Topic: 【ANN】◢◣ Swipp ◢◣ Modern cryptocurrency ● X11 ● POW/POS ● Masternodes - page 13. (Read 19091 times)

Quote from: teamswipp on December 14, 2017, 10:01:23 AM

Quote from: hta on December 15, 2017, 10:16:44 PM

The old version runs MN, i see my IP on http://explorer.swippcoin.com/masternodes. Version 2.1.1.0 does not work

I doubt it's the wallet. No code in the part that registers the wallet has changed. Also, many masternodes are running 2.1.1.0 already.

It's probably the collateral that is wrong in some way... Remember, it has to be exactly 30k swipp.

Also, check the debug.log... If it's not starting you can usually get some tips there.

Yours, team swipp

Hi you
After 12h run, nothing is progressing, although at http://explorer.swippcoin.com/masternodes still see my IP.
I use the wallet v2.1.1.0: Yggdrasil.
How do I run MN?
https://imgur.com/a/SWkpq
https://imgur.com/a/ddC1q
https://imgur.com/a/w7YtN

Hi.

Open an issue on GitHub.

If it's not the collateral, it might be that the port for the masternode is not open in your firewall, that could also result in a -1 rank that doesn't change.

Yours, team swipp

I opened the port, I let the wallet run for hours, but still nothing progressed. Even in the tap SwipNodeNetwork only see each of my MN.
I do not know what to do now. My wallet is the latest version 2.1.1.0
https://imgur.com/a/brz5z
https://imgur.com/a/nq84C
https://imgur.com/a/X4kDL

Same for me

Me too

anupans

newbie

Activity: 58

Merit: 0

Quote from: teamswipp on December 15, 2017, 12:08:55 AM

Quote from: teamswipp on December 14, 2017, 10:01:23 AM

Quote from: teamswipp on December 15, 2017, 12:08:55 AM

The old version runs MN, i see my IP on http://explorer.swippcoin.com/masternodes. Version 2.1.1.0 does not work

I doubt it's the wallet. No code in the part that registers the wallet has changed. Also, many masternodes are running 2.1.1.0 already.

It's probably the collateral that is wrong in some way... Remember, it has to be exactly 30k swipp.

Also, check the debug.log... If it's not starting you can usually get some tips there.

Yours, team swipp

Hi you
After 12h run, nothing is progressing, although at http://explorer.swippcoin.com/masternodes still see my IP.
I use the wallet v2.1.1.0: Yggdrasil.
How do I run MN?
https://imgur.com/a/SWkpq
https://imgur.com/a/ddC1q
https://imgur.com/a/w7YtN

Hi.

Open an issue on GitHub.

If it's not the collateral, it might be that the port for the masternode is not open in your firewall, that could also result in a -1 rank that doesn't change.

Yours, team swipp

I opened the port, I let the wallet run for hours, but still nothing progressed. Even in the tap SwipNodeNetwork only see each of my MN.
I do not know what to do now. My wallet is the latest version 2.1.1.0
https://imgur.com/a/brz5z
https://imgur.com/a/nq84C
https://imgur.com/a/X4kDL

Same for me

altcoinix

member

Activity: 334

Merit: 13

We re updated our pool wallet to v2.1.1.0: Yggdrasil good minings

http://s1.altcoinix.com/swipp/public

hta

jr. member

Activity: 261

Merit: 6

A happy family is but an earlier heaven!

Can you make a detailed MN setup guide? Thanks a lot.

hta

jr. member

Activity: 261

Merit: 6

A happy family is but an earlier heaven!

Quote from: teamswipp on December 14, 2017, 10:01:23 AM

The old version runs MN, i see my IP on http://explorer.swippcoin.com/masternodes. Version 2.1.1.0 does not work

I doubt it's the wallet. No code in the part that registers the wallet has changed. Also, many masternodes are running 2.1.1.0 already.

It's probably the collateral that is wrong in some way... Remember, it has to be exactly 30k swipp.

Also, check the debug.log... If it's not starting you can usually get some tips there.

Yours, team swipp

Hi you
After 12h run, nothing is progressing, although at http://explorer.swippcoin.com/masternodes still see my IP.
I use the wallet v2.1.1.0: Yggdrasil.
How do I run MN?
https://imgur.com/a/SWkpq
https://imgur.com/a/ddC1q
https://imgur.com/a/w7YtN

Hi.

Open an issue on GitHub.

