the same for X11
February 23, 2015, 09:42:03 AM
My HD6570 GPU is sick.
Lower your worksize to 8I have not the same
Here is my code
Code:
del *.bin
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k pluck --no-submit-stale -o stratum+tcp://sup.suprnova.cc:7776 -u xxxx.xxx -p x -o stratum+tcp://stratum.coin-miners.info:3633 -u xxxx.xxx -p x -w 8 -I 12 -g 1 --shaders 480 --api-listen --api-allow W:127.0.0.1pause
Check out your power cord.If your psu is connected to extension cord or any other extension will cost you error SICK no matter how much you change I-.Check out your power cord and remember that psu HAVE TO be connected directly to wall outlet. Just simple helping hint from my knowledge and already helps over 380 miners .Good lucksetx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k pluck --no-submit-stale -o stratum+tcp://sup.suprnova.cc:7776 -u xxxx.xxx -p x -o stratum+tcp://stratum.coin-miners.info:3633 -u xxxx.xxx -p x -w 8 -I 12 -g 1 --shaders 480 --api-listen --api-allow W:127.0.0.1pause
February 23, 2015, 09:16:27 AM
buy new vga card 270,280,290 and everything's work fine
and everything's work fine Speaking of, I cant seem to get more than 6.5kh out of my Tri-X 290. I have played around a bit with worksize, intensity, miner, and thats the best I can get. Some have posted 10kh from a 280x, I should at least be in that ball park, any takers?
February 23, 2015, 09:08:24 AM
buy new vga card 270,280,290 and everything's work fine
and everything's work fine February 23, 2015, 08:42:27 AM
try using sgminer (who knows it might work)
djm34....plz 6950 gpu not working on that sgminer amd ..plz update for 6950 card ....plzplzplz
What kind of error message are you getting ? (may-be it is that missing (uint) on the nonce))
djm34...it run on 6950 but only 300 h/s speed....what problam it is..not aundstand still..i use win7 32 -I 11 -W 8 -GPU 900 MHZ ..PLZ MODIFY KERNEL ..PULCK.CL FOR ME...PLZ PLZ PLZ
Dude, you have some issues.
WOF0 YES ..I HAVE SOME ISSUE BUT LAST TWO DAY I AM TRYING TO SOLVE IT?....PLZ HELP ME
February 23, 2015, 08:31:12 AM
try using sgminer (who knows it might work)
djm34....plz 6950 gpu not working on that sgminer amd ..plz update for 6950 card ....plzplzplz
What kind of error message are you getting ? (may-be it is that missing (uint) on the nonce))
djm34...it run on 6950 but only 300 h/s speed....what problam it is..not aundstand still..i use win7 32 -I 11 -W 8 -GPU 900 MHZ ..PLZ MODIFY KERNEL ..PULCK.CL FOR ME...PLZ PLZ PLZ
February 23, 2015, 08:22:06 AM
try using sgminer (who knows it might work)
djm34....plz 6950 gpu not working on that sgminer amd ..plz update for 6950 card ....plzplzplz
What kind of error message are you getting ? (may-be it is that missing (uint) on the nonce))
Jump to: