Topic: [ANN] [SUP] Supcoin, PLUCK algorithm, Just Launched, Mine Now! - page 12. (Read 62238 times)

I gained 10.7 kH/s with 2nd djm34's miner , without any hardware errors at clocks 1100/1500

I might, or I might work on something else. Or I might just say fuck it and play Skyrim all day, who knows.

Looks like it's picking up your integrated intel graphics instead of the AMD driver. Run sgminer with the -n parameter to see if your card is detected without errors. You could try disabling the integrated graphics from the device manager.

Here is a Win x64 sgminer I compiled from djm34's updated git source:

https://mega.co.nz/#!gAFXyJKB!Zudke2WSrmHfhcXiG-urMqWurY874FFOJ43nRcuB5u8

Good to see the hash has started to spread a bit beyond one pool.  I switched from coin-miners to hardcoreminers to try and spread it some more, I would suggest some others do the same or the OP remove it and put a notice not to just pick the first pool or the highest hashrate pool on the main page next to the pool listings.

With the updated AMD gpu miner I am able to get about 1.1Kh/s on a r7 270 clocked at 950Mhz core.  Can not bring the intensity up beyond 8 or they crash and with a worksize of 8 I was only getting about 800H/s.  Temp tops at about 34 but the indoor temp is 20 inside right now.  Pretty close to what an fx8350 can pull.  Should give a decent basis for someone else running something near the same or who wants to run a two part or multi pool failover.

run.bat
del *.bin
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe --config sgminer.conf

config

{
"pools" : [
        {
      "url" : "stratum+tcp://stratum.eu.sup.hardcoreminers.com:3022",
      "user" : "nightshade00013.N",
      "pass" : "L"
   },
   {
      "url" : "stratum+tcp://stratum.coin-miners.info:3637",
      "user" : "nightshade00013.N",
      "pass" : "L"
   },
        {
      "url" : "stratum+tcp://sup.suprnova.cc:7777",
      "user" : "nightshade00013.N",
      "pass" : "L"
   }
]
,
"intensity" : "8",
"worksize" : "16",
"kernel" : "pluck",
"thread-concurrency" : "256",
"gpu-threads" : "1",
"vectors" : "1",
"temp-cutoff" : "60",
"temp-overheat" : "55",
"temp-target" : "45",
"expiry" : "120",
"failover-only" : true,
"hotplug" : "5",
"failover-switch-delay" : "60",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "5",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

Mining on a pair of 6850's is basically crash city or 200H/s. . . seems they only like x11 coins at this point but they are factory overclocked and I think it has something do do with the memory speed and voltages.

He's letting the Windows miners raise the diff first. 

Wolf0

That is like a foreign language to me.

I have no idea where to even do that at.

From the link djm posted in the no error.

EDIT: Same error after moving.

Try putting sgminer.exe in the kernel folder.

What miner are you using ?

I keep getting this error



Any help any one?

SupCoin Faucet
http://faucet.coin43.com/supcoin/

Payout every 30 minutes 0.001-0.002 SUP

Miner with bat for GTX 770 sample.

https://mega.co.nz/#!i8AWgLDL!S49na-SXW2RsM_5x9ezSZUoyNHdUZfPCM_G6vnGZi8I

GTX 560 is not possible.

@go6ooo1212 dev is "busy" can not do this coin, but premine is very minimal, he did this for something much larger coming up, gut GPU coins will suffer from this predicament without exception, there is no fairness actually "AMD" developer could have gone and collected 1000 Supcoin really fast problem is that "market" knows this

the only chance here is "community" price is going to continue to plummet big time

here how funny it is actually.. although developer is a C++ expert but "busy" "I have new algo "pluck" he said" initially nvidia mining was enabled so we had reasonable pace.. some got to 100 coins some a bit more.. then AMD.. the "C++" experts also knows VIA codebase really well and borrowed few things from there as well.. it is all very typical

the same day! a clone has arrived.. someone copied this coin. and cloned it bit by bit.. premine was raised to 7000 but also max coin cap.. that person and "community" can not wait enough for bittrex to sell.. they are not hoping for super large profit but to unload 6000 coins so that could be several BTC.. which is like a 1000 dollars let say, they do can do this now with their eyes closed

bittrex probably will list it.. most of you know which coin, bittrex does not care as they will collect 10%  to 20% winners are exchanges not you

Sinse we have AMD raping the hash , Nvidia isn't so compatible. Would be some CUDA-Maxwell improvement ...

Thanks
Where i can dowload?
There ? : https://github.com/cbuchner1/ccminer/releases
And for GTX 560 is possible?

GTX 770s are compute v3.0, so you need ccminer30.exe.

Here you go.

sgminer -k pluck -o stratum+tcp://sup.suprnova.cc:7776 -u Username -p Password  -I 13 --worksize 8 --gpu-engine 1100 --gpu-memclock 1500

Hello
My friend have a GTX 770 why is not work any receive in pool?
Code in .bat :

ccminer.exe -a pluck -o stratum+tcp://sup.suprnova.cc:7777 -u iro.iro -p flowers --throughput 4 -f 1


http://i.gyazo.com/e915b60eb28bc514d33ec47c4657a47f.png

Hello,
Someone can give me full config for 280x. I make only 3.5 kh with djm34 sgminer from source.
Thanks

Absolutely... Thanks...
I have 270x's running @ 8kh/s
-w 10 -I 13 mem 1500 engine 1184 with 14.6 drivers

+1

Once more miners startup and the diff rises we should see more value.  There will be only 500k total and we are on block 809.  Hold what you have imo, or you gonna miss out on MOAR profit.