If it's not the collateral, it might be that the port for the masternode is not open in your firewall, that could also result in a -1 rank that doesn't change.

Yours, team swipp

I opened the port, I let the wallet run for hours, but still nothing progressed. Even in the tap SwipNodeNetwork only see each of my MN.
I do not know what to do now. My wallet is the latest version 2.1.1.0
https://imgur.com/a/brz5z
https://imgur.com/a/nq84C
https://imgur.com/a/X4kDL

teamswipp

member

Activity: 238

Merit: 10

Swipp - a modern cryptocurrency

FINAL REMINDER !!!

UPDATE YOUR Swipp WALLET !!!

We still have a some nodes running 2.0.x. Believe it or not, there are even one or two nodes still running the original wallet (1.1.1.1). Make sure you update to the latest release. After we reach block 140 000, old nodes will no longer be accepted onto the Swipp network! We are already at block 136 411, so it is approaching fast!

Yours, team swipp

teamswipp

member

Activity: 238

Merit: 10

Swipp - a modern cryptocurrency

Quote from: teamswipp on December 14, 2017, 10:01:23 AM

Quote from: teamswipp on December 14, 2017, 10:01:23 AM

The old version runs MN, i see my IP on http://explorer.swippcoin.com/masternodes. Version 2.1.1.0 does not work

I doubt it's the wallet. No code in the part that registers the wallet has changed. Also, many masternodes are running 2.1.1.0 already.

It's probably the collateral that is wrong in some way... Remember, it has to be exactly 30k swipp.

Also, check the debug.log... If it's not starting you can usually get some tips there.

Yours, team swipp

Hi you
After 12h run, nothing is progressing, although at http://explorer.swippcoin.com/masternodes still see my IP.
I use the wallet v2.1.1.0: Yggdrasil.
How do I run MN?
https://imgur.com/a/SWkpq
https://imgur.com/a/ddC1q
https://imgur.com/a/w7YtN

Hi.

Open an issue on GitHub.

If it's not the collateral, it might be that the port for the masternode is not open in your firewall, that could also result in a -1 rank that doesn't change.

Yours, team swipp

hta

jr. member

Activity: 261

Merit: 6

A happy family is but an earlier heaven!

The old version runs MN, i see my IP on http://explorer.swippcoin.com/masternodes. Version 2.1.1.0 does not work

I doubt it's the wallet. No code in the part that registers the wallet has changed. Also, many masternodes are running 2.1.1.0 already.

It's probably the collateral that is wrong in some way... Remember, it has to be exactly 30k swipp.

Also, check the debug.log... If it's not starting you can usually get some tips there.

Yours, team swipp

Hi you
After 12h run, nothing is progressing, although at http://explorer.swippcoin.com/masternodes still see my IP.
I use the wallet v2.1.1.0: Yggdrasil.
How do I run MN?
https://imgur.com/a/SWkpq
https://imgur.com/a/ddC1q
https://imgur.com/a/w7YtN

Sonanh1234

newbie

Activity: 58

Merit: 0

price is very low

teamswipp

member

Activity: 238

Merit: 10

Swipp - a modern cryptocurrency

Quote from: hta on December 14, 2017, 09:17:45 AM

The old version runs MN, i see my IP on http://explorer.swippcoin.com/masternodes. Version 2.1.1.0 does not work

I doubt it's the wallet. No code in the part that registers the wallet has changed. Also, many masternodes are running 2.1.1.0 already.

It's probably the collateral that is wrong in some way... Remember, it has to be exactly 30k swipp.

Also, check the debug.log... If it's not starting you can usually get some tips there.

Yours, team swipp

teamswipp

member

Activity: 238

Merit: 10

Swipp - a modern cryptocurrency

Quote from: Vituscc on December 14, 2017, 05:28:54 AM

Quote from: Vituscc on December 14, 2017, 05:28:54 AM

kindly instruct me to set up a SWIP masternode, i'm waiting for you

1) Start the wallet, go to “SwippNodes” menu item, and you will be presented with all running masternodes.
2) Click on “My SwippNodes” tab, then click on “Create” button to start creating your masternode.
3) A window will popup. Name your masternode in “Alias” field. In “Address” field type your external address:port
4) Click on button “Copy Address” and send 30000 SWP to that address. Wait 15 conformation then proceed with setup. Collateral address is your own address.
5) Go back to “SwippNodes” menu, select your Swipp masternode and click button “Get Config”.
6) You must create a file named swipp.conf. Paste the masternode config you copied before. Go to Swipp folder and place it.
https://imgur.com/ZEeRprz
7) Select your Swipp masternode and click button “Start” Then restart the wallet.

Thank you for the instruction.
Tap SwippNodes Network I only see my MN, At tap Send, I also do not see the button: Inputs ... like your wallet. My wallet is 2.1.1.0
Seems my MN is faulty, not running. What should I do?
https://imgur.com/a/WZSKf
https://imgur.com/a/tpVbU

You need to enable "advanced coin controls" in the settings in order to see the inputs.

Yours, team swipp

hta

jr. member

Activity: 261

Merit: 6

A happy family is but an earlier heaven!

The old version runs MN, i see my IP on http://explorer.swippcoin.com/masternodes. Version 2.1.1.0 does not work

hta

jr. member

Activity: 261

Merit: 6

A happy family is but an earlier heaven!

Quote from: teamswipp on December 14, 2017, 06:58:16 AM

kindly instruct me to set up a SWIP masternode, i'm waiting for you

1) Start the wallet, go to “SwippNodes” menu item, and you will be presented with all running masternodes.
2) Click on “My SwippNodes” tab, then click on “Create” button to start creating your masternode.
3) A window will popup. Name your masternode in “Alias” field. In “Address” field type your external address:port
4) Click on button “Copy Address” and send 30000 SWP to that address. Wait 15 conformation then proceed with setup. Collateral address is your own address.
5) Go back to “SwippNodes” menu, select your Swipp masternode and click button “Get Config”.
6) You must create a file named swipp.conf. Paste the masternode config you copied before. Go to Swipp folder and place it.
https://imgur.com/ZEeRprz
7) Select your Swipp masternode and click button “Start” Then restart the wallet.

Thank you for the instruction.
Tap SwippNodes Network I only see my MN, At tap Send, I also do not see the button: Inputs ... like your wallet. My wallet is 2.1.1.0
Seems my MN is faulty, not running. What should I do?
https://imgur.com/a/WZSKf
https://imgur.com/a/tpVbU

Vituscc

member

Activity: 64

Merit: 10

I would be happy to supply a video;

https://www.youtube.com/watch?v=dQw4w9WgXcQ

Grin

Yours, team swipp

joke appreciated, funny))
I ask the video not for myself, but for those people who even in pictures can not, yes, there are some Grin

teamswipp

member

Activity: 238

Merit: 10

Swipp - a modern cryptocurrency

Quote from: Vituscc on December 14, 2017, 06:32:34 AM

Quote from: teamswipp on December 14, 2017, 06:04:46 AM

God work Vituscc. We are doing a full wiki page on this with some pictures and information... We want to cover both the QT interface and the CLI interface.

Yours, team swipp

and please make a video))

I would be happy to supply a video;

https://www.youtube.com/watch?v=dQw4w9WgXcQ

Grin

Yours, team swipp

Vituscc

member

Activity: 64

Merit: 10

Quote from: teamswipp on December 14, 2017, 06:04:46 AM

God work Vituscc. We are doing a full wiki page on this with some pictures and information... We want to cover both the QT interface and the CLI interface.

Yours, team swipp

and please make a video))

teamswipp

member

Activity: 238

Merit: 10

Swipp - a modern cryptocurrency

Quote from: Vituscc on December 14, 2017, 05:28:54 AM

kindly instruct me to set up a SWIP masternode, i'm waiting for you

1) Start the wallet, go to “SwippNodes” menu item, and you will be presented with all running masternodes.
2) Click on “My SwippNodes” tab, then click on “Create” button to start creating your masternode.
3) A window will popup. Name your masternode in “Alias” field. In “Address” field type your external address:port
4) Click on button “Copy Address” and send 30000 SWP to that address. Wait 15 conformation then proceed with setup. Collateral address is your own address.
5) Go back to “SwippNodes” menu, select your Swipp masternode and click button “Get Config”.
6) You must create a file named swipp.conf. Paste the masternode config you copied before. Go to Swipp folder and place it.
https://imgur.com/ZEeRprz
7) Select your Swipp masternode and click button “Start” Then restart the wallet.

God work Vituscc. We are doing a full wiki page on this with some pictures and information... We want to cover both the QT interface and the CLI interface.

Yours, team swipp

Vituscc

member

Activity: 64

Merit: 10